HS 740929 Other
Quick Answer: Copper plates, sheets, and strip, not further worked than rectangular (including square), of a thickness exceeding 0.15 mm, not perforated, not shaped, and not otherwise worked than cut to shape, enter the EU at 4.80% ad valorem and the UK at 0.00% ad valorem. In the United States, this category, classified under HS 740929, faces a Most Favored Nation (MFN) duty rate of 1.9% ad valorem, with numerous preferential rates available for specific trading partners. This residual "other" classification within Chapter 74 typically captures copper products that do not fit more specific subheadings, requiring careful verification of product characteristics. According to CustomTariffs, importers must confirm the precise dimensions and any minor working to ensure correct classification and duty application.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7409290000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7409290000 | 4.80 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 74092900 | 1.9% | Free (17 programs) | — |
| 7409290050 | — | — | ["kg"] |
| 7409290090 | — | — | ["kg"] |
| 7409290010 | — | — | ["kg"] |
| 7409290075 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7409.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 740929 cover?
This subheading covers other plates, sheets, and strip of copper alloys, not further worked than clad, or clad and plastic coated, when they do not fall under more specific subheadings within heading 7409. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this "Other" category is a residual provision for articles of copper alloys that meet the general description of plates, sheets, and strip but are not specifically enumerated elsewhere in the heading. For instance, this could include clad materials where the cladding is not a primary defining characteristic for classification under a more specific subheading.
What falls outside HS 740929?
The following products are excluded from HS 740929: plates, sheets, and strip of copper alloys that are perforated, cut to shape, or otherwise processed beyond simple cladding or plastic coating. Also excluded are articles of copper alloys that are not in the form of plates, sheets, or strip, such as wires, tubes, or bars. For example, copper alloy foil less than 0.1 mm thick is typically classified under heading 7409.10 or 7409.21, depending on the alloy, and not under this residual "Other" category.
What are common classification mistakes for HS 740929?
A common error is misinterpreting the scope of "other" under heading 7409, leading to the incorrect classification of products that should fall under more specific subheadings or even different headings entirely. For instance, if a plate of copper alloy is embossed or otherwise worked beyond simple cladding, it may not qualify for heading 7409 and could be classified under a different heading based on the nature of the working. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial.
How should importers classify products under HS 740929?
The correct procedure for classifying products under HS 740929 involves a thorough examination of the product's composition, form, and any working performed. Importers and customs brokers must first determine if the product is indeed a plate, sheet, or strip of a copper alloy. If it is, they must then consult the specific subheadings within 7409 to see if a more precise classification exists. If no other subheading accurately describes the product, and it meets the general criteria of heading 7409, then 740929 may be applicable.
How is the duty calculated for products under HS 740929?
A shipment of 500 kilograms of clad copper alloy plates, declared at a customs value of $10,000 USD, would attract a US duty of $1,000.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared customs value. The calculation is: 10% of $10,000 USD = $1,000.00. This rate is published in the USITC Harmonized Tariff Schedule of the United States (HTSUS) under subheading 7409.29.0000.
Which trade agreements reduce duties for HS 740929?
Several free trade agreements may reduce the applicable duty rate for HS 740929, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from certain developing countries. To claim these preferences, a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries is typically required, depending on the specific jurisdiction and agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 740929, specifically for 'Other' plates, sheets, and strip of copper alloys?
The Most Favored Nation (MFN) duty rate for HS code 740929 is 4.80% ad valorem. However, preferential duty rates are available under various trade agreements. For example, imports from countries such as Australia (AU), Canada (CA), Chile (CL), South Korea (KR), and Singapore (SG) may be eligible for Free entry (0.00%) under specific preferential trade agreements, provided all rules of origin are met. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment.
How is the import duty for HS code 740929 calculated, and can you provide an example?
The duty for HS code 740929 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a shipment of copper alloy plates valued at $10,000 is imported under the MFN rate of 4.80%, the calculated duty would be $10,000 * 0.0480 = $480.00. Always ensure the declared customs value is accurate and includes all relevant costs as per customs regulations.
What are the classification criteria that distinguish HS code 740929 ('Other') from other subheadings under 7409?
HS code 740929 is a residual category, meaning it applies to plates, sheets, and strip of copper alloys that do not meet the specific criteria of other subheadings within heading 7409. Heading 7409 covers 'Plates, sheets and strip, of copper alloys'. The preceding subheadings (e.g., 7409.11 for copper-nickel ('cupro-nickel') base alloys, 7409.19 for other copper-nickel alloys) specify particular alloy compositions. Therefore, 740929 is used for all other copper alloy plates, sheets, and strip not otherwise specified, provided they are of a thickness exceeding 0.15 mm. For classification guidance, refer to the Explanatory Notes of the Harmonized System (HS) and national tariff rulings.
What documentation is typically required for importing goods classified under HS code 740929?
Standard documentation for importing goods under HS code 740929 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin. If claiming preferential duty rates, a specific preferential trade agreement certificate of origin or declaration is mandatory. Depending on the importing country and the specific nature of the copper alloy, additional certifications related to material composition, quality standards, or environmental compliance might be requested by customs authorities.
Which common trade agreements offer preferential duty rates for HS code 740929, and how can importers verify eligibility?
Several trade agreements can provide preferential duty rates for HS code 740929. Examples include the USMCA (United States-Mexico-Canada Agreement), CAFTA-DR (Dominican Republic-Central America Free Trade Agreement), and bilateral agreements with countries like South Korea, Chile, and Singapore. To verify eligibility, importers must ensure the goods meet the specific rules of origin stipulated in the relevant trade agreement. This often involves confirming the country of origin of the materials and the extent of processing within the partner country. Importers should consult the text of the applicable trade agreement and obtain a valid Certificate of Origin from the exporter.