HS 730619 Other
Quick Answer: Other welded tubes and pipes of iron or steel, not of circular cross-section, imported under HS 730619 enter the UK at 0.00%, the EU at 0.00%, and the US with rates ranging from Free to 10% ad valorem. This residual classification applies to welded tubes and pipes of iron or steel that do not fit into more specific subheadings within Chapter 73, particularly those with non-circular cross-sections and not specifically covered by other 7306 categories. Importers should exercise caution, as the "Other" designation necessitates careful review of the product's exact specifications to ensure it is correctly classified and to avoid potential discrepancies. CustomTariffs aggregates this data, highlighting the varying tariff treatments across major markets.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7306190000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7306190000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 730619 | — | — | — |
| 7306191010 | — | — | ["kg"] |
| 73061951 | Free | — | — |
| 7306195150 | — | — | ["kg"] |
| 73061910 | Free | — | — |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 730619 cover?
This subheading covers "other" welded tubes and pipes of iron or steel, not made of circular cross-section, and not specifically covered by preceding subheadings within heading 7306. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this category encompasses welded tubes and pipes with non-circular cross-sections, such as square, rectangular, or oval, intended for various industrial and construction applications, provided they are not further specified elsewhere.
What falls outside HS 730619?
The following products are excluded from HS 730619: seamless tubes and pipes of iron or steel (heading 7304), and tubes and pipes of cast iron (heading 7303). Additionally, welded tubes and pipes of circular cross-section, even if of iron or steel, are classified under other subheadings of 7306 based on their diameter and whether they are line pipe or not. For instance, galvanized or otherwise coated tubes and pipes may also fall under different classifications depending on the specific treatment and end-use.
What are common classification mistakes for HS 730619?
A common error is misclassifying welded tubes and pipes of circular cross-section under this "other" non-circular subheading. General Rule of Interpretation (GRI) 1 states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. Importers may also incorrectly classify products based solely on material composition without considering the specific manufacturing process (welded vs. seamless) or the cross-sectional shape, leading to misapplication of the tariff schedule.
How should importers classify products under HS 730619?
The correct procedure for classifying products under HS 730619 involves a detailed examination of the product's characteristics. Importers and customs brokers must first determine if the product is a tube or pipe of iron or steel. Subsequently, they must ascertain if it is welded and if its cross-section is non-circular. If these criteria are met and the product is not specifically covered by a more precise subheading within 7306 or another heading, then 730619 is the appropriate classification.
How is the duty calculated for products under HS 730619?
A shipment of 10,000 kg of rectangular steel tubing, declared at a customs value of $15,000 USD, would attract a US duty of $1,500.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared customs value ($15,000 USD × 10% = $1,500.00). This calculation is based on the duty rate published in the USITC Harmonized Tariff Schedule for HS code 73061900.
Which trade agreements reduce duties for HS 730619?
Several free trade agreements may reduce the applicable duty rate for HS 730619, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating tubes and pipes from Canada and Mexico can be admitted duty-free. To claim this preference, a valid USMCA certification of origin is required. Additionally, the Generalized System of Preferences (GSP) may offer reduced or duty-free entry for qualifying products from certain developing countries, typically requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical duty rates for HS code 730619, and how can I determine the most favorable rate?
HS code 730619, which covers 'Other tubes and pipes of iron or steel, seamless or welded, of circular cross-section, of external diameter not exceeding 406.4 mm', has varying duty rates depending on the importing country and any applicable trade agreements. For instance, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) rate is often 0.00%. However, preferential rates under Free Trade Agreements (FTAs) may also apply. To determine the most favorable rate, importers and brokers should consult the specific tariff schedule of the destination country, such as the USITC's HTS, the EU's TARIC database, or the UK's Trade Tariff, and check for eligibility under relevant FTAs. Always verify the origin of the goods to claim preferential treatment.
What specific criteria distinguish products classified under HS 730619 from other related HS codes for tubes and pipes?
HS code 730619 is a residual category for tubes and pipes of iron or steel that are not specifically covered elsewhere in heading 7306. Key classification criteria include: being of circular cross-section, having an external diameter not exceeding 406.4 mm, and being made of iron or steel. Crucially, it applies to products that do not meet the specific descriptions of other subheadings within 7306, such as those for oil and gas pipelines (7306.11) or those with specific surface treatments or manufacturing processes. Importers must carefully review the Explanatory Notes to the Harmonized System and the national tariff schedules to ensure the product's characteristics align with the residual nature of 730619 and not a more specific subheading.
What documentation is typically required for importing goods classified under HS 730619?
Standard documentation for importing goods under HS 730619 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, a Certificate of Origin may be required, especially if preferential duty rates are being claimed under a Free Trade Agreement. Some countries may also require specific safety or quality certifications, or import permits, particularly if the tubes and pipes are intended for critical infrastructure or specific industrial applications. It is advisable to consult the customs authority of the importing country for a comprehensive list of required documents.
How is the duty calculated for HS code 730619, and can you provide an example?
The duty calculation for HS code 730619 depends on the specific duty rate applied by the importing country. Duties can be ad valorem (a percentage of the value of the goods) or specific (a fixed amount per unit of quantity), or a combination. For example, if a country applies a 10% ad valorem duty rate on HS 730619, and the declared customs value of a shipment of these tubes is $50,000 USD, the duty would be calculated as: 10% of $50,000 USD = $5,000 USD. If the duty were specific, for instance, $0.50 per kilogram, and the shipment weighed 10,000 kg, the duty would be $0.50/kg * 10,000 kg = $5,000 USD. Always confirm the applicable duty basis (ad valorem, specific, or compound) and rate from the official tariff schedule.
Which major trade agreements might offer preferential duty rates for goods classified under HS 730619, and how can importers verify eligibility?
Several major trade agreements could potentially offer preferential duty rates for goods classified under HS 730619, depending on the origin of the goods and the importing country. Examples include the United States-Mexico-Canada Agreement (USMCA), the European Union's Free Trade Agreements with various countries, and the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP). To verify eligibility, importers must ensure that the goods meet the rules of origin stipulated in the specific trade agreement. This typically involves obtaining a Certificate of Origin from the exporter and confirming that the goods have undergone sufficient transformation or meet regional value content requirements. Consulting the text of the relevant trade agreement and the customs authorities of the importing country is crucial for accurate eligibility assessment.