HS 720917 Of a thickness of 0,5 mm or more but not exceeding 1 mm
Quick Answer: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated, of a thickness of 0.5 mm or more but not exceeding 1 mm, imported under HS 720917 enters the UK at 0.00%, the EU at 0.00%, and the US at a duty rate of 0.4¢/kg + 20% under the MFN rate. This classification specifically covers cold-rolled steel sheets and coils within a precise thickness range, excluding those with any surface treatments. Importers should be aware of the specific weight-based and ad valorem components of the US duty. CustomTariffs aggregates this data to assist in trade compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209170000 | — | — | — |
| 7209171000 | 0.00 % | — | — |
| 7209179000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209170000 | 0.00 % | — | — |
| 7209179000 | 0.00 % | — | — |
| 7209171000 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7209170040 | — | — | ["kg"] |
| 7209170060 | — | — | ["kg"] |
| 7209170091 | — | — | ["kg"] |
| 72091700 | Free | — | — |
| 7209170045 | — | — | ["kg"] |
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
How to Classify This HS Code?
What products does HS 720917 cover?
This subheading covers flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), and of a thickness of 0.5 mm or more but not exceeding 1 mm. According to the World Customs Organization (WCO) Harmonized System Nomenclature, these products are characterized by their specific thickness range and the cold-rolling process, which imparts a superior surface finish and closer dimensional tolerances compared to hot-rolled products. For example, cold-rolled steel sheets meeting these thickness criteria, often used in automotive bodies or appliance casings, fall under this classification.
What falls outside HS 720917?
The following products are excluded from HS 720917: flat-rolled products with a thickness less than 0.5 mm or greater than 1 mm, even if they are otherwise of iron or non-alloy steel and cold-rolled. Additionally, hot-rolled products, even within the specified thickness range, are classified under different headings. Products made of alloy steel or stainless steel, or those that have undergone further working such as coating or plating beyond basic surface preparation, are also excluded and would be classified in more specific subheadings or headings, such as those for coated flat-rolled products.
What are common classification mistakes for HS 720917?
A common error is misinterpreting the thickness requirement, leading to the classification of products that are either too thin or too thick under this subheading. For instance, steel sheets with a thickness of 0.45 mm would not meet the minimum 0.5 mm threshold and would therefore be classified elsewhere. Another mistake involves confusing cold-rolled products with hot-rolled products, which have different properties and are classified under different headings. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial.
How should importers classify products under HS 720917?
The correct procedure for classifying products under HS 720917 involves a precise determination of the material composition (iron or non-alloy steel), the rolling process (cold-rolled), the width (600 mm or more), and critically, the exact thickness. Importers and customs brokers must consult technical specifications and product data sheets to confirm the thickness falls strictly between 0.5 mm and 1 mm, inclusive. Verification against the official tariff schedule, such as the USITC Harmonized Tariff Schedule (HTS) or the EU's TARIC database, is essential to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 720917?
A shipment of 10,000 kg of cold-rolled steel sheets, each measuring 0.75 mm in thickness and declared at a customs value of $15,000 USD, would attract a US duty of $750.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($15,000 USD × 0.05 = $750.00). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule for subheading 7209.17.0000.
Which trade agreements reduce duties for HS 720917?
Several free trade agreements may reduce the applicable duty rate for HS 720917, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Canada or Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for goods from member countries like Japan. To claim these preferences, a self-certified origin statement for USMCA or a specific origin declaration for CPTPP is typically required, depending on the jurisdiction and the specific agreement's rules of origin.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 720917 (flat-rolled products of iron or non-alloy steel, of a thickness of 0.5 mm or more but not exceeding 1 mm, not further worked than cold-rolled)?
Import duty rates for HS 720917 vary by importing country. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) duty rate is 0.00% ad valorem. In the European Union, under TARIC, the rate can be 0.00% ad valorem for many origins, but specific trade agreements or anti-dumping measures may apply. The UK Trade Tariff also shows a 0.00% duty for many origins. Always consult the specific tariff schedule of the destination country for the applicable rate.
How is the duty calculated for HS 720917 if a specific duty rate applies, such as 0.4¢/kg + 20% ad valorem?
If a combined duty rate like 0.4¢/kg + 20% ad valorem applies, the total duty is the sum of a specific duty based on weight and an ad valorem duty based on value. For instance, if you import 1,000 kg of steel valued at $2,000 USD (equivalent to $2.00 USD per kg), the duty would be calculated as follows: (1,000 kg * $0.004/kg) + (20% of $2,000 USD) = $4.00 USD + $400.00 USD = $404.00 USD. The specific currency and conversion rates will depend on the importing country's regulations.
What are the key classification criteria for HS code 720917, distinguishing it from other codes in Chapter 72?
HS code 720917 specifically covers flat-rolled products of iron or non-alloy steel that have been cold-rolled. The critical defining characteristics are: 1. Material: Must be iron or non-alloy steel. 2. Form: Flat-rolled product (e.g., coils, sheets, plates). 3. Processing: Not further worked than cold-rolled (meaning it has undergone cold reduction). 4. Thickness: Specifically between 0.5 mm and 1.0 mm, inclusive. Products outside this thickness range or made of alloy steel would fall under different HS codes.
Which trade agreements commonly provide preferential duty rates for HS code 720917, and what documentation is typically required?
Many free trade agreements (FTAs) can provide preferential duty rates, often reducing them to 0.00% for goods originating from partner countries. Examples include agreements between the US and countries like Australia, or EU agreements with various trading partners. To claim preferential treatment, importers typically need a 'Proof of Origin' document, such as a Certificate of Origin or a statement on the invoice, issued by the exporter, certifying that the goods meet the rules of origin stipulated in the relevant FTA. Always verify the specific requirements of the applicable FTA.
Are there any specific documentation requirements beyond a commercial invoice and bill of lading for importing goods under HS 720917?
While a commercial invoice, packing list, and bill of lading are standard, importing steel products under HS 720917 may require additional documentation depending on the destination country and any specific trade measures in place. This could include a Certificate of Origin (especially if claiming preferential duties under an FTA), mill test certificates to verify material composition and specifications, or import licenses if the product is subject to quotas or specific regulations. Importers should check the importing country's customs authority website for any specific or additional requirements for steel products.