HS 732591 Other
Quick Answer: Cast iron or steel articles of the kind described in heading 7325, not elsewhere specified or included, enter the UK at 0.00%, the EU at 2.70% ad valorem, and the US at 2.9% ad valorem (with numerous preferential rates including Free). This residual classification applies to various cast iron or steel articles that do not fit more specific headings within Chapter 73. Importers should exercise caution as this code is broad; precise classification depends on the specific article's form and intended use. CustomTariffs aggregates this data, highlighting the importance of verifying the correct subheadings for each jurisdiction to ensure accurate duty payments and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7325910000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7325910000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7325910000 | 2.9% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7325.91?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 732591 cover?
This subheading covers other cast or otherwise worked articles of iron or steel, not elsewhere specified or included within Heading 7325. According to the WCO Harmonized System Nomenclature, this category is for cast articles of iron or steel that do not fit into more specific subheadings of 7325. For instance, the USITC Harmonized Tariff Schedule (HTS) defines this as "Other" cast articles, implying a residual category for items like cast iron pipe fittings or decorative cast iron elements not otherwise classified.
What falls outside HS 732591?
The following products are excluded from HS 732591: articles of iron or steel which are manufactured by forging, stamping, pressing, or by other cold-working processes, as these fall under different headings. For example, forged steel flanges (HS 7307) or stamped steel sheet metal parts for machinery (often classified under Chapter 84 or 85) are not included. Also excluded are articles of cast iron or cast steel that are specifically covered by other headings, such as cast iron pipes and fittings (HS 7303 and 7307).
What are common classification mistakes for HS 732591?
A common error is misclassifying fabricated or welded steel articles as cast articles under HS 732591. General Rule of Interpretation (GRI) 1 states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. If an article is made by welding or assembling multiple pieces of steel, it is generally not considered "cast" and should be classified elsewhere, often under headings like 7308 for structures or 7326 for other manufactured articles of iron or steel.
How should importers classify products under HS 732591?
The correct procedure for classifying products under HS 732591 involves a thorough examination of the manufacturing process and the final product's characteristics. Importers and customs brokers must first determine if the article is indeed "cast" or "otherwise worked" from iron or steel. If it is, they must then ascertain if it is specifically covered by a more precise subheading within Heading 7325 or another HS chapter. Consulting the official tariff schedule, such as the USITC HTS or EU TARIC, and potentially seeking a binding ruling from customs authorities is recommended.
How is the duty calculated for products under HS 732591?
A cast iron decorative garden bench weighing 50 kg and declared at a customs value of $200 USD would attract a US duty of $10.00. This is calculated using the Most Favored Nation (MFN) duty rate of 2.0% ad valorem applied to the declared value ($200 USD × 0.02 = $4.00) plus a specific duty of $0.02 per kilogram ($0.02/kg × 50 kg = $1.00). The total duty is $5.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 7325910000.
Which trade agreements reduce duties for HS 732591?
Several free trade agreements may reduce the applicable duty rate for HS 732591, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the US duty-free. To claim this preference, a valid Certificate of Origin or a self-certified origin statement meeting USMCA requirements is necessary. Additionally, goods from certain developing countries may benefit from the Generalized System of Preferences (GSP), potentially offering reduced or free entry, requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 732591, specifically for "Other cast articles of iron or steel, not elsewhere specified"?
The Most Favored Nation (MFN) duty rate for HS code 732591 is 2.70% ad valorem. However, preferential duty rates are available under various trade agreements. For example, goods originating from Australia (AU), South Korea (KR), or Singapore (SG) may enter duty-free. It is crucial to verify the specific origin of the goods and the applicable trade agreement to determine the correct duty rate. Always consult the latest USITC Harmonized Tariff Schedule for definitive rates.
How is the import duty calculated for HS 732591, and can you provide an example?
The duty for HS code 732591 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if you import a shipment of cast iron manhole covers valued at $10,000 and the MFN duty rate is 2.70%, the calculated duty would be $10,000 * 0.0270 = $270.00. If a specific rate in addition to ad valorem applies, or if the goods are subject to a quantity-based duty, the calculation would be adjusted accordingly. Always refer to the official tariff schedule for the precise duty calculation method.
What are the classification criteria for goods falling under HS code 732591?
HS code 732591 covers 'Other cast articles of iron or steel, not elsewhere specified or included.' This means the article must be made of iron or steel, it must have been produced by casting (pouring molten metal into a mold), and it must not be classifiable under any other more specific heading within Chapter 73 of the Harmonized System. Examples include cast iron pipes and fittings not specifically listed elsewhere, decorative cast iron items, and certain cast machine parts that do not have a more specific classification. Proper classification requires careful examination of the article's material, manufacturing process, and function, referencing the WCO Explanatory Notes and the specific national tariff schedule.
What documentation is typically required for importing goods classified under HS 732591?
Standard import documentation for HS code 732591 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the country of origin and any preferential claims being made, a Certificate of Origin may be required to prove the goods' eligibility for reduced or free trade agreement rates. Importers should also be prepared to provide technical specifications or product literature if requested by customs authorities to verify classification. Always check the specific import requirements of the destination country.
Which common trade agreements offer preferential duty rates for HS code 732591, and what are some examples of these rates?
Several trade agreements provide preferential duty rates for goods classified under HS code 732591. For example, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada (CA) and Mexico (MX) may benefit from duty-free entry. Similarly, agreements with countries like South Korea (KR) and Singapore (SG) often grant duty-free access. The provided sample rates indicate potential free entry (Free) for specific partner countries (e.g., AU, KR, SG). Importers must ensure their goods meet the rules of origin stipulated in the relevant trade agreement to claim these preferential rates.