HS 741510 Nails and tacks, drawing pins, staples and similar articles
Quick Answer: Nails and tacks, drawing pins, staples, and similar articles imported under HS 741510 enter the UK duty-free, the EU at 4.00% ad valorem, and the US with varying rates including Free, 2.5% ad valorem, and 45% ad valorem depending on the country of origin. This classification specifically covers small metal fasteners, typically made of copper or copper alloys, used for joining materials or for stationery purposes. Importers should be aware of the significant duty rate disparities across major markets, necessitating careful consideration of sourcing and destination for optimal trade compliance. According to CustomTariffs data, understanding these jurisdictional differences is crucial for accurate duty assessment and cost management.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415100000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415100000 | 4.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7415100000 | 2.5% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7415.10?
Imports of Nails and tacks, drawing pins, staples and similar articles may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 741510 cover?
This subheading covers various small articles of copper or copper alloys, specifically nails and tacks, drawing pins, and staples, as well as similar articles. According to the World Customs Organization's Harmonized System Explanatory Notes, these items are characterized by their pointed ends designed for fastening or marking. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC system align with this definition, ensuring consistent classification for these copper fasteners and stationery items.
What falls outside HS 741510?
The following products are excluded from HS 741510: larger copper fasteners such as bolts and screws (typically classified under HS 741520 if not of copper alloy, or other relevant headings if of copper alloy and not specifically enumerated), and articles of copper wire that are not shaped into nails, tacks, pins, or staples, such as plain wire or wire mesh. Also excluded are decorative copper items or components not intended for fastening purposes, even if they share a similar shape.
What are common classification mistakes for HS 741510?
A common error is misclassifying copper-plated steel nails or tacks under this heading. According to General Rule of Interpretation (GRI) 3(b), when goods are mixed, they are classified according to the material that gives them their essential character. If the steel component predominates by weight or value, the article would likely be classified under a steel heading, not copper. Importers must carefully consider the material composition and the primary function of the article.
How should importers classify products under HS 741510?
The correct procedure for classifying products under HS 741510 involves a thorough examination of the product's material composition, form, and intended use. Importers and customs brokers should consult the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and review the Explanatory Notes from the WCO. Verification of whether the article is indeed made of copper or copper alloy and fits the description of nails, tacks, drawing pins, or staples is crucial.
How is the duty calculated for products under HS 741510?
A shipment of 10 kilograms of copper drawing pins, declared at a customs value of $200 USD, would attract a US duty of $14.00. This is calculated using the Most Favored Nation (MFN) rate of 7.0% ad valorem, applied to the declared value ($200 USD × 0.07 = $14.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTSUS) for subheading 741510.0000.
Which trade agreements reduce duties for HS 741510?
Several free trade agreements may reduce the applicable duty rate for HS 741510, including the United States-Mexico-Canada Agreement (USMCA), which can result in a rate of Free for eligible originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer preferential rates, often Free, for eligible goods from developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A is typically required, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 741510 (nails, tacks, drawing pins, staples, etc.)?
The Most Favored Nation (MFN) duty rate for HS code 741510 can vary. For example, the U.S. tariff rate is often 3.5% ad valorem. However, preferential rates under various trade agreements can significantly reduce or eliminate duties. For instance, under the USMCA (formerly NAFTA), many originating goods may enter duty-free. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment based on the origin of the goods and applicable trade agreements.
How is the duty calculated for HS code 741510 if the duty rate is 3.5% ad valorem and the shipment value is $10,000?
The duty calculation for an ad valorem rate is based on the customs value of the imported goods. If the duty rate is 3.5% ad valorem and the value of the imported articles under HS 741510 is $10,000, the duty would be calculated as follows: Duty = Value × Duty Rate. Therefore, Duty = $10,000 × 0.035 = $350. This amount is payable to the customs authorities.
What are the key classification criteria for articles to be classified under HS code 741510?
HS code 741510 covers 'Nails and tacks, drawing pins, staples and similar articles' of copper or of copper base alloys. The primary criterion is the material: the articles must be predominantly made of copper or its alloys. The form and function are also critical; they must be articles resembling nails, tacks, pins, or staples in shape and intended use, such as for fastening or fixing. Items that are significantly different in form or function, even if made of copper, would be classified elsewhere.
Are there specific documentation requirements for importing goods under HS code 741510?
While specific requirements can vary by importing country, generally, importers and customs brokers should be prepared to provide a commercial invoice detailing the value, quantity, and description of the goods. A packing list is also standard. Crucially, if claiming preferential duty rates under a trade agreement (e.g., USMCA, EU Free Trade Agreements), a Certificate of Origin or other proof of origin documentation, as stipulated by the agreement, is mandatory. A manufacturer's affidavit attesting to the copper content might also be requested in certain circumstances.
How do trade agreements like the USMCA or EU Free Trade Agreements impact the import duties for HS code 741510?
Trade agreements can significantly alter the duty rates for goods classified under HS code 741510. For example, if the nails or staples are determined to be originating goods under the USMCA, they may qualify for duty-free entry into the United States, Canada, or Mexico, provided the importer can present valid proof of origin. Similarly, agreements between the EU and partner countries can offer reduced or zero duties on originating copper fasteners. Importers must verify the 'origin' of their goods against the specific rules of origin within the relevant trade agreement to benefit from these preferential rates.