HS 741022 Of copper alloys
Quick Answer: Copper alloy foil, whether or not printed, backed or similarly prepared, imported under HS 741022 enters the UK at 0.00%, the EU at 5.20% ad valorem, and the US at 1.5% ad valorem, with preferential duty-free entry available from several Free Trade Agreement partners. This classification specifically covers foils made from copper alloys, distinct from pure copper foils. Importers and customs brokers should verify specific alloy compositions and origin country preferential treatment to ensure accurate duty application. CustomTariffs aggregates this data to assist in compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7410220000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7410220000 | 5.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7410220000 | 1.5% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7410.22?
Imports of Of copper alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 741022 cover?
This subheading covers foil of refined copper alloys, which are typically less than 0.15 mm in thickness. According to the World Customs Organization's Harmonized System Nomenclature, this category is distinct from pure copper foil. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that the key characteristic is the presence of alloying elements beyond trace amounts, impacting the material's properties and thus its classification under heading 7410.
What falls outside HS 741022?
The following products are excluded from HS 741022: foil of refined copper (classified under 7410.10), foil of copper alloys exceeding 0.15 mm in thickness, and products that are not in foil form, such as wire or bars. Additionally, composite materials where copper alloy foil is merely a component and not the primary material, or where it is bonded to other materials in a way that changes its essential character, would be classified elsewhere, often in chapters related to the dominant material or the finished product.
What are common classification mistakes for HS 741022?
A common error is misinterpreting the definition of "alloy" versus "refined copper." Importers may incorrectly classify foil containing minor impurities or trace elements as an alloy, or conversely, classify a true alloy foil under the pure copper subheading. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial. The specific composition and the presence of alloying elements are determinative.
How should importers classify products under HS 741022?
The correct procedure for classifying products under HS 741022 involves a detailed examination of the material's composition and physical form. Importers and customs brokers must verify that the foil is indeed made of a copper alloy and that its thickness does not exceed 0.15 mm. Consulting the specific national tariff schedule, such as the USITC HTS or the UK Trade Tariff, and reviewing the explanatory notes for Chapter 74 and heading 7410 is essential to confirm the correct subheading.
How is the duty calculated for products under HS 741022?
A roll of brass alloy foil (e.g., 70% copper, 30% zinc) weighing 50 kg and declared at a customs value of $1,000 USD would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.5% ad valorem, applied to the declared customs value ($1,000 USD × 0.035 = $35.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for subheading 7410.22.10.
Which trade agreements reduce duties for HS 741022?
Several free trade agreements may reduce the applicable duty rate for HS 741022, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries like Japan. Documentation typically required includes a self-certified origin statement for USMCA or a specific origin declaration for CPTPP, depending on the importing country's requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 741022, 'Aluminium foil of a thickness exceeding 0.2 mm', specifically for copper alloys?
HS code 7410.22 covers aluminium foil of a thickness exceeding 0.2 mm. For copper alloys, the relevant chapter is Chapter 74 (Copper and articles thereof). If you are referring to aluminium foil made from copper alloys, this classification would be incorrect. Assuming you meant aluminium foil, the Most Favored Nation (MFN) duty rate for aluminium foil of a thickness exceeding 0.2 mm is typically 0.00% ad valorem. However, preferential rates may apply under various trade agreements. For instance, under the USMCA (United States-Mexico-Canada Agreement), the rate is Free. Always consult the latest tariff schedule for the importing country, such as the US Harmonized Tariff Schedule (USHTS) maintained by the USITC, for definitive rates and applicable trade agreements.
How is the import duty for HS code 741022 calculated for copper alloys, and can you provide an example?
HS code 7410.22 pertains to aluminium foil. If you are importing aluminium foil of a thickness exceeding 0.2 mm, and the duty rate is, for example, 0.00% MFN, the calculation is straightforward: Duty = Value of Goods × Duty Rate. For a shipment valued at $10,000, the duty would be $10,000 × 0.00% = $0.00. If a specific trade agreement grants a preferential rate, that rate would be applied. For example, if a preferential rate of 1.5% applied to a shipment valued at $10,000, the duty would be $10,000 × 1.5% = $150.00. It is crucial to verify the correct HS code and applicable duty rate for your specific product and origin.
What are the classification criteria for HS code 741022, and how does it apply to copper alloys?
HS code 7410.22 specifically covers 'Aluminium foil of a thickness exceeding 0.2 mm'. This code is within Chapter 76 (Aluminium and articles thereof). Therefore, it is not applicable to products made from copper alloys. Products made from copper alloys would fall under Chapter 74 of the Harmonized System. For example, copper foil of a thickness exceeding 0.2 mm would be classified under HS code 7410.12 (Copper foil, of a thickness exceeding 0.2 mm). Importers and customs brokers must ensure the material composition accurately dictates the correct HS chapter and code.
Which trade agreements commonly offer preferential duty rates for products classified under HS code 741022, and what documentation is needed?
For HS code 7410.22 (Aluminium foil of a thickness exceeding 0.2 mm), several trade agreements may offer preferential duty rates. Examples include the USMCA (United States-Mexico-Canada Agreement) where the rate is Free, and agreements with countries like Australia (AU), Chile (CL), and Japan (JP) which often provide duty-free or reduced-duty access. To claim preferential treatment, importers typically need a 'Certificate of Origin' or a 'Declaration of Origin' issued by the exporter, which certifies that the goods meet the rules of origin stipulated in the specific trade agreement. The exact documentation requirements can vary by agreement and importing country. Always refer to the official text of the trade agreement and the importing country's customs regulations for precise details.
Are there specific documentation requirements for importing aluminium foil under HS code 7410.22 from countries with preferential trade agreements?
Yes, to benefit from preferential duty rates under trade agreements for HS code 7410.22 (Aluminium foil of a thickness exceeding 0.2 mm), specific documentation is generally required. The most common document is a Certificate of Origin (COO) or a declaration of origin on the commercial invoice or a separate document. This document must be completed by the exporter and certify that the goods originate from a country that is a party to the relevant trade agreement (e.g., USMCA, CPTPP, etc.). The COO must contain specific information, including a description of the goods, the importing and exporting parties, and a statement of origin. Importers should consult the specific trade agreement and the customs regulations of the importing country for the exact format and content requirements of the COO. Failure to provide the correct documentation can result in the denial of preferential treatment and the assessment of standard MFN duties.