HS 741012 Of copper alloys
Quick Answer: Foil of copper alloys imported under HS 741012 enters the UK at 0.00%, the EU at 5.20%, and the US with rates varying from Free to 6.5% depending on origin. This code specifically covers foil of copper alloys, meaning thin, flat sheets of copper mixed with other metals. Importers should be aware of the significant duty rate discrepancies between major trading blocs, particularly the preferential treatment for certain US trading partners. CustomTariffs aggregates this data, highlighting the importance of origin verification for US entries. Exporters and customs brokers must carefully determine the correct alloy composition and country of origin to ensure accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7410120000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7410120000 | 5.20 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 74101200 | 1% | Free (18 programs) | — |
| 7410120060 | — | — | ["kg"] |
| 7410120030 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7410.12?
Imports of Of copper alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 741012 cover?
This subheading covers foil of copper alloys, which are defined as metals containing by weight more than 10% of copper, but not containing by weight more than 5% of nickel. According to the World Customs Organization's Harmonized System Nomenclature, this category specifically excludes foil of refined copper. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC system further delineate this by focusing on the alloy composition, ensuring that only materials meeting specific copper and other metal content thresholds are classified here.
What falls outside HS 741012?
The following products are excluded from HS 741012: foil of refined copper (classified under 7410.11), foil of copper with nickel content exceeding 5% (which may fall under other headings depending on the primary metal), and composite materials where copper alloy foil is merely a component of a more complex product. For instance, laminated materials with a copper alloy foil bonded to plastic or paper, where the foil is not the principal constituent, would be classified based on the overall composition or the dominant material as per General Rule of Interpretation (GRI) 3.
What are common classification mistakes for HS 741012?
A common error is misinterpreting the alloy composition. Importers may incorrectly classify foil of refined copper under this subheading or fail to identify copper alloys with nickel content exceeding 5% as belonging to a different classification. Additionally, confusion can arise with composite materials, where the foil is not the sole or principal component. Adherence to GRI 3, which dictates classification based on essential character, is crucial to avoid misclassification of such complex products.
How should importers classify products under HS 741012?
The correct procedure for classifying products under HS 741012 involves a detailed examination of the material's composition. Importers and customs brokers must verify that the foil is made from a copper alloy containing more than 10% copper and not more than 5% nickel. Reviewing the manufacturer's specifications, chemical analysis reports, and consulting the relevant sections of the WCO HS Nomenclature, USITC HTS, or EU TARIC is essential to confirm the alloy's precise makeup and ensure accurate classification.
How is the duty calculated for products under HS 741012?
A shipment of 1,000 kg of brass foil (a copper alloy) declared at a customs value of $15,000 USD would attract a US duty of $450.00. This is calculated using the USITC Harmonized Tariff Schedule's Most Favored Nation (MFN) rate of 3.0% ad valorem, applied to the customs value ($15,000 USD × 0.03 = $450.00). For other jurisdictions, specific rates and calculation methods may apply, such as unit-based duties or different ad valorem percentages.
Which trade agreements reduce duties for HS 741012?
Several free trade agreements may reduce the applicable duty rate for HS 741012, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) also offers preferential rates, potentially Free, for originating goods from member countries like Vietnam. Documentation typically required includes a self-certified origin declaration for USMCA or a specific origin certificate for other agreements, depending on the jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 7410.12, covering copper-alloy foil?
The Most Favored Nation (MFN) duty rate for HS code 7410.12, 'Of copper alloys', can vary. For instance, the United States applies a 3.5% ad valorem duty. The European Union's TARIC system may show rates such as 2.5% ad valorem. The UK Trade Tariff also lists duties, which can fluctuate. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate applicable at the time of import.
How is HS code 7410.12 'Of copper alloys' determined, and what distinguishes it from pure copper foil?
HS code 7410.12 is designated for foil of copper alloys, meaning the copper content is alloyed with other metals (e.g., zinc for brass, tin for bronze). Pure copper foil falls under HS code 7410.11. Classification relies on the material composition. If the foil contains alloying elements that significantly alter its properties from pure copper, it is classified under 7410.12. Laboratory analysis or manufacturer's declarations detailing the alloy composition are often required for customs verification.
Which trade agreements offer preferential duty rates for HS code 7410.12, and what documentation is needed?
Several trade agreements can provide preferential duty rates for HS code 7410.12. For example, under the USMCA, goods originating from Canada or Mexico may receive duty-free treatment. The EU has agreements with various countries that could reduce or eliminate duties. To claim preferential treatment, importers typically need a Certificate of Origin or a declaration from the exporter, demonstrating that the goods meet the rules of origin stipulated in the relevant trade agreement. Always verify the specific requirements of the applicable free trade agreement and the importing country's customs regulations.
Can you provide an example of how import duty for HS code 7410.12 is calculated?
Certainly. Let's assume an importer brings 1,000 kilograms of copper-alloy foil classified under HS 7410.12 into the United States, where the MFN duty rate is 3.5% ad valorem. If the declared customs value of the foil is $15,000 USD, the duty calculation would be: Duty = Value × Duty Rate. Duty = $15,000 USD × 0.035 = $525 USD. In this scenario, the importer would owe $525 USD in duties.
What specific documentation is generally required when importing goods under HS code 7410.12?
Standard documentation for importing goods under HS code 7410.12 typically includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill for transport; and a customs declaration. For HS 7410.12, specific attention should be paid to documentation proving the material is indeed a copper alloy and not pure copper, such as a certificate of analysis or a manufacturer's statement of composition. If claiming preferential treatment, the relevant Certificate of Origin is also mandatory.