HS 730792 Threaded elbows, bends and sleeves
Quick Answer: Threaded elbows, bends, and sleeves imported under HS 730792 enter the UK duty-free, the EU at 3.70% ad valorem, and the US at rates ranging from Free to 45% ad valorem. This classification specifically covers fittings made of iron or steel, characterized by threaded connections, used to join pipes or change the direction of fluid flow. Importers should be aware of potential anti-dumping duties in the US for certain origins. According to CustomTariffs data, precise duty rates can vary based on the specific material composition and country of origin, necessitating careful verification for accurate customs declarations.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307929010 | 0.00 % | — | — |
| 7307929090 | 0.00 % | — | — |
| 7307920000 | — | — | — |
| 7307921000 | 0.00 % | — | — |
| 7307929000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307920000 | — | — | — |
| 7307929000 | 3.70 % | — | — |
| 7307929090 | 3.70 % | — | — |
| 7307921000 | 0.00 % | — | — |
| 7307929010 | 3.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 73079230 | Free | — | — |
| 7307923030 | — | — | ["kg"] |
| 7307929000 | 6.2% | Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) 3.1% (1 programs) | ["kg"] |
| 730792 | — | — | — |
| 7307923010 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7307.92?
Imports of Threaded elbows, bends and sleeves may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 730792 cover?
This subheading covers threaded elbows, bends, and sleeves made of iron or steel, specifically those not specified in the preceding subheadings of heading 7307. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, these fittings are designed to connect pipes or tubes through threaded engagement, facilitating changes in direction (bends, elbows) or joining pipes (sleeves). They are typically manufactured from cast iron or steel, with threads conforming to recognized standards.
What falls outside HS 730792?
The following products are excluded from HS 730792: unthreaded fittings, fittings made from materials other than iron or steel (such as plastics or copper), and specialized fittings like flanges or couplings that are classified under different subheadings within heading 7307 or other headings entirely. For instance, welded elbows or compression fittings would not fall under this subheading, nor would pipe hangers or supports, which are typically classified in Chapter 73 or other relevant chapters based on their material and function.
What are common classification mistakes for HS 730792?
A common error is misinterpreting the "threaded" requirement. Fittings that are designed for welding, soldering, or compression joining, even if they resemble threaded fittings in shape, should not be classified under HS 730792. Additionally, confusion can arise with other pipe-connecting items like nipples or unions, which may have their own specific classifications. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1, which emphasizes the Section and Chapter Notes and the terms of the headings and subheadings, is crucial to avoid misclassification.
How should importers classify products under HS 730792?
The correct procedure for classifying products under HS 730792 involves a systematic approach. Importers and customs brokers should first identify the material composition (iron or steel), then determine the method of connection (threaded), and finally ascertain the specific function (elbow, bend, or sleeve). Consulting the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing the Explanatory Notes for heading 7307 is essential. If uncertainty persists, seeking a binding ruling from the customs authority is recommended.
How is the duty calculated for products under HS 730792?
A shipment of 100 galvanized steel threaded elbows, each weighing 0.5 kg, with a total declared customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value. The calculation is: 5.0% × $500 USD = $25.00. This rate is published in the USITC Harmonized Tariff Schedule under HTS code 7307.92.0000.
Which trade agreements reduce duties for HS 730792?
Several free trade agreements may reduce the applicable duty rate for HS 730792, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating elbows, bends, and sleeves from Canada and Mexico can enter the United States duty-free. To claim this preferential rate, a valid USMCA Certificate of Origin is required. Additionally, the Generalized System of Preferences (GSP) may offer reduced or duty-free entry for originating goods from certain developing countries, typically requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 730792 (threaded elbows, bends, and sleeves) into the United States?
For imports into the United States, Harmonized Tariff Schedule (HTS) code 730792 falls under 'Other tubes and pipes of iron or steel, fittings'. The general Most Favored Nation (MFN) duty rate is 3.70% ad valorem. However, preferential rates may apply under various trade agreements. For instance, goods originating from Canada or Mexico under the United States-Mexico-Canada Agreement (USMCA) may have a 0.00% duty rate, provided they meet the rules of origin. Always consult the latest USITC HTSUS for definitive rates and specific origin requirements.
How is the import duty for HS code 730792 calculated for a shipment to the UK?
In the United Kingdom, HS code 730792 is classified under 'Other tubes and pipes of iron or steel, fittings'. The standard import duty rate is 3.70% ad valorem. For example, if you import a shipment of threaded steel elbows valued at £10,000, the duty would be calculated as 3.70% of £10,000, resulting in a duty of £370. It is crucial to verify the applicable duty rate on the UK Trade Tariff, as specific origin rules or trade agreements (e.g., the UK's Free Trade Agreement with the EU) could alter this rate to 0.00% or another figure.
What are the key classification criteria for items under HS code 730792?
HS code 730792 specifically covers 'threaded elbows, bends and sleeves' made of iron or steel. The primary classification criteria are the material (iron or steel), the function (fittings for tubes or pipes), and the method of connection (threaded). Items that are welded, flanged, or otherwise joined by different means would typically fall under different subheadings within 7307. For example, a steel elbow that is designed to be welded would not be classified under 7307.92 but likely under 7307.93.
What documentation is typically required for clearing imports classified under HS code 730792?
For imports classified under HS code 730792, standard customs documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the country of import and any preferential trade agreements claimed, a Certificate of Origin may be necessary to substantiate eligibility for reduced or zero duty rates. Importers should also be prepared to provide technical specifications or product literature if customs authorities require verification of the 'threaded' nature of the fittings.
Are there common trade agreements that provide preferential duty rates for HS code 730792?
Yes, several trade agreements can affect the duty rates for HS code 730792. For imports into the United States, the USMCA (United States-Mexico-Canada Agreement) often provides a 0.00% duty rate for qualifying goods from Canada and Mexico. The European Union's TARIC system details preferential rates for goods originating from countries with which the EU has trade agreements, potentially reducing duties from the standard rate. Similarly, the UK Trade Tariff outlines preferential rates under agreements like the UK-EU Trade and Cooperation Agreement. To benefit from these, importers must ensure the goods meet the relevant rules of origin and possess the required proof of origin documentation.