HS 730719 Other
Quick Answer: Iron or steel pipe or tube fittings imported under HS 730719 enter the UK duty-free, the EU at 3.70% ad valorem, and the US at 5.6% ad valorem under the Most Favored Nation (MFN) rate. This classification, "Other," applies to cast iron or alloy cast iron pipe or tube fittings not specified elsewhere in Chapter 73. Importers should be aware that the US offers preferential duty rates for certain trading partners, potentially reducing the 5.6% MFN rate. CustomTariffs aggregates this data, highlighting the need for careful verification of origin and applicable trade agreements to ensure accurate duty payments.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307191000 | 0.00 % | — | — |
| 7307191013 | 0.00 % | — | — |
| 7307191015 | 0.00 % | — | — |
| 7307191020 | 0.00 % | — | — |
| 7307191030 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307190000 | 3.70 % | — | — |
| 7307191003 | 3.70 % | — | — |
| 7307191010 | 3.70 % | — | — |
| 7307191015 | 3.70 % | — | — |
| 7307191030 | 3.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7307199030 | — | — | ["kg"] |
| 73071930 | 5.6% | Free (17 programs) | — |
| 7307193060 | — | — | ["kg"] |
| 7307193085 | — | — | ["kg"] |
| 7307199040 | — | — | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7307.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 730719 cover?
This subheading covers other fittings and parts of iron or steel, not specified or included elsewhere within heading 7307. According to the World Customs Organization's Harmonized System Nomenclature, this category encompasses a wide array of connecting pieces for pipes, tubes, and hoses made of iron or steel, provided they do not fall under more specific subheadings like those for cast iron or malleable iron fittings. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC system generally align with this broad definition, capturing items such as steel pipe couplings, flanges, elbows, and tees that are not explicitly classified under 7307.11 (cast iron) or 7307.19.10 (malleable iron).
What falls outside HS 730719?
The following products are excluded from HS 730719: fittings and parts of cast iron (classified under 7307.11), malleable iron fittings (classified under 7307.19.10 in some jurisdictions like the US), and any fittings or parts made from materials other than iron or steel. Additionally, complete pipe or tube assemblies, or items that are primarily functional as valves or taps, even if they incorporate iron or steel fittings, would likely be classified under different headings. For instance, a steel valve with integrated flanges would be classified as a valve, not as a fitting under 7307.
What are common classification mistakes for HS 730719?
A common error is misinterpreting the distinction between cast iron, malleable iron, and other types of iron or steel fittings. General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial here. Importers may incorrectly classify a malleable iron fitting under 730719 if they overlook the specific exclusion for malleable iron, which often has its own distinct subheading. Another mistake involves classifying components that are integral parts of machinery or equipment under this heading, rather than with the machinery itself.
How should importers classify products under HS 730719?
The correct procedure for classifying products under HS 730719 involves a systematic approach. First, determine the material composition of the fitting, confirming it is made of iron or steel. Next, ascertain if it is cast iron or malleable iron; if so, it will be classified under a more specific subheading (e.g., 7307.11 or 7307.19.10). If it is neither cast nor malleable iron, and it serves as a fitting for pipes, tubes, or hoses, then 730719 is likely appropriate. Consulting the Explanatory Notes to the Harmonized System and the specific tariff schedules of the importing country, such as the USITC HTS or EU TARIC, is essential for definitive classification.
How is the duty calculated for products under HS 730719?
A shipment of 1,000 steel pipe nipples, each weighing 0.5 kg, with a declared customs value of $500 USD, would attract a US duty. Assuming a Most Favored Nation (MFN) duty rate of 2.5% ad valorem for this specific type of fitting under the USITC Harmonized Tariff Schedule, the duty would be $12.50 USD (2.5% × $500 USD). This calculation is based on the ad valorem system, where the duty is a percentage of the declared customs value of the goods.
Which trade agreements reduce duties for HS 730719?
Several free trade agreements may reduce the applicable duty rate for HS 730719, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods may be eligible for Free entry. For example, steel fittings originating from Canada or Mexico would benefit from this preferential rate. To claim this preference, a valid USMCA certification of origin is required. Additionally, goods from certain developing countries may benefit from the Generalized System of Preferences (GSP), potentially resulting in reduced or Free duty rates, requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 730719, and how do preferential trade agreements impact them?
HS code 730719 covers 'Other' cast or forged tube or pipe fittings of iron or steel. The Most Favored Nation (MFN) duty rate in the United States is typically 3.70% ad valorem. However, preferential rates can significantly reduce or eliminate duties. For example, under the US-Australia Free Trade Agreement (AU), the duty rate is Free. Importers should consult the relevant trade agreement schedules, such as those available on the US International Trade Commission (USITC) website, to determine applicable preferential rates based on the country of origin. Other agreements like those with Canada (CA) or Mexico (MX) may also offer preferential treatment.
How is the import duty for HS code 730719 calculated, and can you provide an example?
The import duty for HS code 730719 is generally calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if the MFN duty rate is 3.70% and you are importing fittings valued at $10,000, the duty would be calculated as: $10,000 (value) × 0.0370 (duty rate) = $370.00. If the duty were a specific rate (e.g., per kilogram), the calculation would be rate × quantity. Always refer to the specific tariff schedule of the importing country for the precise duty calculation method and rate applicable to your shipment.
What are the classification criteria to ensure goods fall under HS code 730719?
HS code 730719 is a residual category for tube or pipe fittings of iron or steel that are cast or forged but do not meet the criteria for other specific subheadings within 7307. This includes fittings such as elbows, tees, and couplings made from cast or forged iron or steel, which are not otherwise specified. To ensure correct classification, verify that the fittings are indeed made of iron or steel, that they are designed for tubes or pipes, and that they are manufactured by casting or forging. If the fittings are welded or made from sheet metal, they would likely fall under different HS codes. Consulting the Explanatory Notes to the Harmonized System (WCO) can provide further clarification on the scope of this heading.
What documentation is typically required for importing goods classified under HS code 730719?
Standard documentation for importing goods under HS code 730719 generally includes a commercial invoice detailing the value, quantity, and description of the fittings; a packing list; and a bill of lading or air waybill. Depending on the country of origin and any claimed preferential duty rates, a Certificate of Origin may be required. For example, if claiming duty-free entry under a Free Trade Agreement, specific origin documentation mandated by that agreement must be provided. Importers should also be prepared for potential requests for technical specifications or product brochures to verify classification. Always check the specific import requirements of the destination country's customs authority.
Which common trade agreements offer preferential duty rates for HS code 730719, and what are their typical benefits?
Several trade agreements offer preferential duty rates for HS code 730719. For instance, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada or Mexico may qualify for duty-free entry. Similarly, agreements with countries like Australia (AU), South Korea (KR), and Singapore (SG) often provide for reduced or eliminated duties. The benefit is a reduction or elimination of the standard ad valorem duty, leading to lower overall import costs. Importers must ensure their goods meet the specific rules of origin for the relevant trade agreement and possess the necessary documentation, such as a Certificate of Origin, to claim these benefits. Checking resources like the EU TARIC database or the UK Trade Tariff can provide details on preferential rates applicable to those regions.