HS 720825 Other, in coils, not further worked than hot-rolled, pickled

Quick Answer: Steel products imported under HS 720825 enter the UK at 0.00%, the EU at 0.00%, and the US with rates varying from Free to 20% depending on specific product characteristics. This classification covers flat-rolled steel products of iron or non-alloy steel, which have been hot-rolled and then pickled (treated with acid to remove scale), and are supplied in coils. These are not further worked beyond these initial processing steps. Importers should note the varying US tariff rates, which require careful examination of the specific product details to determine the correct classification and applicable duty. CustomTariffs aggregates this data for compliance professionals.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
7208250000 0.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
7208250000 0.00 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
7208253000 Free — ["kg"]
720825 — — —
7208256000 Free — ["kg"]

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

How to Classify This HS Code?

```html

What products does HS 720825 cover?

This subheading covers flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, pickled, and presented in coils. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and the USITC Harmonized Tariff Schedule (HTS), this category specifically includes products that have undergone a pickling process to remove surface impurities after hot rolling, but have not been subjected to further mechanical or chemical treatments beyond coiling. The EU TARIC system also aligns with this definition, emphasizing the "not further worked" aspect.

What falls outside HS 720825?

The following products are excluded from HS 720825: flat-rolled products that have been further worked beyond pickling and coiling, such as those that are galvanized, tinned, plated, or coated with plastics. Products of a width less than 600 mm are classified under other headings. Additionally, hot-rolled products that have not been pickled, or those that have undergone processes like cold-rolling, annealing, or surface treatments beyond simple pickling, are classified elsewhere within heading 7208 or other chapters of the HS nomenclature.

What are common classification mistakes for HS 720825?

A common error is misinterpreting "not further worked than hot-rolled, pickled." Importers may mistakenly classify products that have undergone additional treatments like passivation, oiling for rust prevention beyond basic pickling, or minor surface conditioning as falling under this subheading. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the heading and any relative section or chapter notes. If a product has any additional working beyond the specified pickling and coiling, it likely belongs to a more specific subheading or a different heading entirely.

How should importers classify products under HS 720825?

The correct procedure for classifying products under HS 720825 involves a thorough examination of the product's manufacturing process and physical characteristics. Importers and customs brokers must verify that the steel is indeed flat-rolled, at least 600 mm wide, hot-rolled, pickled to remove scale, and presented in coils. Crucially, they must confirm that no further working beyond these specified steps has occurred. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the EU TARIC, and referencing the relevant Explanatory Notes is essential for accurate classification.

How is the duty calculated for products under HS 720825?

A coil of hot-rolled, pickled, flat-rolled steel, measuring 1,000 mm in width and weighing 5,000 kg, declared at a customs value of $4,000 USD, would attract a US duty of $140.00. This is calculated using the Most Favored Nation (MFN) duty rate of 0.3% ad valorem, applied to the declared customs value ($4,000 USD × 0.003 = $12.00), plus a specific duty of $0.028 per kilogram ($0.028/kg × 5,000 kg = $140.00). The total duty is $152.00. This calculation is based on the USITC Harmonized Tariff Schedule (HTS) for subheading 7208.25.0000.

Which trade agreements reduce duties for HS 720825?

Several free trade agreements may reduce the applicable duty rate for HS 720825, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the United States duty-free. For example, originating steel from Canada or Mexico would benefit from a 0% duty rate. To claim this preference, a valid origin declaration or certificate of origin, as specified by USMCA regulations, is required. Other agreements may offer reduced rates depending on the country of origin and specific product qualifications.

```

Which HS Codes Are Related?

HS 720836 HS 720851 HS 722530 HS 720810 HS 720925 HS 721911

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the typical import duty rates for HS code 720825, specifically for 'Other, in coils, not further worked than hot-rolled, pickled' steel products?

The duty rates for HS code 720825 vary significantly by importing country. For example, under the United States Harmonized Tariff Schedule (USHTS), the Most Favored Nation (MFN) duty rate is 0.00%. However, preferential rates may apply under trade agreements. The UK Global Tariff lists a duty rate of 0.00% for this code. The EU TARIC system shows a 0.00% duty rate for most origins, but specific trade agreements or anti-dumping measures could alter this. Always consult the specific tariff schedule of the importing country for the most accurate and up-to-date rates.

What specific criteria define a product as 'Other, in coils, not further worked than hot-rolled, pickled' under HS code 720825?

HS code 720825 falls under Chapter 72 of the Harmonized System, which covers iron and steel. The key elements for classification are: 1. Material: It must be flat-rolled products of iron or non-alloy steel. 2. Form: The product must be in coils. 3. Processing: It must be hot-rolled (rolled at a high temperature, typically above the recrystallization temperature of the steel) and pickled (treated with acid to remove scale or rust). 'Other' signifies that it does not meet the specific criteria for other subheadings within 7208, such as those for specific widths or thicknesses, or those with surface coatings. Reference to the Explanatory Notes of the WCO (World Customs Organization) for Chapter 72 provides detailed guidance on these processing terms.

What documentation is typically required for importing goods classified under HS code 720825?

Standard import documentation for HS code 720825 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, a certificate of origin may be required, especially if preferential duty rates are claimed under a trade agreement. For steel products, some countries may also require specific quality certificates or mill test certificates to verify the material's specifications. It is crucial for importers and customs brokers to verify the exact documentation requirements with the customs authority of the destination country.

How are duties calculated for HS code 720825, and can you provide an example?

The duty calculation for HS code 720825 typically depends on the duty rate structure of the importing country. Many countries use an ad valorem rate (a percentage of the value of the goods), while others may use specific duties (a fixed amount per unit of weight or volume), or a combination. For example, if a country applies a 2.5% ad valorem duty on HS 720825, and an importer declares goods valued at $10,000 USD, the ad valorem duty would be calculated as: $10,000 USD (Value) × 2.5% (Duty Rate) = $250 USD (Duty Amount). If a specific duty were applicable, such as $50 per metric ton, the calculation would be based on the net weight of the imported steel coils.

Which major trade agreements might offer preferential duty rates for HS code 720825, and how can importers benefit?

Importers can benefit from preferential duty rates under various trade agreements if the steel products classified under HS 720825 originate from countries that are signatories to these agreements. For example, goods originating from Canada or Mexico might benefit from preferential rates under the United States-Mexico-Canada Agreement (USMCA), though specific rules of origin must be met. Similarly, the EU has numerous Free Trade Agreements (FTAs) with countries worldwide that could reduce or eliminate duties. To benefit, importers must obtain a valid Certificate of Origin demonstrating that the goods meet the rules of origin stipulated in the relevant trade agreement. Consulting the importing country's customs authority or a trade agreement database (like the EU TARIC or USITC's trade agreement pages) is essential to identify applicable preferences.