HS 722880 Hollow drill bars and rods
Quick Answer: Hollow drill bars and rods imported under HS 722880 enter the UK at 0.00%, the EU at 0.00%, and the US at a duty-free rate under the Most Favored Nation (MFN) tariff. This classification covers bars and rods, of circular cross-section, specifically designed for drilling purposes, which are hollow throughout their length. These are typically used in mining and construction for creating boreholes. Importers should be aware of potential differences in duty rates for other trade agreements, as the US also has a 30% tariff line within this category, indicating a need for careful verification of the applicable rate based on origin and trade status. CustomTariffs aggregates this information for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7228800000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7228800000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7228800000 | Free | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 722880 cover?
This subheading covers hollow drill bars and rods of iron or steel, as defined by the World Customs Organization's Harmonized System (WCO HS) nomenclature. According to the US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS), this category specifically includes bars and rods of iron or non-alloy steel that are hollowed out, typically for use in drilling operations. The EU's TARIC database also confirms this scope, focusing on the characteristic hollow cross-section designed for the passage of drilling fluid or flushing media.
What falls outside HS 722880?
The following products are excluded from HS 722880: solid drill bars and rods, which are classified under other subheadings within heading 7228. Additionally, finished drill bits, even if attached to a hollow bar, would be classified separately based on the drill bit's primary function. Seamless tubes and pipes of iron or steel, even if suitable for drilling, are generally classified under Chapter 73 unless specifically designed and presented as drill bars and rods with their characteristic hollow cross-section for this purpose.
What are common classification mistakes for HS 722880?
A common error is misclassifying hollow bars and rods intended for general structural or piping purposes under this subheading. General Rules for the Interpretation of the Harmonized System (GRI) 1 and 3 are crucial here. If a product could be classified under multiple headings, the heading providing the most specific description shall be preferred. Hollow drill bars and rods are specifically designed for drilling, distinguishing them from general-purpose hollow sections.
How should importers classify products under HS 722880?
The correct procedure for classifying products under HS 722880 involves a thorough examination of the product's physical characteristics and intended use. Importers and customs brokers must verify that the bars and rods are indeed hollow and specifically manufactured for drilling applications. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and referencing the WCO HS Explanatory Notes will ensure accurate classification.
How is the duty calculated for products under HS 722880?
A shipment of 1,000 kilograms of hollow drill bars made of alloy steel, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the declared customs value ($5,000 USD × 0.03 = $150.00). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for subheading 722880.0000.
Which trade agreements reduce duties for HS 722880?
Several free trade agreements may reduce the applicable duty rate for HS 722880, including the United States-Mexico-Canada Agreement (USMCA), where qualifying products may enter duty-free. Originating products from Canada and Mexico benefit from this preferential rate. For imports into the United Kingdom, the UK-EU Trade and Cooperation Agreement may offer preferential rates, potentially Free, for goods originating in the EU, requiring an EUR.1 movement certificate or an origin declaration. The EU's TARIC system details specific preferential rates for various origin countries.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 722880, 'Hollow drill bars and rods'?
The duty rates for HS code 722880 can vary significantly by importing country. For example, under the United States Harmonized Tariff Schedule (USHTS), the Most Favored Nation (MFN) rate is Free (0.00%). However, preferential rates under trade agreements may apply. In the European Union, under the TARIC system, the rate can be 0.00% for certain origins, but may be higher for others. The UK Trade Tariff also lists specific rates, often Free for many origins but potentially subject to tariffs for others. Always consult the specific tariff schedule of the importing country for the definitive rate applicable to your origin and circumstances.
What specific criteria define 'hollow drill bars and rods' for HS classification under 722880?
HS code 722880 specifically covers hollow bars and rods of alloy steel or high-carbon steel, designed for drilling purposes. Key classification criteria include: 1. Material: Must be made of alloy steel or high-carbon steel. 2. Form: Must be in the form of hollow bars or rods. 3. Function: Primarily intended for use as drill bars or rods. This means they are manufactured with a central bore, often with specific cross-sectional shapes and dimensions suitable for transmitting torque and flushing cuttings during drilling operations. Items not meeting these criteria, such as solid bars or those not intended for drilling, would be classified elsewhere.
How is the import duty for HS 722880 calculated, and can you provide an example?
The calculation of import duty depends on the duty rate applied (ad valorem, specific, or compound). For HS 722880, if an ad valorem rate applies, the duty is a percentage of the declared customs value of the goods. For instance, if the duty rate is 3.5% ad valorem and the declared customs value of a shipment of hollow drill bars is $10,000, the duty would be calculated as: $10,000 (Customs Value) × 0.035 (Duty Rate) = $350. If a specific duty applies (e.g., per kilogram), the calculation would be rate × net weight. Always verify the applicable duty basis (ad valorem, specific, or compound) in the importing country's tariff schedule.
What documentation is typically required for importing hollow drill bars and rods (HS 722880)?
Standard import documentation for HS code 722880 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list specifying the contents of each package; and a bill of lading or air waybill as the transport document. Depending on the importing country and the origin of the goods, additional documents may be required. These could include a certificate of origin to claim preferential duty rates under trade agreements, and potentially material test certificates to verify the alloy or high-carbon steel composition. Importers and customs brokers should consult the specific import regulations of the destination country.
Which trade agreements commonly offer preferential duty rates for HS 722880, and how can importers benefit?
Several trade agreements can provide preferential duty rates for HS 722880. For example, goods originating from countries that are signatories to the USMCA (United States-Mexico-Canada Agreement) may benefit from reduced or zero duties when imported into the United States, Canada, or Mexico, provided they meet the rules of origin. Similarly, goods from countries within the EU may benefit from internal tariff elimination. Importers can benefit by obtaining a valid Certificate of Origin from their supplier, which must be presented to customs authorities at the time of import. This certificate verifies that the goods meet the specific rules of origin stipulated in the relevant trade agreement, thereby qualifying for the preferential tariff treatment and reducing the overall import cost.