HS 740829 Other
Quick Answer: Copper wire, not insulated, with a cross-sectional dimension exceeding 6 mm, imported under HS 740829 enters the UK at 4.00%, the EU at 4.80%, and the US at rates ranging from 3% to 28% or free for specific trade agreements. This classification, designated "Other" within Chapter 74, specifically captures copper wire that does not meet the criteria for smaller cross-sectional dimensions found in preceding subheadings. Importers should carefully verify the exact cross-sectional dimension of their copper wire to ensure correct classification. According to CustomTariffs data, significant duty rate variations exist across major markets, underscoring the importance of pre-importation duty rate verification for effective cost management.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7408290000 | 4.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7408290000 | 4.80 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7408291000 | 3% | Free (17 programs) | ["kg"] |
| 740829 | — | — | — |
| 7408295000 | 3% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7408.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 740829 cover?
This subheading covers "Other" copper wires that are not insulated, not of a cross-sectional shape other than circular, and not of a cross-sectional dimension exceeding 6 mm. According to the WCO Harmonized System Nomenclature, this category captures copper wires that do not fit into the more specific subheadings within 7408.2, such as those with a circular cross-section or those exceeding the specified dimension. For example, this would include copper wires with a non-circular, but not specifically defined, cross-section that are not insulated and fall within the size parameters. The USITC Harmonized Tariff Schedule (HTS) and EU TARIC also define this as a residual category for copper wire meeting these general criteria.
What falls outside HS 740829?
The following products are excluded from HS 740829: insulated copper wires, which are classified under heading 8544; copper wires of a circular cross-section, which are typically classified under 7408.11 or 7408.19 depending on their cross-sectional dimension; and copper wires with a cross-sectional dimension exceeding 6 mm. For instance, a copper wire used for electrical insulation would be classified elsewhere, as would a solid copper rod with a circular cross-section of 8 mm. The key is that the wire must not be insulated and must have a cross-sectional dimension of 6 mm or less, and if circular, it would fall under 7408.1.
What are common classification mistakes for HS 740829?
A common error is misinterpreting the "Other" designation and classifying insulated copper wire under this subheading, when it should be classified under HS heading 8544. Another mistake involves failing to correctly measure the cross-sectional dimension; if the dimension exceeds 6 mm, it would not fall under this code. Furthermore, confusion can arise with copper wire of a circular cross-section, which has its own dedicated subheadings within 7408.1. Adherence to General Rule of Interpretation (GRI) 3(a) for goods that appear classifiable under two or more headings, and GRI 3(b) for mixtures or composite goods, is crucial to avoid misclassification.
How should importers classify products under HS 740829?
The correct procedure for classifying products under HS 740829 involves a systematic approach. Importers and customs brokers must first determine if the product is indeed copper wire. Then, they must verify that it is not insulated. Next, they should confirm that its cross-sectional dimension does not exceed 6 mm and that it is not of a circular cross-section, as these would lead to classification under other headings. Consulting the official tariff schedule of the importing country, such as the USITC HTS or EU TARIC, and reviewing the explanatory notes for heading 7408 is essential for accurate classification.
How is the duty calculated for products under HS 740829?
A shipment of 1,000 kg of non-insulated, non-circular copper wire with a cross-section of 5 mm, declared at a customs value of $15,000 USD, would attract a US duty of $750.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value. The calculation is: 5.0% × $15,000 USD = $750.00. This rate is published in the USITC Harmonized Tariff Schedule (HTS) under subheading 740829. Note that if the product were sold by weight, a specific duty rate per unit of weight would apply.
Which trade agreements reduce duties for HS 740829?
Several free trade agreements may reduce the applicable duty rate for HS 740829, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries like Vietnam. To claim these preferences, a self-certified origin statement or a specific origin declaration is typically required under USMCA, while a EUR.1 movement certificate or origin declaration is needed for CPTPP, depending on the specific jurisdiction and product.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 740829, covering 'Other' copper wires?
The Most Favored Nation (MFN) duty rate for HS code 740829 is 4.00% ad valorem. Preferential duty rates are available for certain trading partners. For example, goods originating from Australia (AU), the European Union (E), and Singapore (SG) may be eligible for duty-free entry (Free). It is crucial to verify eligibility and provide necessary proof of origin for these preferential rates. Always consult the latest tariff schedule of the importing country for the most up-to-date rates and specific conditions.
How is the import duty for copper wire classified under HS 740829 calculated?
The duty for HS code 740829 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if you import 1,000 kg of copper wire valued at $5,000 USD, and the MFN duty rate is 4.00%, the duty would be calculated as: $5,000 (value) × 4.00% (duty rate) = $200.00. Ensure your customs valuation is accurate and supported by appropriate documentation, such as commercial invoices and bills of lading.
What specific criteria determine if copper wire falls under the 'Other' category (HS 740829)?
HS code 740829 is a residual category for copper wires not specifically classified under other subheadings of 7408. This typically includes copper wires that are not insulated, not enamelled, not anodically treated, or do not meet the specific cross-sectional dimensions or alloy compositions defined in preceding subheadings (e.g., 7408.11 for high conductivity copper wire, or 7408.19 for other copper wire of high conductivity). If your copper wire does not fit into a more specific classification, it will likely be classified under 740829. Consult the Explanatory Notes of the Harmonized System (WCO) for detailed guidance on classification distinctions.
What documentation is typically required for importing goods under HS code 740829?
To import goods classified under HS code 740829, standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the copper wire; a packing list; a bill of lading or air waybill for transportation; and a certificate of origin. If claiming preferential duty rates under trade agreements (e.g., with Australia (AU), the EU (E), or Singapore (SG)), a valid Certificate of Origin or other acceptable proof of origin is mandatory. Importers should also be prepared for potential requests for technical specifications or product samples to verify classification.
Which trade agreements commonly offer preferential duty rates for HS code 740829?
Several trade agreements can provide preferential duty rates for HS code 740829. Based on the provided sample rates, agreements with Australia (AU), the European Union (E), and Singapore (SG) appear to offer duty-free entry (Free). Other agreements, such as those with Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Peru (PE), and the USMCA (formerly NAFTA, often represented by 'P' or 'PA' depending on the specific agreement context), may also offer reduced or free rates. It is essential to consult the specific tariff schedule of the importing country and the relevant Free Trade Agreement (FTA) text to confirm eligibility and the required proof of origin for each partner.