HS 731589 Other
Quick Answer: Other chains and parts thereof, of iron or steel, imported under HS 731589 enter the UK at 0.00%, the EU at 2.70% ad valorem, and the US with rates varying from 1.5% to 10% ad valorem, with certain preferential rates offering duty-free entry. This residual classification applies to iron or steel chains and their parts not specifically covered by preceding headings within Chapter 73. Importers should carefully verify the specific product's characteristics against the more detailed subheadings to ensure correct classification and avoid potential duty discrepancies. CustomTariffs aggregates this data for compliance professionals.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7315890000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7315890000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7315891000 | 1.5% | Free (18 programs) | ["kg"] |
| 731589 | — | — | — |
| 7315893000 | Free | — | ["kg"] |
| 7315895000 | 3.9% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7315.89?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 731589 cover?
This subheading covers "Other" chains and parts of chains of iron or steel, not specifically enumerated in preceding subheadings of heading 7315. According to the WCO Harmonized System Explanatory Notes and official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this category is a residual one for chains and their parts that do not fit into more specific classifications, such as welded or unwelded link chains, or those specifically designed for particular uses like lifting or traction. It captures a diverse range of iron or steel chains and their components.
What falls outside HS 731589?
The following products are excluded from HS 731589: chains and parts of chains of precious metal or metal clad with precious metal (Chapter 71), and chains specifically designed for particular applications that are classified elsewhere. For instance, roller chains for bicycles are typically classified under HS 8310.90, and certain types of specialized industrial chains might fall under other headings depending on their primary function and material composition, such as those used in machinery. This subheading is strictly for general-purpose iron or steel chains and their parts not otherwise specified.
What are common classification mistakes for HS 731589?
A common error is misclassifying specialized chains or chain parts that have a distinct primary use, thereby incorrectly assigning them to this residual "Other" category. For example, a chain specifically designed for a particular type of machinery might be mistakenly classified here instead of under a heading related to that machinery. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to ensure that the most specific heading and subheading are applied before resorting to residual provisions like 731589.
How should importers classify products under HS 731589?
The correct procedure for classifying products under HS 731589 involves a thorough examination of the product's characteristics and intended use. Importers and customs brokers must first consult the WCO HS Nomenclature and the specific tariff schedule of the importing country (e.g., USITC HTS, EU TARIC, UK Trade Tariff). If the chain or chain part is made of iron or steel and does not meet the criteria for more specific subheadings within heading 7315, or other relevant headings, then HS 731589 is the appropriate classification. Verification against product literature and technical specifications is recommended.
How is the duty calculated for products under HS 731589?
A shipment of 500 kilograms of general-purpose iron or steel link chain, declared at a customs value of $2,500 USD, would attract a US duty of $125.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($2,500 USD × 0.05 = $125.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 7315.89.9000, which is the specific US classification for "Other" chains and parts thereof.
Which trade agreements reduce duties for HS 731589?
Several free trade agreements may reduce the applicable duty rate for HS 731589, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, chains and parts of chains originating from Canada or Mexico may be eligible for a duty rate of Free, provided the applicable rules of origin are met. To claim this preference, a compliant origin declaration or certificate is typically required, depending on the specific requirements of US Customs and Border Protection. Other agreements may offer similar preferential treatment for goods from specific countries.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 731589?
HS code 731589, which covers 'Other' chain, of iron or steel, has varying Most Favored Nation (MFN) duty rates depending on the importing country. For example, the U.S. applies a 2.70% ad valorem duty. The UK's duty rate is 0.00% (Free). The EU's TARIC system may show specific rates, often around 1.5% ad valorem for non-preferential imports. Always consult the specific tariff schedule of the destination country for the most current and accurate rates.
How is the duty calculated for HS code 731589, and can you provide an example?
Duty calculation for HS code 731589 is typically based on an ad valorem rate, meaning a percentage of the declared customs value of the goods. For instance, if a shipment of 'other' chains classified under 731589 has a customs value of $10,000 and the MFN duty rate is 2.70% (as in the U.S.), the import duty would be calculated as: $10,000 (value) × 0.0270 (duty rate) = $270.00. Some countries may also apply specific duties based on weight or other units, so it's crucial to check the applicable tariff schedule.
What are the key criteria for classifying goods under HS code 731589 ('Other')?
HS code 731589 is a residual category used when chains of iron or steel do not meet the specific criteria for other subheadings within heading 7315. Heading 7315 covers 'Anchors, grapnels and parts thereof, of iron or steel; chains and parts thereof, of iron or steel.' Subheadings typically differentiate based on type (e.g., welded, non-welded, roller chains, conveyor chains) and material. If a chain is made of iron or steel and does not fit into a more specific classification (like 7315.11 for roller chain or 7315.12 for other simplex roller chain), it falls under 7315.89. Classification relies on the precise description and construction of the chain, often requiring technical specifications or product literature.
Which trade agreements commonly provide preferential duty rates for HS code 731589?
Preferential duty rates for HS code 731589 are often available under various Free Trade Agreements (FTAs) and preferential trade schemes. For example, the U.S. offers Free (0.00%) duty rates under agreements with countries like Australia (AU), Bahrain (BH), Canada (CA - USMCA), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), South Korea (KR), Mexico (MX - USMCA), Morocco (MA), Oman (OM), Peru (PE), Singapore (SG), and others designated by 'P' (Panama) or 'S' (Central America). The UK also offers Free (0.00%) rates to many countries under its own trade agreements. Importers must verify the origin of the goods and ensure they meet the rules of origin stipulated in the relevant trade agreement to claim preferential treatment.
What documentation is typically required for importing goods classified under HS code 731589?
Standard import documentation for goods under HS code 731589 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the specific nature of the 'other' chain, additional documents may be required. This could include a certificate of origin to claim preferential duty rates under trade agreements, or specific product certifications if the chain is intended for a particular application (e.g., safety equipment). It is advisable for importers and customs brokers to consult the customs authority of the destination country or a licensed customs broker for a comprehensive list of required documentation.