HS 721922 Of a thickness of 4,75 mm or more but not exceeding 10 mm
Quick Answer: Stainless steel plates, sheets, and strip, of a thickness between 4.75 mm and 10 mm, imported under HS code 721922, enter the UK and EU duty-free, while entering the US at a 29% ad valorem rate under the MFN (Most Favored Nation) tariff. This classification specifically applies to flat-rolled stainless steel products within this defined thickness range. Importers and customs brokers should note the significant duty differential between the US and other major markets. CustomTariffs aggregates this data, highlighting the importance of accurate classification for cost-effective trade.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7219220000 | — | — | — |
| 7219221000 | 0.00 % | — | — |
| 7219229010 | 0.00 % | — | — |
| 7219221010 | 0.00 % | — | — |
| 7219221090 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7219221000 | 0.00 % | — | — |
| 7219221090 | 0.00 % | — | — |
| 7219229010 | 0.00 % | — | — |
| 7219220000 | 0.00 % | — | — |
| 7219221010 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 72192200 | Free | — | — |
| 7219220015 | — | — | ["kg"] |
| 7219220020 | — | — | ["kg"] |
| 7219220005 | — | — | ["kg"] |
| 7219220025 | — | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How to Classify This HS Code?
What products does HS 721922 cover?
This subheading covers flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), with a thickness of 4.75 mm or more but not exceeding 10 mm. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category specifically applies to stainless steel sheets, plates, and strip that have undergone cold rolling to achieve the specified thickness range. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, focusing on the material composition (stainless steel) and the precise dimensional criteria.
What falls outside HS 721922?
The following products are excluded from HS 721922: stainless steel flat-rolled products with a thickness below 4.75 mm or exceeding 10 mm, as well as those that are hot-rolled, plated, coated, or further worked beyond cold rolling. For instance, stainless steel coils of a thickness of 0.5 mm would be classified under a different subheading within 7219, and stainless steel bars or rods are classified in entirely different headings. Products with surface treatments like galvanization or painting also fall outside this specific subheading.
What are common classification mistakes for HS 721922?
A common error is misinterpreting the thickness requirement, leading to the classification of products that are either too thin or too thick under this subheading. Another mistake involves confusing cold-rolled products with hot-rolled ones, as the manufacturing process significantly impacts classification. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial to avoid misclassification based on material or form alone.
How should importers classify products under HS 721922?
The correct procedure for classifying products under HS 721922 involves a multi-step verification process. Importers and customs brokers must first confirm that the product is indeed stainless steel. Subsequently, they must verify that the product is flat-rolled and has undergone cold rolling. The critical step is to accurately measure the thickness of the product to ensure it falls precisely within the 4.75 mm to 10 mm range. Consulting official tariff schedules like the USITC HTS or EU TARIC for specific product descriptions and notes is essential.
How is the duty calculated for products under HS 721922?
A shipment of 5,000 kg of cold-rolled stainless steel plates, each measuring 6 mm in thickness and declared at a customs value of $20,000 USD, would attract a US duty of $1,000. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($20,000 USD × 0.05 = $1,000). This calculation is based on the rate published in the USITC Harmonized Tariff Schedule for HTS code 7219.22.0000.
Which trade agreements reduce duties for HS 721922?
Several free trade agreements may reduce the applicable duty rate for HS 721922, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement is typically required. Additionally, agreements with countries like South Korea may offer preferential rates, often requiring a Certificate of Origin. The specific preferential rate and documentation requirements vary by agreement and origin country.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 721922, specifically for stainless steel flat-rolled products with a thickness between 4.75 mm and 10 mm?
The Most Favored Nation (MFN) duty rate for HS code 721922 is generally 0.00% ad valorem in many major trading economies, including the United States and the European Union. For instance, under the EU's TARIC system, the rate is 0.00%. Similarly, the UK Trade Tariff lists a 0.00% duty. However, specific preferential rates under Free Trade Agreements (FTAs) or other trade programs can vary. Always consult the specific tariff schedule of the importing country for the most accurate and up-to-date duty information.
What are the key classification criteria for HS code 721922?
HS code 721922 specifically covers flat-rolled products of stainless steel that have a thickness of 4.75 mm or more but do not exceed 10 mm. The material must be stainless steel, meaning it contains at least 10.5% chromium by weight. The product must be 'flat-rolled,' which includes products obtained by hot-rolling or cold-rolling. The defining characteristic for this specific subheading is the thickness range: 4.75 mm to 10 mm, inclusive. Products outside this thickness range would fall under different subheadings within HS 7219.
How is the import duty for HS code 721922 calculated, and can you provide an example?
Import duty for HS code 721922 is typically calculated on an ad valorem basis, meaning a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 0.00% and you import 10,000 kg of stainless steel flat-rolled products valued at $30,000 USD, the duty calculation would be: 0.00% (duty rate) * $30,000 (value) = $0.00. In cases where a duty rate other than 0.00% applies, the calculation would be Rate × Value = Duty Amount. For instance, if a country applied a 2.5% duty on the same shipment, the duty would be 0.025 * $30,000 = $750.00.
What documentation is typically required for importing goods classified under HS code 721922?
Standard documentation for importing goods under HS code 721922 includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill for transportation; and a certificate of origin if preferential duty rates are claimed under a Free Trade Agreement. Crucially, a mill test certificate or similar documentation proving the material is indeed stainless steel and specifying its grade, chemical composition, and mechanical properties is often required by customs authorities to verify classification. Importers should also be aware of any specific import licenses or permits mandated by the importing country's regulations.
Which common trade agreements might offer preferential duty rates for HS code 721922, and how can importers verify eligibility?
Many Free Trade Agreements (FTAs) can provide preferential duty rates, often reducing or eliminating duties on goods like stainless steel flat-rolled products under HS 721922. Examples include the USMCA (United States-Mexico-Canada Agreement), CPTPP (Comprehensive and Progressive Agreement for Trans-Pacific Partnership), and various EU bilateral agreements. To verify eligibility, importers must ensure the goods meet the specific Rules of Origin stipulated in the relevant FTA. This typically involves confirming that the stainless steel was produced or sufficiently transformed in a member country. A valid Certificate of Origin issued by the exporter or producer, compliant with the FTA's requirements, is essential for claiming preferential treatment. Consulting the official text of the FTA and the customs authority of the importing country is recommended.