HS 740729 Other
Quick Answer: Bars, rods, and profiles of copper alloys, not elsewhere specified, imported under HS 740729 enter the EU at 4.80% ad valorem, the UK at 0.00% ad valorem, and the US with a range of rates including 3% ad valorem and Free for specific trade agreements. This classification applies to copper alloy articles in these shapes that do not fit into more specific subheadings within Chapter 74. Importers should verify the exact duty rate based on the specific alloy composition and the country of origin, as preferential rates significantly impact landed costs. CustomTariffs aggregates this information, highlighting the importance of precise classification for accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7407290000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7407290000 | 4.80 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 74072916 | 3% | Free (17 programs) | — |
| 7407291610 | — | — | ["kg"] |
| 7407291680 | — | — | ["kg"] |
| 7407294000 | 3% | Free (17 programs) | ["kg"] |
| 7407293400 | 3% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7407.29?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 740729 cover?
This subheading covers bars and rods of copper alloys, other than those specifically enumerated in preceding subheadings of 7407. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category includes products of copper alloyed with other metals, such as brass (copper and zinc) or bronze (copper and tin), that are shaped into solid bars or rods through processes like extrusion, drawing, or rolling. These are distinct from pure copper bars and rods, which fall under other subheadings. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database provide specific examples and definitions for these alloys.
What falls outside HS 740729?
The following products are excluded from HS 740729: bars and rods of pure copper (classified under 7407.10), and bars and rods of copper alloys that are specifically defined by their primary alloying elements, such as brass (often classified under 7407.21) or bronze, if those specific classifications exist at the national level. Additionally, hollow bars and rods, or products that have undergone further working beyond simple shaping, such as threading or drilling, are generally not classified here. For instance, copper alloy wires or tubes would be classified elsewhere.
What are common classification mistakes for HS 740729?
A common error is misinterpreting the "other" designation, leading to the incorrect classification of bars and rods of pure copper or specific copper alloys like brass or bronze under this subheading when more precise classifications exist. This often arises from a failure to consult the specific national tariff schedules, such as the USITC HTS or the UK Trade Tariff, which may have more granular breakdowns. Adherence to General Interpretative Rule 3(c) for mixtures or composite goods, and Rule 1 for the Section and Chapter Notes, is crucial to avoid misclassification.
How should importers classify products under HS 740729?
The correct procedure for classifying products under HS 740729 involves a systematic approach. Importers and customs brokers must first identify the material composition of the bar or rod, determining if it is a copper alloy. Then, they must consult the relevant national tariff schedule (e.g., USITC HTS, EU TARIC, UK Trade Tariff) to ascertain if the specific alloy falls under a more precise subheading within Heading 7407. If it is a copper alloy not specifically listed elsewhere and meets the definition of a bar or rod, then 7407.29 is the appropriate classification.
How is the duty calculated for products under HS 740729?
A shipment of 1,000 kilograms of brass rods (a copper alloy) declared at a customs value of $5,000 USD would attract a US duty of $150. This is calculated using the USITC Harmonized Tariff Schedule's Most Favored Nation (MFN) duty rate of 3.0% ad valorem (3.0% × $5,000 USD = $150 USD). If the rods were priced per kilogram, and the MFN rate was $0.15 per kilogram, the duty would be $150 (0.15 × 1,000 kg).
Which trade agreements reduce duties for HS 740729?
Several free trade agreements may reduce the applicable duty rate for HS 740729, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. The EU's Generalized Scheme of Preferences (GSP) may offer reduced or Free rates for originating goods from certain developing countries. Documentation required typically includes a self-certified origin statement for USMCA or a EUR.1 movement certificate for certain EU preferences.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 740729?
The Most Favored Nation (MFN) duty rate for HS code 740729, which covers 'Other' bars, rods, and profiles of refined copper alloys, is 4.80% ad valorem in the United States. However, preferential duty rates are available under various trade agreements. For instance, under the US-Australia Free Trade Agreement (AU), the rate is Free. It is crucial to consult the specific trade agreement and verify eligibility to claim preferential treatment. Always refer to the latest Harmonized Tariff Schedule of the United States (HTSUS) for definitive rates.
How is the duty calculated for an import under HS 740729?
The duty calculation for HS code 740729 is typically based on an ad valorem rate, meaning a percentage of the declared customs value of the imported goods. For example, if a shipment of copper alloy rods valued at $10,000 is imported into the US with an MFN duty rate of 4.80%, the calculated duty would be $10,000 * 0.0480 = $480.00. Ensure accurate valuation and correct application of the duty rate based on the country of origin and any applicable trade agreements.
What specific criteria define 'Other' under HS code 740729 for refined copper alloys?
HS code 740729 is a residual category for bars, rods, and profiles of refined copper alloys that do not meet the specific descriptions of other subheadings within 7407. This typically includes items made from copper alloys where the alloying element is not specifically listed in preceding subheadings (e.g., copper-nickel alloys, copper-aluminum alloys, etc.), provided they are in the form of bars, rods, or profiles. Classification hinges on the alloy composition and the physical form of the product. If an item fits the general description of a bar, rod, or profile made from a refined copper alloy not otherwise specified, it falls under 740729.
What documentation is typically required for importing goods classified under HS 740729?
For imports under HS code 740729, standard customs documentation is required, including a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim preferential duty rates under trade agreements (e.g., with countries like Australia (AU), Chile (CL), or South Korea (KR)), a Certificate of Origin or a declaration of origin meeting the specific requirements of the relevant Free Trade Agreement (FTA) is mandatory. Importers should also be prepared to provide technical specifications or material composition data if requested by customs to verify the classification.
Which common trade agreements offer preferential duty rates for HS 740729?
Several trade agreements provide preferential duty rates for HS code 740729. For imports into the United States, agreements such as the US-Australia Free Trade Agreement (AU), US-Chile Free Trade Agreement (CL), US-Korea Free Trade Agreement (KR), and others listed with 'Free' or reduced rates (e.g., 'A', 'CL', 'CO', 'KR', 'SG') offer duty exemptions or reductions. The specific rate depends on the country of origin and whether the goods meet the rules of origin stipulated in each agreement. It is essential to consult the HTSUS and the text of the relevant trade agreement to confirm eligibility and required documentation for claiming these benefits.