HS 701020 Stoppers, lids and other closures
Quick Answer: Stoppers, lids, and other closures for containers imported under HS 701020 enter the UK duty-free, the EU at 5.00% ad valorem, and the US with rates varying from free to 25% ad valorem depending on the country of origin. This classification covers a range of items designed to seal or close containers, typically made of glass, but can also include materials like plastic or metal if they function as closures for glass containers. Importers should verify specific origin-based duty rates for the US market. According to CustomTariffs data, understanding these varied rates is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7010200000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7010200000 | 5.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 701020 | — | — | — |
| 7010202000 | 2.5% | Free (17 programs) | ["gross"] |
| 7010203000 | 5.2% | Free (17 programs) | ["gross"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7010.20?
Imports of Stoppers, lids and other closures may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 701020 cover?
This subheading covers stoppers, lids, and other closures specifically designed for containers, primarily made of glass. According to the World Customs Organization's Harmonized System Nomenclature, this category includes items like glass stoppers for bottles, glass lids for jars, and other sealing devices of glass intended to close or seal receptacles. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these are closures for containers, not the containers themselves, and are typically characterized by their function of sealing or closing.
What falls outside HS 701020?
The following products are excluded from HS 701020: glass containers themselves, such as bottles and jars (classified under HS 701010 for carboys, bottles, flasks, jars, pots, etc., of glass, of a kind used for the conveyance or packing of goods), and any closures made from materials other than glass, such as plastic caps or metal lids. Furthermore, decorative glass items or glass components that are not primarily intended as closures for containers are also classified elsewhere, often under Chapter 70's provisions for other glass articles.
What are common classification mistakes for HS 701020?
A common error is misclassifying glass containers that have integrated stoppers or lids as closures, or vice versa. General Rule of Interpretation (GRI) 3(b) for the interpretation of the Harmonized System states that mixtures, composite goods consisting of different materials or made up of different components, shall be treated as if they consisted of the material or component which gives them their essential character, which can lead to confusion if the closure is integral to the container's function and value.
How should importers classify products under HS 701020?
The correct procedure for classifying products under HS 701020 involves a thorough examination of the item's material and intended function. Importers and customs brokers must confirm the product is made of glass and its sole purpose is to act as a stopper, lid, or closure for a container. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and referencing explanatory notes from the WCO is crucial for accurate classification.
How is the duty calculated for products under HS 701020?
A set of 100 glass stoppers for wine bottles, each weighing approximately 50 grams, with a declared customs value of $25.00 USD, would attract a US duty of $2.50. This is calculated using the Most Favored Nation (MFN) rate of 10% ad valorem, applied to the declared value ($25.00 USD × 10% = $2.50). This calculation is based on the USITC Harmonized Tariff Schedule, where such glass closures are typically dutiable based on value.
Which trade agreements reduce duties for HS 701020?
Several free trade agreements may reduce the applicable duty rate for HS 701020, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying goods originating from Mexico or Canada. Additionally, agreements with developing countries under the Generalized System of Preferences (GSP) may offer reduced or Free duty rates. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and importing country's requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the primary classification criteria for HS code 701020 (Stoppers, lids and other closures)?
HS code 701020 covers stoppers, lids, and other closures, specifically those made of glass. The key criterion is that the item must be designed to close or seal an opening, typically on a container such as a bottle or jar. The material must be glass, excluding plastic or metal closures which fall under different headings. For example, a glass stopper for a wine bottle or a glass lid for a preserve jar would generally be classified here, provided they are not further specified or ornamented in a way that would place them in a more specific heading.
What are the typical import duty rates for HS code 701020, and how do preferential trade agreements affect them?
The Most Favored Nation (MFN) duty rate for HS code 701020 can vary by country. For instance, the United States applies a 3.5% ad valorem duty. However, many preferential trade agreements offer reduced or free entry. For example, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada and Mexico may have a 0% duty rate. Similarly, agreements with countries like Australia (AU), South Korea (KR), and Singapore (SG) often provide duty-free access. Importers must verify the origin of the goods and consult the specific tariff schedule of the importing country, such as the USITC Harmonized Tariff Schedule or the EU TARIC database, to determine applicable rates and any specific rules of origin.
How is the import duty for glass stoppers (HS 701020) calculated, and can you provide an example?
The import duty for HS code 701020 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 3.5% and you import glass stoppers valued at $10,000 USD, the duty would be calculated as: $10,000 (Value) × 0.035 (Duty Rate) = $350 USD. If a specific duty is applied (e.g., per unit), the calculation would be Rate per Unit × Number of Units. Always confirm the basis of duty assessment (ad valorem, specific, or compound) with the importing country's customs authority.
What documentation is typically required when importing goods classified under HS code 701020?
When importing glass stoppers, lids, and other closures under HS code 701020, standard import documentation is generally required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill for transportation. Crucially, for preferential duty rates, a Certificate of Origin or a declaration of origin compliant with the relevant Free Trade Agreement (FTA) is essential to prove that the goods meet the origin requirements. Importers should also be prepared for potential requests for product samples or further information to verify classification and origin.
Are there any specific exclusions or nuances within HS code 701020 that importers should be aware of?
Yes, HS code 701020 is specific to glass closures. Items made from other materials, such as plastic lids (typically HS 3923.50) or metal caps (often HS 8309), are excluded and classified elsewhere. Furthermore, if the glass closure is part of a more complete article, or if it is highly ornamented or designed for a specific luxury item where the closure itself is a significant feature (e.g., a crystal stopper for a decanter that is itself a work of art), it might be classified differently. Always ensure the item is solely a closure and made of glass to correctly apply this code. Consult the Explanatory Notes to the Harmonized System for detailed guidance.