HS 740721 Of copper alloys
Quick Answer: Bars and rods of copper alloys, specifically those made of copper-zinc base alloys (brass), imported under HS 740721 enter the UK duty-free, the EU at 4.80% ad valorem, and the US at rates varying from free to 17% ad valorem depending on origin. This classification applies to semi-finished products of brass in various shapes, excluding wire. Importers should be aware of the significant duty rate disparities between major trading blocs. CustomTariffs aggregates this data, highlighting the importance of origin-based preferences for US imports.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7407211000 | 0.00 % | — | — |
| 7407219000 | 0.00 % | — | — |
| 7407210000 | — | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7407211000 | 4.80 % | — | — |
| 7407210000 | 4.80 % | — | — |
| 7407219000 | 4.80 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7407211500 | 2.2% | Free (17 programs) | ["kg"] |
| 7407215000 | 2.2% | Free (17 programs) | ["kg"] |
| 7407219000 | 2.2% | Free (17 programs) | ["kg"] |
| 740721 | — | — | — |
| 7407213000 | 2.2% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7407.21?
Imports of Of copper alloys may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 740721 cover?
This subheading covers bars and rods of copper alloys. According to the World Customs Organization's Harmonized System Nomenclature, this includes products that are not otherwise shaped or worked, such as extruded, drawn, or rolled bars and rods. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database further define these as solid products of a uniform cross-section, with or without further working, such as threading or drilling, provided these operations do not alter the essential character of the product. Examples include brass rods and bronze bars.
What falls outside HS 740721?
The following products are excluded from HS 740721: pure copper bars and rods (classified under 7407.10), and copper wire (classified under Chapter 74, typically heading 7408). Also excluded are finished or semi-finished articles made from copper alloy bars or rods, such as screws, bolts, or fabricated structural components, which would be classified according to their specific function or material composition under other headings. For instance, copper alloy screws would fall under heading 7318 if steel, or 7415 if copper.
What are common classification mistakes for HS 740721?
A common error is misclassifying products that are not strictly bars or rods of a uniform cross-section. For example, copper alloy sheets, plates, or strips, even if cut to size, are not covered by this subheading and are typically classified under heading 7409. Another mistake involves confusing alloys with pure copper; the presence of alloying elements, such as zinc in brass or tin in bronze, is critical for classification under 7407.21, as per General Rule of Interpretation 1.
How should importers classify products under HS 740721?
The correct procedure for classifying products under HS 740721 involves first identifying the material composition to confirm it is a copper alloy. Then, the physical form must be assessed to ensure it meets the definition of a bar or rod, meaning a solid product of uniform cross-section. Importers and customs brokers should consult official tariff schedules like the USITC HTS or EU TARIC, paying close attention to explanatory notes and any specific national subdivisions to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 740721?
A shipment of 1,000 kilograms of brass rods, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the declared value. The calculation is: 3.0% × $5,000 USD = $150.00. This rate is published in the USITC Harmonized Tariff Schedule, specifically under HTS subheading 7407.21.0000.
Which trade agreements reduce duties for HS 740721?
Several free trade agreements may reduce the applicable duty rate for HS 740721, including the United States-Mexico-Canada Agreement (USMCA), which can provide duty-free entry for originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries like Vietnam. To claim these preferences, a self-certified origin statement for USMCA or a specific origin declaration for CPTPP is typically required, depending on the jurisdiction and the specific agreement's rules of origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 740721, specifically for 'bars and rods of copper alloys'?
For HS code 740721, which covers bars and rods of copper alloys, the Most Favored Nation (MFN) duty rate in the United States is 0.00%. However, preferential rates under various Free Trade Agreements (FTAs) can apply. For example, under the US-Australia FTA, the rate is also Free. It is crucial to consult the Harmonized Tariff Schedule of the United States (HTSUS) for the most current and specific rates applicable to your country of origin. The HTSUS is maintained by the U.S. International Trade Commission (USITC).
How is the duty for HS code 740721 calculated, and can you provide an example?
Duties are typically calculated on an ad valorem basis (a percentage of the value of the goods) or a specific basis (a set amount per unit of measure). For HS code 740721, the U.S. MFN rate is 0.00% ad valorem. If, hypothetically, a country had a 4.80% ad valorem duty rate and imported bars and rods valued at $10,000, the duty would be calculated as: $10,000 (value) * 4.80% (duty rate) = $480.00. Always verify the specific duty rate and calculation method with the relevant customs authority, such as U.S. Customs and Border Protection (CBP).
What are the key classification criteria for goods to be classified under HS code 740721?
To be classified under HS code 740721, the goods must meet the following criteria: 1. Material: They must be made of copper alloys. This means copper is the principal element by weight, with other elements added to impart specific properties. 2. Form: They must be in the form of bars and rods. Bars are generally solid products of cross-sectional solid shapes, of which the smallest dimension exceeds 6 mm but does not exceed 50 mm, or of which the maximum cross-sectional dimension exceeds 10 mm but does not exceed 150 mm. Rods are generally solid products of cross-sectional solid shapes, of which the smallest dimension does not exceed 6 mm, or of which the maximum cross-sectional dimension does not exceed 150 mm. These definitions are based on WCO Explanatory Notes. 3. Processing: They are typically produced by rolling, extrusion, or drawing.
Which common trade agreements offer preferential duty rates for HS code 740721, and what documentation is needed?
Several trade agreements can provide preferential duty rates for goods classified under HS code 740721. For imports into the U.S., agreements like the US-Australia FTA (AU), US-Chile FTA (CL), and others listed with 'Free' rates in the HTSUS may apply. To claim preferential treatment, importers typically need a 'Certificate of Origin' or a 'Statement of Origin' issued by the exporter, certifying that the goods meet the rules of origin stipulated in the specific trade agreement. This document must be presented to U.S. Customs and Border Protection (CBP) at the time of import. Always check the specific requirements of the relevant trade agreement and CBP regulations.
Are there any specific documentation requirements beyond a commercial invoice and bill of lading for importing goods under HS code 740721?
While a commercial invoice and bill of lading are standard import documents, for HS code 740721, additional documentation might be required depending on the country of origin and destination. For instance, if claiming preferential duty rates under a Free Trade Agreement, a valid Certificate of Origin is mandatory. Some countries may also require a declaration of conformity to certain standards or material composition certificates, especially if the copper alloy contains restricted elements. Importers and customs brokers should consult the specific import regulations of the destination country, such as the EU's TARIC database for European Union imports or the UK Trade Tariff for the United Kingdom, and confirm requirements with U.S. Customs and Border Protection (CBP) for U.S. imports.