HS 701965 Open woven fabrics of a width not exceeding 30 cm
Quick Answer: Open woven fabrics of a width not exceeding 30 cm imported under HS 701965 enter the UK at 6.00%, the EU at 7.00%, and the US at 6% (MFN). This classification pertains to textiles made from glass fibers, woven in an open construction, and specifically limited to those with a width of 30 centimeters or less. These fabrics are often used as reinforcement materials or in filtration applications. Importers should be aware that while the US has a lower MFN rate, other preferential rates may apply depending on the origin. CustomTariffs aggregates this data, highlighting the importance of verifying specific tariff lines for accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7019650012 | 6.00 % | — | — |
| 7019650013 | 6.00 % | — | — |
| 7019650029 | 6.00 % | — | — |
| 7019650000 | 6.00 % | — | — |
| 7019650011 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7019650000 | 7.00 % | — | — |
| 7019650012 | 7.00 % | — | — |
| 7019650014 | 7.00 % | — | — |
| 7019650018 | 7.00 % | — | — |
| 7019650021 | 7.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7019659010 | — | — | ["m<sup>2</sup>","kg"] |
| 701965 | — | — | — |
| 7019655100 | Free | — | ["m<sup>2</sup>","kg"] |
| 7019659090 | — | — | ["m<sup>2</sup>","kg"] |
| 70196590 | 6% | Free (14 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7019.65?
Imports of Open woven fabrics of a width not exceeding 30 cm may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 12 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 701965 cover?
This subheading covers open woven fabrics made from glass fibers, specifically those with a width not exceeding 30 centimeters. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category includes fabrics where the warp and weft yarns are arranged in an open, spaced pattern. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these are textiles constructed from glass filaments or staple fibers, woven in a manner that creates distinct openings between the threads, and are limited to a narrow width.
What falls outside HS 701965?
The following products are excluded from HS 701965: glass fiber fabrics with a width exceeding 30 centimeters, which would be classified under HS 7019.30. Additionally, non-woven glass fiber materials, such as mats or felts (classified under HS 7019.10), and glass fiber yarns or rovings (classified under HS 7019.20) are not included. Fabrics made from other materials, even if woven in an open pattern and within the specified width, are also excluded and would fall under different chapters of the Harmonized System.
What are common classification mistakes for HS 701965?
A common error is misinterpreting the "open woven" characteristic or the width limitation. Importers may mistakenly classify fabrics with a denser weave or those exceeding the 30 cm width limit under this subheading. According to General Interpretative Rule 1 of the Harmonized System, classification is determined by the terms of the headings and any relative section or chapter notes. Failing to accurately measure the fabric width or to correctly identify the weaving structure can lead to incorrect classification, potentially resulting in incorrect duty payments.
How should importers classify products under HS 701965?
The correct procedure for classifying products under HS 701965 involves a multi-step process. First, confirm that the fabric is indeed made of glass fibers. Second, verify that the fabric is "open woven," meaning there are visible spaces between the warp and weft yarns. Third, meticulously measure the width of the fabric to ensure it does not exceed 30 centimeters. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, and reviewing the explanatory notes for Chapter 70 is crucial for accurate classification.
How is the duty calculated for products under HS 701965?
A roll of glass fiber open woven fabric, measuring 25 cm in width and weighing 10 kilograms, declared at a customs value of $500 USD, would attract a US duty of $35.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.5% ad valorem, applied to the declared customs value. The calculation is: 3.5% of $500 USD = $17.50. However, if the fabric were subject to a specific duty based on weight, for example, $3.50 per kilogram, the duty would be $3.50/kg * 10 kg = $35.00. This example uses the MFN rate published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 701965?
Several free trade agreements may reduce the applicable duty rate for HS 701965, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada or Mexico can enter the United States duty-free. To claim this preference, a valid Certificate of Origin or a self-certified origin statement meeting USMCA requirements is necessary. While not directly applicable to this specific HS code, other agreements like the EU's Generalized Scheme of Preferences (GSP) offer reduced or free entry for certain developing countries, requiring documentation like a EUR.1 movement certificate.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 701965, 'Open woven fabrics of a width not exceeding 30 cm'?
Import duty rates for HS code 701965 can vary significantly by country and trade agreement. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) rate is 6.00% ad valorem. However, preferential rates may apply. For instance, goods originating from Canada or Mexico under the USMCA may have a rate of Free. Always consult the specific tariff schedule of the importing country for the most accurate and up-to-date rates. The USITC HTS is a primary source for US import duties.
How is the import duty for HS code 701965 calculated, and can you provide an example?
The duty for HS code 701965 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if the MFN duty rate is 6.00% and you import 100 square meters of fabric valued at $5 per square meter, the total value is $500. The duty would be calculated as 6.00% of $500, which equals $30.00. Some countries may also apply specific duties based on weight or other units, so it's crucial to verify the calculation basis in the importing country's tariff.
What specific classification criteria distinguish HS code 701965 from other codes related to glass fabrics?
HS code 701965 specifically covers 'Open woven fabrics of glass fibers' with a 'width not exceeding 30 cm'. The key distinguishing factors are: 1. Material: Must be made of glass fibers. 2. Construction: Must be 'open woven'. This refers to a specific weaving pattern where warp and weft threads are spaced to create openings. 3. Width: The fabric's width must not exceed 30 cm. Fabrics wider than 30 cm would fall under different subheadings within HS 7019. Reference to the Explanatory Notes of the Harmonized System (WCO) can provide further clarification on 'open woven' construction.
What documentation is typically required when importing goods classified under HS code 701965?
Standard import documentation for HS code 701965 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, to claim preferential duty rates under trade agreements, a Certificate of Origin (COO) is usually required, demonstrating that the goods meet the rules of origin for that specific agreement. For glass fiber fabrics, specific certifications regarding material composition or safety standards might also be requested by customs authorities in certain jurisdictions.
Which common trade agreements might offer preferential duty rates for HS code 701965, and how can importers verify eligibility?
Several trade agreements could offer preferential rates for HS code 701965, depending on the origin of the goods and the importing country. Examples include the USMCA (United States-Mexico-Canada Agreement), EU trade agreements with various countries, and the UK's Global Tariff. To verify eligibility, importers must: 1. Confirm the country of origin of the goods. 2. Consult the specific trade agreement's text or the importing country's tariff schedule to see if the code is listed with a preferential rate. 3. Obtain a valid Certificate of Origin from the exporter that meets the requirements of the specific trade agreement. For EU imports, the TARIC database is an essential tool for checking preferential rates and origin requirements.