HS 730110 Sheet piling
Quick Answer: Sheet piling imported under HS 730110 enters the UK at 0.00%, the EU at 0.00%, and the US at a Free rate (MFN). This Harmonized System code covers interlocking steel sections, typically hot-rolled, used in construction for retaining walls, cofferdams, and other earth-retaining structures. These are characterized by their ability to interlock to form a continuous barrier. Importers should note that while the MFN rates are favorable in these key markets, specific trade agreements or anti-dumping duties could potentially apply, requiring verification. CustomTariffs aggregates this tariff information for ease of reference.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7301100000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7301100000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7301100000 | Free | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 730110 cover?
This subheading covers sheet piling of iron or steel, whether or not punched, of a thickness exceeding 0.5 mm. According to the World Customs Organization's Harmonized System Nomenclature, this category includes interlocking metal sections designed for use in constructing retaining walls, cofferdams, and other structures to prevent the passage of water or soil. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these are typically hot-rolled or cold-formed steel sheets with interlocking edges, often used in civil engineering projects.
What falls outside HS 730110?
The following products are excluded from HS 730110: sheet piling made from materials other than iron or steel, such as plastic or wood. Additionally, steel sheets with a thickness of 0.5 mm or less, even if designed for piling purposes, are classified elsewhere, typically under heading 7309 or 7310. Solid steel bars or rods, and fabricated structural components not specifically designed as interlocking sheet piling, are also excluded and would be classified under different headings within Chapter 73.
What are common classification mistakes for HS 730110?
A common error is misclassifying steel sheets that are not specifically designed or manufactured as interlocking sheet piling. For instance, standard flat steel sheets, even if intended for later fabrication into piling, do not meet the criteria for this subheading. Furthermore, confusion can arise with products that are punched or perforated but do not possess the characteristic interlocking profile. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial.
How should importers classify products under HS 730110?
The correct procedure for classifying products under HS 730110 involves a thorough examination of the product's physical characteristics and intended use. Importers and customs brokers must verify that the product is indeed sheet piling made of iron or steel, with a thickness exceeding 0.5 mm, and possesses the necessary interlocking features. Consulting product specifications, manufacturer's declarations, and the official tariff schedules of the importing country, such as the UK Trade Tariff, is essential to ensure accurate classification.
How is the duty calculated for products under HS 730110?
A shipment of 100 metric tons of interlocking steel sheet piling, declared at a customs value of $75,000 USD, would attract a US duty of $5,625. This is calculated using the Most Favored Nation (MFN) duty rate of 7.5% ad valorem, applied to the declared customs value ($75,000 USD × 0.075 = $5,625 USD). This calculation is based on the duty rates published in the USITC Harmonized Tariff Schedule of the United States (HTSUS).
Which trade agreements reduce duties for HS 730110?
Several free trade agreements may reduce the applicable duty rate for HS 730110, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating sheet piling from Canada and Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement is typically required. Additionally, the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may offer preferential rates for originating goods from member countries like Japan and Australia, often resulting in duty-free entry.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 730110 (Sheet piling)?
Import duty rates for HS code 730110 (Sheet piling) can vary by country. For example, under the United States Harmonized Tariff Schedule (USHTS), the general Most Favored Nation (MFN) duty rate is Free. In the European Union, under TARIC, the rate is also Free. The UK Trade Tariff also lists a duty rate of Free. Always verify the specific rate applicable to your country of import and origin of goods, as preferential agreements or specific trade policies may apply.
How is sheet piling classified under HS code 730110?
HS code 730110 specifically covers 'Sheet piling of iron or non-alloy steel, whether or not drilled, punched or fashioned into shape, or made up into composite products'. Classification hinges on the material (iron or non-alloy steel) and the form (sheet piling). Sheet piling is characterized by interlocking edges designed for driving into the ground to form a barrier, typically used in construction for retaining walls, cofferdams, and excavation support. Goods that do not meet these criteria, such as plain steel sheets or plates not designed for interlocking and driving, would be classified elsewhere.
What documentation is typically required for importing sheet piling under HS code 730110?
Standard import documentation for HS code 730110 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, a certificate of origin may be required to claim preferential duty rates under trade agreements. Importers should also be prepared to provide technical specifications or product literature to substantiate the classification if requested by customs authorities. For specific requirements, consult the customs regulations of the importing country.
How is the duty calculated for sheet piling if a duty were applicable?
While many countries currently list a Free duty rate for HS code 730110, if a duty were applicable, it would typically be calculated based on either an ad valorem rate (a percentage of the value) or a specific rate (a fixed amount per unit of quantity), or a combination of both. For instance, if the duty rate was 2% ad valorem and the declared value of the imported sheet piling was $10,000, the duty would be $10,000 × 0.02 = $200. If there was also a specific duty, for example, $5 per metric ton, and the shipment weighed 50 metric tons, an additional $250 ($5/ton × 50 tons) would be levied. The total duty would be the sum of applicable rates.
Which common trade agreements might affect the duty rates for HS code 730110?
Trade agreements can significantly impact duty rates. For example, under the United States-Mexico-Canada Agreement (USMCA), goods originating from Canada or Mexico may benefit from preferential duty rates, often Free, for products classified under 730110. Similarly, the Comprehensive Economic and Trade Agreement (CETA) between the EU and Canada, or other Free Trade Agreements (FTAs) the importing country has with the country of origin, could provide duty-free or reduced-duty access. It is crucial for importers to determine the country of origin of the sheet piling and check if it qualifies for preferential treatment under any applicable trade agreements.