HS 720219 Other
Quick Answer: Ferro-manganese containing, by weight, more than 2% of iron enters the UK at 0.00%, the EU at 2.70% ad valorem, and the US with rates varying from 2.3% to 22% ad valorem, with certain countries receiving duty-free treatment. This residual classification under HS 720219 applies to ferro-manganese not specifically defined by its manganese content. Importers should verify the precise manganese percentage to ensure correct classification and duty application, as this is a critical factor in determining the applicable tariff. CustomTariffs aggregates this data, highlighting the importance of precise product specification for international trade compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7202190000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7202190000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7202191000 | 2.3% | Free (17 programs) | ["kg","Mn kg"] |
| 720219 | — | — | — |
| 7202195000 | 1.4% | Free (17 programs) | ["kg","Mn kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7202.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 720219 cover?
This subheading covers "Other" ferro-alloys not specified in preceding subheadings of Heading 7202. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database, this category is a residual one for ferro-alloys that do not fit into more specific classifications, such as ferrosilicon or ferromanganese. It typically includes ferro-alloys with elements like chromium, vanadium, or molybdenum, provided they meet the definition of ferro-alloy (i.e., an alloy of iron with a high proportion of one or more other elements). The key is that the product is primarily iron and contains a significant percentage of other alloying elements, intended for use in the manufacture of iron or steel.
What falls outside HS 720219?
The following products are excluded from HS 720219: pure metals (ferrous or non-ferrous), master alloys of non-ferrous metals, and ferro-alloys that are specifically enumerated in preceding subheadings of Heading 7202, such as ferrosilicon (7202.21 and 7202.29), ferromanganese (7202.11 and 7202.19), ferrosilicon-manganese (7202.30), and ferrochrome (7202.41 and 7202.49). Also excluded are products that are not primarily iron-based or do not contain a significant proportion of alloying elements as defined for ferro-alloys. For instance, steel scrap or iron ore would be classified elsewhere.
What are common classification mistakes for HS 720219?
A common error is misinterpreting the "Other" designation as a catch-all for any iron-based alloy. This can lead to incorrect classification of products that should fall under more specific subheadings within Heading 7202 or even outside of Chapter 72 entirely. For example, classifying a master alloy of a non-ferrous metal with iron as HS 720219, when it should be classified under Chapter 7204 or Chapter 81, depending on the predominant non-ferrous metal. Adherence to the General Rules for the Interpretation of the Harmonized System (GRI), particularly GRI 1 and GRI 3, is crucial to ensure correct classification based on the specific composition and intended use.
How should importers classify products under HS 720219?
The correct procedure for classifying products under HS 720219 involves a detailed analysis of the product's chemical composition and its primary intended use. Importers and customs brokers must first consult the WCO Harmonized System Explanatory Notes and the specific tariff schedule of the importing country (e.g., USITC HTS, EU TARIC, UK Trade Tariff). They should determine if the product is an alloy of iron with a significant proportion of other elements. If it is, and it does not fit any more specific subheading within Heading 7202, then HS 720219 is the appropriate classification. Obtaining a Certificate of Analysis from the manufacturer is essential for verifying the exact composition.
How is the duty calculated for products under HS 720219?
A shipment of ferrovanadium weighing 10,000 kilograms, declared at a customs value of $50,000 USD, would attract a US duty of $5,000.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS code 72029000 (which includes "Other" ferro-alloys like ferrovanadium). The calculation is: 10% of $50,000 USD = $5,000.00. It is imperative to verify the exact duty rate for the specific country of importation and the precise HS code, as rates can vary significantly.
Which trade agreements reduce duties for HS 720219?
Several free trade agreements may reduce the applicable duty rate for HS 720219, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating ferro-alloys from Canada or Mexico may enter the United States duty-free. For example, originating ferrovanadium from Canada would be subject to a 0% preferential rate. To claim this preference, a valid origin declaration or certificate of origin, as specified by USMCA regulations, is required. Other agreements might offer reduced rates depending on the origin country and specific product composition, necessitating a thorough review of each applicable trade pact.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 720219, 'Ferro-manganese, not elsewhere specified or included'?
The Most Favored Nation (MFN) duty rate for HS code 720219 can vary by country. For instance, under the US Harmonized Tariff Schedule (HTS), the general rate is 0.00%. However, other countries may have different rates. The EU's TARIC system and the UK's Trade Tariff also list specific rates. It is crucial to consult the relevant tariff schedule for the importing country to determine the exact duty. For example, some preferential rates under trade agreements might be 0.00% (e.g., for certain partners like AU, BH, CL, CO, IL, JO, KR, MA, OM, PA, PE, SG), while others could be higher, such as 2.70% or 2.3% depending on the origin and specific trade agreement.
How is the duty calculated for HS code 720219 if it has an ad valorem rate?
If the duty rate is an ad valorem rate (a percentage of the value), the calculation is straightforward. For example, if a shipment of ferro-manganese (not elsewhere specified) valued at $10,000 USD is subject to a 2.70% ad valorem duty, the duty amount would be calculated as: $10,000 (Value) × 0.0270 (Duty Rate) = $270.00 USD. Always ensure you are using the correct customs valuation method as per the importing country's regulations.
What are the classification criteria for HS code 720219?
HS code 720219 falls under Chapter 72 of the Harmonized System, which covers 'Iron and Steel'. Specifically, it is within heading 7202, 'Ferro-alloys'. This code, 'Other', is a residual category. It is used for ferro-manganese (defined as an alloy of iron containing by weight 4% or more of manganese and either 1% or more of silicon or 1% or more of aluminum) that is not specifically classified under other subheadings of 7202 (e.g., ferro-manganese with a high manganese content). Classification relies on the chemical composition and physical form of the product, as detailed in the Explanatory Notes to the Harmonized System and national tariff schedules.
What documentation is typically required for importing goods classified under HS 720219?
Standard import documentation for HS code 720219 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin if preferential duty rates are claimed. Depending on the importing country and the specific nature of the ferro-manganese, additional documents such as a certificate of analysis (CoA) confirming the chemical composition might be required to verify compliance with the HS code definition and any specific import regulations.
Which common trade agreements might offer preferential duty rates for HS code 720219?
Several trade agreements can provide preferential duty rates for HS code 720219. For example, under the US HTS, preferential rates are listed for countries like Australia (AU), Bahrain (BH), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Panama (PA), Peru (PE), and Singapore (SG), often at 0.00%. The EU's TARIC and the UK's Trade Tariff also detail preferential rates applicable under agreements with various trading partners. Importers must verify the specific origin of their goods and consult the relevant trade agreement annexes or the importing country's tariff database to confirm eligibility and claim preferential treatment.