HS 722599 Other
Quick Answer: Flat-rolled products of other alloy steel, of a width not exceeding 600 mm, not further worked than cold-rolled (cold-reduced) or cold-finished, and other flat-rolled products of other alloy steel, enter the UK and EU duty-free, while entering the US at rates ranging from Free to 28% ad valorem. This residual category, HS 722599, encompasses alloy steel flat-rolled products that do not fit into more specific subheadings within Chapter 72. Importers should carefully review the specific alloy composition and processing to ensure correct classification, as duty rates can vary significantly by jurisdiction. CustomTariffs aggregates this data, highlighting the importance of precise classification for compliance and cost management.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7225990000 | 0.00 % | — | — |
| 7225990022 | 0.00 % | — | — |
| 7225990025 | 0.00 % | — | — |
| 7225990045 | 0.00 % | — | — |
| 7225990092 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7225990011 | 0.00 % | — | — |
| 7225990000 | 0.00 % | — | — |
| 7225990022 | 0.00 % | — | — |
| 7225990025 | 0.00 % | — | — |
| 7225990045 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 72259900 | Free | — | — |
| 7225990090 | — | — | ["kg"] |
| 7225990010 | — | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 722599 cover?
This subheading covers flat-rolled products of other alloy steel, not further worked than cold-rolled (cold-reduced), with a width exceeding 600 mm, and of a thickness exceeding 0.5 mm but not exceeding 3 mm, which are not clad, plated, or coated. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, this category is a residual one for alloy steel flat-rolled products that do not fit into more specific subheadings within heading 7225, provided they meet the specified dimensions and material composition criteria.
What falls outside HS 722599?
The following products are excluded from HS 722599: flat-rolled products of stainless steel or of silicon-electrical steel, which are classified under other subheadings of heading 7225. Additionally, products that are clad, plated, or coated, such as galvanized or tin-plated steel, are excluded and would be classified under their respective headings based on the coating material. Products with a thickness outside the 0.5 mm to 3 mm range, or a width not exceeding 600 mm, are also not covered by this subheading.
What are common classification mistakes for HS 722599?
A common error is misclassifying products based on their intended use rather than their intrinsic material characteristics and physical form. For instance, mistaking a product for "other alloy steel" when it actually meets the definition of stainless steel (which has its own specific classification) is a frequent mistake. Furthermore, failing to accurately determine the thickness and width specifications, or overlooking a plating or coating that would necessitate classification elsewhere, are also common pitfalls, often violating General Rule of Interpretation (GRI) 1 of the Harmonized System.
How should importers classify products under HS 722599?
The correct procedure for classifying products under HS 722599 involves a systematic review of the product's material composition to confirm it is "other alloy steel" (i.e., not stainless or silicon-electrical steel). Importers and customs brokers must then verify the dimensions: a width exceeding 600 mm and a thickness between 0.5 mm and 3 mm. Crucially, the product must not be clad, plated, or coated. Consulting the official tariff schedules of the importing country, such as the USITC Harmonized Tariff Schedule (HTS) or the EU's TARIC database, is essential for definitive classification.
How is the duty calculated for products under HS 722599?
A shipment of 1,000 kilograms of cold-rolled alloy steel sheets, measuring 1.5 mm thick and 700 mm wide, declared at a customs value of $2,500 USD, would attract a US duty of $125.00. This is calculated using the U.S. Harmonized Tariff Schedule (HTS) Most Favored Nation (MFN) duty rate of 5.0% ad valorem (5.0% × $2,500 USD = $125.00). This calculation assumes the product meets all criteria for HS 722599 and no preferential duty rates apply.
Which trade agreements reduce duties for HS 722599?
Several free trade agreements may reduce the applicable duty rate for HS 722599. For instance, under the United States-Mexico-Canada Agreement (USMCA), originating goods from Canada or Mexico can enter the U.S. duty-free. Similarly, goods originating from countries benefiting from the Generalized System of Preferences (GSP) may also receive reduced or zero duties. To claim these preferences, a valid origin declaration or certificate, such as a USMCA certification of origin or a GSP Form A, is typically required, depending on the specific agreement and importing country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 722599?
HS code 722599 covers 'Other flat-rolled products of iron or non-alloy steel, of a width exceeding 600 mm, not further worked than cold-rolled (cold-reduced) or cold-finished, of a thickness of 0.5 mm or more, not clad, plated or coated, other than of electrical sheet or grain-oriented silicon steel'. Duty rates vary significantly by importing country. For instance, the U.S. Most Favored Nation (MFN) rate is often 0.00%, while other countries may have higher rates. The EU TARIC system and the UK Trade Tariff provide specific rates for those regions. It is crucial to consult the official tariff schedule of the destination country for the precise duty applicable to your shipment.
How is the duty calculated for HS code 722599, and can you provide an example?
The duty calculation depends on whether the rate is ad valorem (a percentage of the value) or specific (a fixed amount per unit of quantity), or a combination. For example, if a country applies a 5% ad valorem duty on a shipment of goods classified under HS 722599 with a declared customs value of $10,000, the duty would be calculated as: 5% of $10,000 = $500. If there were also a specific duty, such as $10 per metric ton, and the shipment weighed 20 metric tons, an additional $200 ($10/ton * 20 tons) would be added, for a total duty of $700. Always verify the exact duty basis (ad valorem, specific, or compound) in the destination country's tariff schedule.
What are the classification criteria for HS code 722599, and when would a product NOT be classified here?
HS code 722599 applies to flat-rolled products of iron or non-alloy steel meeting specific criteria: width over 600 mm, thickness of 0.5 mm or more, and not further worked than cold-rolled or cold-finished. Crucially, it excludes products that are clad, plated, or coated, as well as electrical sheet or grain-oriented silicon steel. Products that are hot-rolled, have a width of 600 mm or less, a thickness less than 0.5 mm, or have undergone further working (e.g., painting, galvanizing) would be classified under different HS codes within Chapter 72.
Which trade agreements commonly affect the duty rates for HS code 722599?
Trade agreements can significantly reduce or eliminate duties for goods classified under HS 722599. For example, goods originating from countries with a Free Trade Agreement (FTA) with the importing nation may benefit from preferential duty rates. Examples include the United States-Mexico-Canada Agreement (USMCA) for shipments between these countries, or agreements the EU has with various trading partners. Importers must ensure they have the necessary proof of origin documentation (e.g., Certificate of Origin) to claim preferential treatment under any applicable trade agreement.
What documentation is typically required for importing goods under HS code 722599?
Standard import documentation for HS code 722599 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the specific product, additional documents may be required. This could include a certificate of origin to claim preferential duty rates under trade agreements, or specific quality certifications. It is advisable for importers and customs brokers to consult the customs authority of the destination country or a licensed customs broker in that country to confirm all necessary documentation to avoid delays or penalties.