HS 730539 Other
Quick Answer: Tubes and pipes of iron or steel, other than of circular cross-section, imported under HS 7305.39 enter the UK and EU duty-free, while the US applies rates of Free, 5.5%, or 10% depending on specific product characteristics. This residual "Other" classification within Chapter 73 covers hollow profiles of iron or steel that are not circular and are not welded or made from iron or steel wire. Importers should carefully review the specific product's material composition, manufacturing method, and intended use to determine the correct sub-classification and applicable duty rate in the US. CustomTariffs aggregates this information, highlighting the importance of precise classification for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7305390000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7305390000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7305391000 | Free | — | ["kg"] |
| 730539 | — | — | — |
| 7305395000 | Free | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 730539 cover?
This subheading covers other tubes and pipes of iron or steel, not of circular cross-section, which are not further specified or included in other subheadings of heading 7305. According to the WCO Harmonized System Nomenclature, this residual category applies to welded or seamless tubes and pipes of iron or steel that do not meet the criteria for circular cross-sections or other specific descriptions within heading 7305. For instance, USITC HTS 7305.39.0000 defines this as "Other" tubes and pipes of iron or steel, not of circular cross-section, welded.
What falls outside HS 730539?
The following products are excluded from HS 730539: tubes and pipes of circular cross-section (classified under 7303, 7304, or 7306 depending on construction and material), tubes and pipes of iron or steel of circular cross-section and with internal or external grooves, fluting, ribbing, etc. (7305.11-7305.19), and tubes and pipes of iron or steel of circular cross-section and with other external or internal profiling (7305.20). For example, seamless steel pipes of circular cross-section for oil and gas pipelines are classified under 7305.11, not 7305.39.
What are common classification mistakes for HS 730539?
A common error is misinterpreting the "other" designation as a catch-all for any iron or steel pipe not explicitly mentioned. This overlooks the specific exclusions and the primary classification criteria of cross-sectional shape and manufacturing method. For example, mistaking a circular pipe with a specific surface treatment for an "other" non-circular pipe can lead to incorrect classification, violating General Rule of Interpretation (GRI) 1 which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes.
How should importers classify products under HS 730539?
The correct procedure for classifying products under HS 730539 involves a systematic approach. First, determine if the product is a tube or pipe of iron or steel. Second, ascertain its cross-sectional shape; if it is not circular, it may fall under this heading. Third, examine the specific subheadings within heading 7305 to ensure it is not covered by more specific descriptions, such as those for circular pipes or those with specific external features. Finally, consult official tariff schedules like the USITC HTS or EU TARIC for definitive guidance and any specific notes.
How is the duty calculated for products under HS 730539?
A shipment of 1,000 kilograms of welded, non-circular steel tubing, declared at a customs value of $2,500 USD, would attract a US duty of $125.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value: 5.0% × $2,500 USD = $125.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 7305.39.0000.
Which trade agreements reduce duties for HS 730539?
Several free trade agreements may reduce the applicable duty rate for HS 730539, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for goods from certain developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific jurisdiction and agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 730539?
HS code 730539 covers 'Other' tubes and pipes of iron or steel, welded, circular cross-section, not forged or from cast iron or steel. Duty rates vary significantly by importing country. For example, the U.S. Most Favored Nation (MFN) rate is 0.00% ad valorem. However, the EU's TARIC system may list rates such as 5.5% ad valorem for certain origins, while the UK Trade Tariff might show a Free rate under specific trade agreements. Always consult the specific tariff schedule of the destination country for the applicable duty.
How is the duty for HS code 730539 calculated, and can you provide an example?
The duty calculation for HS code 730539 typically depends on whether the rate is ad valorem (a percentage of the value) or specific (a fixed amount per unit of quantity), or a combination. For instance, if a country applies a 5.5% ad valorem duty and you import goods valued at $10,000, the duty would be $10,000 × 5.5% = $550. If the duty were a specific rate, say $0.10 per kilogram, and you imported 500 kg, the duty would be 500 kg × $0.10/kg = $50. Always verify the basis of duty calculation in the destination country's tariff.
What classification criteria distinguish HS code 730539 from other headings for iron and steel tubes and pipes?
HS code 730539 is specifically for tubes and pipes of circular cross-section, made of iron or steel, which are welded but not forged or cast. It falls under heading 7305, which covers 'Other tubes and pipes of circular cross-section, of iron or steel'. To be classified here, the product must meet these criteria: 1. Material: Iron or steel. 2. Manufacturing Method: Welded (not seamless, forged, or cast). 3. Cross-section: Circular. 4. Exclusion: Not of cast iron or forged iron/steel. If the product is not circular, or is seamless, or made by forging/casting, it would fall under a different HS code (e.g., 7303, 7304, 7306).
What documentation is typically required for importing goods classified under HS code 730539?
Standard import documentation for HS code 730539 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin if preferential duty rates are claimed. Depending on the importing country and the specific product, additional documents like inspection certificates or compliance declarations might be necessary to ensure adherence to national standards or trade agreements. Always confirm specific requirements with the customs authority of the destination country.
How do trade agreements, such as USMCA or EU trade deals, affect the duty rates for HS code 730539?
Trade agreements can significantly reduce or eliminate duties for goods classified under HS code 730539 if the goods meet the rules of origin stipulated in the agreement. For example, under the United States-Mexico-Canada Agreement (USMCA), qualifying tubes and pipes might receive preferential duty rates, potentially 0.00% or Free, upon proper declaration and proof of origin. Similarly, the EU has numerous trade agreements that could grant reduced tariffs for goods from partner countries. Importers must obtain a valid certificate of origin and ensure the goods meet the specific origin criteria to benefit from these preferential rates.