HS 720990 Other
Quick Answer: Iron or non-alloy steel flat-rolled products, of a width not exceeding 600 mm, not further worked than cold-rolled (cold-reduced), whether or not coated, plated or clad, and other flat-rolled products of iron or non-alloy steel, of a width not exceeding 600 mm, not elsewhere specified or included, imported under HS 720990 enter the UK at 0.00%, the EU at 0.00%, and the US at 0.4¢/kg + 20% under the MFN rate. This residual classification applies to cold-rolled iron and non-alloy steel flat products under 600mm wide that do not fit into more specific subheadings, including those that are uncoated or coated. Importers should verify specific product characteristics against the detailed tariff notes for each jurisdiction to ensure correct classification and duty assessment, as CustomTariffs aggregates this information.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209900000 | — | — | — |
| 7209902000 | 0.00 % | — | — |
| 7209908000 | 0.00 % | — | — |
| 7209908010 | 0.00 % | — | — |
| 7209908090 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209900000 | 0.00 % | — | — |
| 7209908000 | 0.00 % | — | — |
| 7209908090 | 0.00 % | — | — |
| 7209902000 | 0.00 % | — | — |
| 7209908010 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209900000 | Free | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 720990 cover?
This subheading covers "other" flat-rolled products of iron or non-alloy steel, of a width exceeding 600 mm, not further worked than cold-rolled (cold-reduced), and not plated or coated. According to the World Customs Organization's Harmonized System Nomenclature Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this residual category applies to products that do not fit into the more specific subheadings within heading 7209, provided they meet the general criteria of being cold-rolled flat-rolled products of iron or non-alloy steel exceeding 600 mm in width and lacking further working beyond cold-rolling, plating, or coating.
What falls outside HS 720990?
The following products are excluded from HS 720990: flat-rolled products of iron or non-alloy steel that are hot-rolled (classified under heading 7208), those less than 600 mm in width (classified under heading 7211), products that have undergone further working beyond cold-rolling such as being painted, varnished, or covered with plastics (classified under heading 7210 or 7211 depending on width), and any products made from alloy steel or stainless steel (classified under headings 7219 onwards). For example, cold-rolled steel coils with a plastic coating would be classified elsewhere.
What are common classification mistakes for HS 720990?
A common error is misinterpreting the "not further worked than cold-rolled" provision. Importers may incorrectly classify products that have undergone minor surface treatments, such as pickling or slitting to specific widths, under this subheading when they should be classified elsewhere based on General Rule of Interpretation (GRI) 1 and 2. For instance, if a product has been chemically treated to remove scale beyond simple pickling, it might warrant a different classification. Additionally, confusing width requirements with other headings can lead to misclassification.
How should importers classify products under HS 720990?
The correct procedure for classifying products under HS 720990 involves a systematic review of the product's characteristics against the Explanatory Notes for heading 7209 and the specific wording of subheading 7209.90. Importers and customs brokers must verify that the product is indeed flat-rolled iron or non-alloy steel, exceeds 600 mm in width, has been cold-rolled, and has not been plated, coated, or subjected to any further working beyond what is permitted. Consulting the relevant national tariff schedule, such as the USITC HTS or UK Trade Tariff, is crucial for definitive classification.
How is the duty calculated for products under HS 720990?
A shipment of 10 metric tons of cold-rolled, uncoated steel sheets, not further worked than cold-rolled, with a declared customs value of $15,000 USD, would attract a US duty of $1,500.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared customs value ($15,000 USD × 10% = $1,500.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for subheading 7209.90.0000.
Which trade agreements reduce duties for HS 720990?
Several free trade agreements may reduce the applicable duty rate for HS 720990, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. The Generalized System of Preferences (GSP) may also offer reduced or Free duty rates for originating goods from certain developing countries. To claim these preferential rates, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific jurisdiction and agreement.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 720990?
HS code 720990, designated for 'Other' flat-rolled products of iron or non-alloy steel, often carries varied duty rates depending on the importing country and specific product characteristics. For instance, under the US Harmonized Tariff Schedule (USHTS), the Most Favored Nation (MFN) duty rate is 0.00%. However, other countries may have different rates. For example, the EU's TARIC system might assign specific rates based on further subheadings or origin. Always consult the specific tariff schedule of the destination country for precise rates. The UK Trade Tariff also lists specific rates which can be 0.00% for certain origins or under specific trade agreements.
How is the duty calculated for HS code 720990 if it's not an ad valorem rate?
While many entries under 720990 might have an ad valorem (percentage of value) duty, some jurisdictions may apply a specific duty based on weight (e.g., cents per kilogram). For example, if a country applies a duty of 0.4¢/kg + 20% ad valorem, and you import 1,000 kg of goods valued at $500, the calculation would be: (0.4¢/kg * 1000 kg) + (20% * $500). This equates to (400¢ or $4.00) + ($100.00), resulting in a total duty of $104.00. It is crucial to identify the exact duty calculation method for the specific tariff code in the destination country.
What criteria distinguish products classified under HS 720990 from other headings in Chapter 72?
HS code 720990 is a residual category for flat-rolled products of iron or non-alloy steel that do not fit into more specific subheadings within 7209. Chapter 72 covers 'Iron and Steel'. Heading 7209 specifically deals with 'Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated'. If a product meets these width and cold-rolled criteria but is not further specified by coating, plating, or other treatments covered in other 7209 subheadings, it may fall under 720990. Importers must ensure the product meets all preceding criteria for 7209 and is not specifically provided for elsewhere.
What documentation is typically required for importing goods classified under HS 720990?
Standard import documentation is generally required for HS code 720990. This typically includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin, especially if preferential duty rates are claimed under a trade agreement. Depending on the importing country and the specific nature of the steel product, additional certifications, such as compliance with specific standards (e.g., ASTM, EN) or quality control reports, might be necessary. Always verify the specific requirements with the customs authority of the importing nation.
Do common trade agreements, like USMCA or EU trade deals, affect the duty rates for HS 720990?
Yes, trade agreements can significantly impact duty rates for HS code 720990. For example, under the United States-Mexico-Canada Agreement (USMCA), originating goods may qualify for preferential duty rates, often 0.00%, provided all rules of origin are met and a valid Certificate of Origin is provided. Similarly, the EU has numerous Free Trade Agreements (FTAs) with various countries that could reduce or eliminate duties on originating steel products. Importers must consult the specific provisions of applicable trade agreements and ensure their goods meet the origin requirements to benefit from preferential treatment. The USITC and the EU TARIC database are excellent resources for checking preferential rates.