HS 730722 Threaded elbows, bends and sleeves
Quick Answer: Threaded elbows, bends, and sleeves imported under HS 730722 enter the UK duty-free, the EU at 3.70% ad valorem, and the US at 45% ad valorem under the MFN rate. This classification covers fittings made of stainless steel, specifically those with threaded connections used to join pipes or tubes at angles or to extend them. These items are crucial for plumbing and industrial fluid transfer systems. Importers should be aware of the significant duty rate disparity for the US market, which may necessitate careful sourcing and cost analysis. According to CustomTariffs data, variations in specific subheadings within these jurisdictions can lead to different rates, underscoring the importance of precise classification.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307229000 | 0.00 % | — | — |
| 7307229090 | 0.00 % | — | — |
| 7307220000 | — | — | — |
| 7307221000 | 0.00 % | — | — |
| 7307229010 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307220000 | — | — | — |
| 7307229000 | 3.70 % | — | — |
| 7307229090 | 3.70 % | — | — |
| 7307221000 | 0.00 % | — | — |
| 7307229010 | 3.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307221000 | Free | — | ["kg"] |
| 730722 | — | — | — |
| 7307225000 | 6.2% | Free (18 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7307.22?
Imports of Threaded elbows, bends and sleeves may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 730722 cover?
This subheading covers threaded elbows, bends, and sleeves specifically made from stainless steel, as per the World Customs Organization's Harmonized System Nomenclature. These fittings are designed to connect pipes or tubes in fluid or gas systems, with their threaded nature facilitating secure, mechanical joining. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that this classification applies to items manufactured from stainless steel, distinguishing them from fittings made of other materials or those with different connection methods.
What falls outside HS 730722?
The following products are excluded from HS 730722: fittings made from other metals such as carbon steel (classified under 7307.11 or 7307.91), aluminum, or copper; non-threaded fittings like welded or flanged types; and components that are not specifically elbows, bends, or sleeves, such as couplings or reducers that do not alter direction. For instance, stainless steel pipe nipples, which are typically threaded but are essentially short lengths of pipe, are generally classified under a different heading, often 7307.99.
What are common classification mistakes for HS 730722?
A common error is misidentifying the material composition, leading to the classification of stainless steel fittings under headings for carbon steel or other metals. Another mistake involves confusing threaded elbows and bends with other types of pipe fittings, such as straight couplings or reducers, which have distinct HS codes. Adherence to General Rule of Interpretation (GRI) 1 and GRI 3(b) is crucial, ensuring that the primary function and material of the item dictate its classification, especially when components might suggest alternative headings.
How should importers classify products under HS 730722?
The correct procedure for classifying products under HS 730722 involves a meticulous examination of the item's material, form, and function. Importers and customs brokers must confirm that the fitting is indeed made of stainless steel and that it serves as a threaded elbow, bend, or sleeve. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing explanatory notes from the WCO are essential steps to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 730722?
A shipment of 100 stainless steel threaded elbows, each weighing 0.5 kg, for a total weight of 50 kg, declared at a customs value of $500 USD, would attract a US duty of $20.00. This is calculated using the Most Favored Nation (MFN) rate of 3.5% ad valorem, applied to the declared value: 3.5% of $500 USD = $17.50, plus a specific duty of $0.04 per kg, totaling $2.00 (0.04 × 50 kg). The total duty is $19.50. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 730722?
Several free trade agreements may reduce the applicable duty rate for HS 730722, including the United States-Mexico-Canada Agreement (USMCA), which can lead to duty-free entry for qualifying goods originating from Canada or Mexico. Additionally, goods from countries benefiting from the Generalized System of Preferences (GSP) may also receive reduced or duty-free treatment. To claim these preferences, importers typically need to provide a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific requirements of the importing jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 7307.22, covering threaded elbows, bends, and sleeves of stainless steel?
The duty rates for HS code 7307.22 vary by country. For instance, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) duty rate is 3.70% ad valorem. Under the EU's TARIC system, this code often carries a rate of 0.00% ad valorem, though specific origin rules and potential anti-dumping duties may apply. The UK Trade Tariff also typically shows a 0.00% duty rate for goods originating from most countries, but importers must verify the specific origin and any applicable trade agreements. Always consult the latest official tariff schedules for the importing country to confirm the precise duty applicable to your shipment.
What specific criteria determine if a pipe fitting falls under HS code 7307.22?
HS code 7307.22 specifically covers 'Threaded elbows, bends and sleeves' of stainless steel. Key classification criteria include: 1. Material: The fitting must be made of stainless steel. 2. Function: It must be a pipe or tubing fitting, used to join, support, or regulate the flow of pipes or tubing. 3. Type: It must be an elbow, bend, or sleeve. 4. Connection Method: The fitting must have threaded connections. Fittings of other materials (e.g., cast iron, other steel) or with different connection types (e.g., welded, flanged) would be classified under different subheadings within Chapter 73.
How is the import duty for HS 7307.22 calculated, and can you provide an example?
The duty for HS code 7307.22 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate in the US is 3.70% and you import threaded stainless steel elbows valued at $10,000, the duty would be calculated as: $10,000 (Customs Value) × 3.70% (Duty Rate) = $370.00. Some countries may also apply specific duties based on weight or quantity, or a combination of ad valorem and specific duties. Always refer to the specific tariff schedule for the calculation method.
What documentation is typically required for importing goods classified under HS code 7307.22?
Standard import documentation for HS code 7307.22 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to benefit from preferential duty rates under trade agreements, a certificate of origin is usually required, demonstrating that the goods meet the rules of origin for that agreement. Depending on the importing country and the specific product, additional documentation such as material test certificates (e.g., specifying the grade of stainless steel) might be requested by customs authorities to verify compliance with specifications.
Do trade agreements like USMCA or EU Free Trade Agreements affect the duty rates for HS code 7307.22?
Yes, trade agreements can significantly impact duty rates for HS code 7307.22. For example, under the United States-Mexico-Canada Agreement (USMCA), goods of North American origin may qualify for duty-free treatment. Similarly, the EU has numerous Free Trade Agreements (FTAs) with partner countries, which often provide for reduced or eliminated tariffs on goods like stainless steel pipe fittings if they meet the relevant rules of origin. Importers must obtain a valid certificate of origin from the exporter and ensure the goods comply with the specific origin criteria of the applicable trade agreement to claim preferential treatment. Without proper documentation or if origin criteria are not met, the standard MFN duty rate will apply.