HS 740919 Other
Quick Answer: Copper plates, sheets, and strip, of a thickness exceeding 0.15 mm, not further worked than perforated, not backed, not laminated, not similarly processed, and not having the character of articles of heading 7409.19, enter the UK at 0.00%, the EU at 4.80% ad valorem, and the US with rates ranging from 3% to 48% ad valorem, with numerous preferential rates available. This residual classification applies to copper products meeting specific thickness and processing criteria that do not fit into more specific subheadings within Chapter 74. Importers should consult specific trade agreements and the relevant customs authority for precise duty application. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7409190000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7409190000 | 4.80 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7409191000 | 3% | Free (17 programs) | ["kg"] |
| 7409199000 | 3% | Free (17 programs) | ["kg"] |
| 740919 | — | — | — |
| 7409195000 | 1% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7409.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 740919 cover?
This subheading covers other plates, sheets, strip, and foil of copper, not elsewhere specified within heading 7409. According to the World Customs Organization's Harmonized System Nomenclature, this category is for products of copper that do not fit the more specific descriptions of other subheadings under 7409, such as those clad with precious metal or those of a specific thickness. For example, in the US HTS, it would include copper plates exceeding 0.5 mm in thickness but not otherwise defined. The EU TARIC system also reflects this residual nature for copper forms not explicitly detailed elsewhere in the chapter.
What falls outside HS 740919?
The following products are excluded from HS 740919: copper plates, sheets, strip, and foil that are clad with precious metal, which are classified under heading 7106 or 7112. Additionally, copper powder and flakes, as well as copper wire, are classified in different headings. Products of copper in other forms, such as bars, rods, and profiles (heading 7407), or tubes and pipes (heading 7411), are also explicitly excluded from this subheading, ensuring a precise classification based on the product's physical form and composition.
What are common classification mistakes for HS 740919?
A common error is misinterpreting the thickness criteria for plates and sheets. For instance, classifying copper sheeting thinner than 0.5 mm under this subheading when it should be classified as foil under 7410.90. Furthermore, confusion can arise with semi-finished products of copper alloys, which would be classified under heading 7403. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to avoid misclassification and ensure the correct tariff line is applied based on the most specific description.
How should importers classify products under HS 740919?
The correct procedure for classifying products under HS 740919 involves a detailed examination of the product's physical characteristics, specifically its form (plate, sheet, strip, or foil) and thickness. Importers and customs brokers must consult the official tariff schedule of the importing country, such as the USITC Harmonized Tariff Schedule (HTS) or the EU TARIC database, to verify the precise definitions and any specific exclusions. Cross-referencing with the WCO HS Explanatory Notes provides further guidance on distinguishing between different forms of copper and their respective classifications.
How is the duty calculated for products under HS 740919?
A shipment of 1,000 kilograms of copper plates, each measuring 1 mm in thickness and declared at a customs value of $15,000 USD, would attract a US duty. Assuming the Most Favored Nation (MFN) duty rate for HS 740919 in the US HTS is 1.5% ad valorem, the duty would be calculated as 1.5% of $15,000, resulting in a duty of $225.00. This calculation is based on the ad valorem rate applied to the declared customs value, as published by the USITC.
Which trade agreements reduce duties for HS 740919?
Several free trade agreements may reduce the applicable duty rate for HS 740919, including the United States-Mexico-Canada Agreement (USMCA) and the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP). Under USMCA, originating copper products from Canada or Mexico may enter the US duty-free. For CPTPP, originating products from countries like Australia or Singapore could also benefit from preferential rates, potentially Free. Documentation required typically includes a self-certified origin statement for USMCA or a specific origin declaration for CPTPP, depending on the importing country's requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 740919?
HS code 740919 covers 'Other plates, sheets, strip and foil of copper, of a thickness exceeding 0.15 mm, not perforated or not shaped for use in electrical applications'. The Most Favored Nation (MFN) duty rate is 4.80%. However, preferential duty rates are available under various trade agreements. For example, under the Free Trade Agreement between the United States and Australia (AU), the duty is Free. Under the agreement with the European Union (E), the duty is Free. Under the agreement with South Korea (KR), the duty is Free. It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment, as rates can vary significantly.
How is HS code 740919 classified, and what distinguishes it from other copper products?
HS code 740919 falls under Chapter 74 of the Harmonized System, which pertains to copper and articles thereof. Specifically, it is within heading 7409, covering 'Copper plates, sheets, strip and foil'. The subheadings differentiate based on thickness and whether the product is perforated or shaped for electrical applications. 740919 is designated for 'Other' products within this category, meaning it applies to plates, sheets, strip, and foil of copper exceeding 0.15 mm in thickness that are not perforated and not shaped for electrical uses. Products with a thickness of 0.15 mm or less would typically fall under 740921 or 740929 (for foil), and those perforated or shaped for electrical applications would be classified elsewhere, often in Chapter 85.
What documentation is typically required for importing goods under HS code 740919?
When importing goods classified under HS code 740919, standard import documentation is generally required. This includes a commercial invoice detailing the seller, buyer, description of goods, quantity, unit price, and total value. A packing list is also essential, outlining the contents of each package. A bill of lading or air waybill serves as the contract of carriage. Depending on the importing country and the origin of the goods, a certificate of origin may be necessary to claim preferential duty rates under trade agreements. Importers should also be prepared to provide technical specifications or product literature to substantiate the classification if requested by customs authorities.
How is the import duty for HS code 740919 calculated, and can you provide an example?
The import duty for HS code 740919 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For instance, if the MFN duty rate is 4.80%, and an importer brings in 1,000 kilograms of copper plates valued at $5,000 USD (which translates to $5 per kilogram), the customs value would be $5,000. The duty calculation would be: $5,000 (customs value) × 4.80% (duty rate) = $240. In some cases, duties might be specific (per unit) or a combination of ad valorem and specific duties, but for 740919, the primary rate is ad valorem. Always confirm the specific duty calculation method with the importing country's customs authority.
Which common trade agreements offer preferential duty rates for HS code 740919, and how can I verify eligibility?
HS code 740919 benefits from preferential duty rates under numerous trade agreements. Some prominent examples include agreements with Australia (AU), Chile (CL), South Korea (KR), and various countries in the Middle East (e.g., OM, BH) and Southeast Asia (e.g., SG). The 'Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)' notation in some tariff schedules indicates that goods originating from these listed countries or blocs may be eligible for duty-free entry. To verify eligibility, importers must ensure that the copper plates, sheets, strip, or foil meet the Rules of Origin stipulated in the specific trade agreement. This typically involves demonstrating that the goods are wholly obtained in the partner country or have undergone sufficient transformation there. A valid Certificate of Origin issued by the exporting country's competent authority is usually required as proof.