HS 741220 Of copper alloys
Quick Answer: Copper alloy tubes and pipes imported under HS 741220 enter the UK at 0.00%, the EU at 5.20% ad valorem, and the US with rates varying significantly by trade agreement, ranging from 3% to 49% ad valorem, with many agreements offering duty-free entry. This classification covers hollow products of copper alloys, such as brass or bronze, that have been shaped into tubes or pipes, whether or not they have undergone further processing like cutting to length or joining. Importers should be aware of the substantial duty differentials and the impact of preferential trade agreements on US entry. CustomTariffs aggregates this data, highlighting the importance of verifying specific rates based on origin and destination.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7412200000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7412200000 | 5.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7412200015 | — | — | ["kg"] |
| 7412200035 | — | — | ["kg"] |
| 7412200065 | — | — | ["kg"] |
| 74122000 | 3% | Free (18 programs) | — |
| 7412200025 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7412.20?
Imports of Of copper alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 741220 cover?
This subheading covers tubes, pipes, and hollow profiles, of copper alloys, which are not further worked than drawn or extruded. According to the World Customs Organization's Harmonized System Explanatory Notes, this category includes items such as seamless copper alloy tubes used in refrigeration, plumbing, and heat exchangers. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that the material composition must be primarily copper with other elements alloyed, and the manufacturing process limited to drawing or extrusion without additional shaping or finishing beyond what is inherent to these processes.
What falls outside HS 741220?
The following products are excluded from HS 741220: tubes, pipes, and hollow profiles that have undergone further working, such as bending, flaring, threading, or welding, as these would be classified under other headings. For instance, copper alloy tubes that are welded would fall under heading 7407. Additionally, solid copper or copper alloy bars, rods, and profiles, which are not hollow, are classified under heading 7407. Finished articles made from copper alloy tubes, such as faucets or fittings, are also excluded and classified according to their specific function or material composition.
What are common classification mistakes for HS 741220?
A common error is misinterpreting the degree of working performed on the copper alloy tubes. General Interpretative Rule 1 (GIR 1) of the Harmonized System emphasizes that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. Importers may incorrectly classify tubes that have been mechanically shaped beyond simple drawing or extrusion, or those that have been treated with surface coatings or plating, under this subheading. It is crucial to distinguish between the basic manufacturing process of drawing or extruding and subsequent value-adding operations.
How should importers classify products under HS 741220?
The correct procedure for classifying products under HS 741220 involves a thorough examination of the product's material composition and manufacturing process. Importers and customs brokers must first confirm that the product is made of a copper alloy. Subsequently, they must verify that the product is in the form of a tube, pipe, or hollow profile and that its working is limited to drawing or extrusion. Consulting official tariff schedules, such as the USITC HTS or the UK Trade Tariff, and reviewing the relevant Explanatory Notes from the WCO is essential for accurate classification.
How is the duty calculated for products under HS 741220?
A shipment of 1,000 kilograms of brass alloy (copper-zinc alloy) tubing, specifically drawn, with a declared customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, as published in the USITC Harmonized Tariff Schedule (HTS) for subheading 7412.20.00. The calculation is: 3.0% × $5,000 USD = $150.00 USD. This rate applies to goods imported from countries not benefiting from preferential trade agreements.
Which trade agreements reduce duties for HS 741220?
Several free trade agreements may reduce the applicable duty rate for HS 741220, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement is typically required, detailing the product's eligibility. Additionally, for imports into the European Union, originating goods from countries with a Free Trade Agreement (FTA) with the EU may benefit from reduced or zero duties, often requiring an EUR.1 movement certificate or an origin declaration by the exporter.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 741220, 'Of copper alloys'?
The Most Favored Nation (MFN) duty rate for HS code 741220 can vary significantly by country. For instance, the United States applies a 3.5% ad valorem duty. The European Union, under the TARIC system, often has a rate around 2.7% ad valorem, though this can be subject to specific product types and origin. The UK Trade Tariff also shows varying rates, often around 2.7% ad valorem for many origins. It is crucial to consult the specific tariff schedule of the importing country for the exact rate applicable to your shipment.
How is the duty calculated for HS code 741220, using an example?
Duty calculation typically uses an ad valorem rate, which is a percentage of the declared customs value of the goods. For example, if a shipment of copper alloy tubes (HS 741220) is valued at $10,000 USD and the applicable MFN duty rate is 3.5%, the import duty would be calculated as: $10,000 (Value) × 0.035 (Duty Rate) = $350 USD. Some tariffs may also include specific duties (e.g., per kilogram) or a combination of ad valorem and specific duties, which would require a different calculation method.
What are the classification criteria to ensure goods are correctly classified under HS code 741220?
HS code 741220 covers 'tubes and pipes' of copper alloys. The primary classification criterion is the material composition: the goods must be primarily made of copper alloys. An alloy is defined as a mixture of two or more elements where at least one is a metal, and the resulting mixture has metallic properties. The form factor is also critical; the goods must be in the form of tubes or pipes. Items that are not alloys, or are not in tube or pipe form (e.g., sheets, bars, or finished articles like faucets), would be classified under different HS codes.
Which trade agreements commonly offer preferential duty rates for HS code 741220?
Many trade agreements can provide preferential duty rates, often reducing or eliminating duties for goods originating from partner countries. For example, under the USMCA (United States-Mexico-Canada Agreement), goods of Canadian or Mexican origin may receive preferential treatment. The EU has numerous Free Trade Agreements (FTAs) with countries like Switzerland, Norway, and South Korea, which could offer reduced rates. The UK also has FTAs post-Brexit. Importers must verify the rules of origin for each specific trade agreement to determine eligibility for preferential rates, which are often listed with codes like 'A*', 'AU', 'B', 'CL', 'KR', 'SG' in tariff schedules, indicating duty-free or reduced rates for specific partner countries.
What documentation is typically required for importing goods classified under HS code 741220?
Standard import documentation is generally required for HS code 741220. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim any preferential duty rates under a trade agreement, a Certificate of Origin (COO) or a declaration of origin, compliant with the specific agreement's rules, is mandatory. Depending on the importing country and the specific nature of the copper alloy tubes or pipes, additional certifications related to material composition, quality standards, or safety may be requested by customs authorities.