HS 741521 Other articles, not threaded
Quick Answer: Copper nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, not threaded, imported under HS 741521 enter the UK at 0.00%, the EU at 3.00% ad valorem, and the US at 3.00% ad valorem, with preferential rates available for certain trading partners. This classification encompasses a variety of copper fasteners and small articles that are not screw-threaded. Importers should be aware of the varying duty rates across major markets, as detailed by CustomTariffs. Careful classification is crucial to ensure compliance and leverage any applicable trade agreements, particularly for the US market which offers a broad range of duty-free entry for qualifying countries.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415210000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415210000 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415210000 | 3% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7415.21?
Imports of Other articles, not threaded may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 741521 cover?
This subheading covers other articles of copper, not threaded, which are not insulated electrical parts. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category includes items such as copper rivets, copper pins, copper tacks, and copper staples that are not designed for fastening threads. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database provide further detail, generally including items like copper nails, copper washers, and copper studs that do not possess screw threads.
What falls outside HS 741521?
The following products are excluded from HS 741521: threaded copper articles such as bolts and screws (classified under 7415.10), insulated electrical parts made of copper (typically classified in Chapter 85), and copper wire or cable (classified in Chapter 74 based on form and function). Also excluded are copper powder, granules, and flakes (Chapter 74), and copper bars, rods, and profiles (Chapter 74). Items like copper springs or copper fasteners with specialized functions not covered by the general description are also likely classified elsewhere.
What are common classification mistakes for HS 741521?
A common error is misinterpreting the "not threaded" exclusion, leading to the classification of threaded copper fasteners like screws or bolts under this subheading. Another mistake involves confusing these articles with insulated electrical components, which are specifically excluded. Adherence to General Interpretative Rule 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial. For instance, copper nails without threads are correctly classified here, while copper screws are not.
How should importers classify products under HS 741521?
The correct procedure for classifying products under HS 741521 involves a detailed examination of the article's physical characteristics and intended use. Importers and customs brokers must first consult the WCO HS Nomenclature and then cross-reference with official tariff schedules like the USITC HTS or EU TARIC. Key considerations include whether the article is made of copper, if it is threaded, and if it serves as an insulated electrical part. Accurate product descriptions and technical specifications are vital for correct classification.
How is the duty calculated for products under HS 741521?
A shipment of 1,000 copper rivets, each weighing approximately 5 grams (totaling 5 kg), declared at a customs value of $500 USD, would attract a US duty. Assuming a Most Favored Nation (MFN) duty rate of 1.7% ad valorem as per the USITC Harmonized Tariff Schedule, the duty would be $8.50 (1.7% × $500). If the duty were based on weight, for example, $0.20 per kilogram, the duty would be $1.00 (0.20 × 5 kg). The specific duty calculation depends on the tariff's structure for this item.
Which trade agreements reduce duties for HS 741521?
Several free trade agreements may reduce the applicable duty rate for HS 741521, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. The UK Global Tariff may offer preferential rates for goods originating from countries with which the UK has a trade agreement, such as a Free rate under the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) for eligible countries. Documentation typically includes a self-certified origin statement for USMCA or a EUR.1 movement certificate for certain other agreements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 741521, 'Other articles, not threaded'?
The Most Favored Nation (MFN) duty rate for HS code 741521 can vary significantly depending on the importing country. For example, the United States applies a 3.00% ad valorem duty. The European Union, under its TARIC system, may have rates ranging from 0.00% to 4.50% depending on specific subheadings and origin. The UK Trade Tariff also lists various rates. It is crucial to consult the specific tariff schedule of the destination country for the exact rate applicable to your import.
How is the duty calculated for HS code 741521?
Duty calculation for HS code 741521 is typically based on the value of the goods (ad valorem) or a combination of value and quantity (compound duty). For instance, if the MFN duty rate is 3.00% ad valorem, and you import articles valued at $10,000 USD, the duty would be $10,000 USD * 3.00% = $300 USD. Always verify if the duty is purely ad valorem, specific (per unit), or a combination, as specified in the importing country's tariff.
What are the classification criteria for 'Other articles, not threaded' under HS code 741521?
HS code 741521 covers copper or copper-alloy articles that are not threaded and do not fall under more specific headings within Chapter 74 of the Harmonized System. This generally includes items like copper nails, tacks, drawing pins, staples, and similar articles, provided they are not threaded (like screws or bolts). The key is that they must be made primarily of copper or copper alloys and not be specifically classified elsewhere, such as in headings for wire, cable, or fasteners with threads.
Which trade agreements offer preferential duty rates for HS code 741521?
Many trade agreements can provide preferential duty rates for HS code 741521. For example, the United States offers duty-free entry (0.00%) for goods originating from countries with which it has specific trade agreements, often indicated by codes like 'A' (Australia), 'CL' (Chile), 'CO' (Colombia), 'KR' (Korea), 'MA' (Morocco), 'PA' (Panama), 'PE' (Peru), and 'SG' (Singapore) in its tariff schedule. The EU and UK also have extensive lists of preferential rates under agreements with various countries. Importers must ensure they have the necessary proof of origin documentation to claim these benefits.
What documentation is typically required for importing articles classified under HS code 741521?
Standard documentation for importing articles under HS code 741521 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to benefit from preferential duty rates under Free Trade Agreements (FTAs), a valid Certificate of Origin or other acceptable proof of origin is mandatory. Depending on the importing country and the specific nature of the goods, additional declarations or permits might be required to ensure compliance with national regulations.