HS 700330 Profiles
Quick Answer: Profiles of glass imported under HS 700330 enter the UK at 0.00%, the EU at 3.00% ad valorem, and the US at rates ranging from 6.3% to 60% ad valorem, with duty-free entry for certain preferential trade partners. This classification specifically covers shaped glass, such as that used for window frames or structural elements, which has been worked into a profile form. Importers should be aware of the significant duty rate variations between major markets. According to CustomTariffs data, understanding these differences is crucial for accurate landed cost calculations and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7003300000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7003300000 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 7003300000 | 6.3% | Free (18 programs) | ["m<sup>2</sup>"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 7003.30?
Imports of Profiles may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 700330 cover?
This subheading covers glass cast in the form of profiles, which are elongated pieces of glass with a continuous cross-sectional shape, typically used in construction or manufacturing. According to the World Customs Organization's Harmonized System Nomenclature, this category specifically includes glass that has been shaped during the manufacturing process into specific forms like frames, mullions, or other structural elements, as distinguished from flat glass or glass in primary forms. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, focusing on the extruded or drawn shape as the defining characteristic.
What falls outside HS 700330?
The following products are excluded from HS 700330: flat glass of heading 7003, glass in balls, rods, tubes, or hollow profiles (heading 7004 or 7005), and finished articles of glass such as window frames or doors, which are classified under headings specific to those finished goods. For instance, pre-fabricated window units incorporating glass profiles would likely fall under Chapter 94 or Chapter 84, depending on their specific function and construction, rather than the raw glass profile itself.
What are common classification mistakes for HS 700330?
A common error is misclassifying finished or semi-finished glass products as raw profiles. For example, glass that has undergone further processing, such as cutting to specific lengths for a particular window assembly, or glass that has been laminated or tempered, might be incorrectly entered under 700330. General Rule of Interpretation (GRI) 1 and GRI 3(b) are crucial here; the classification should reflect the essential character of the good, and if it's a composite good, it should be classified according to its essential character or by analogy to similar finished products.
How should importers classify products under HS 700330?
The correct procedure for classifying products under HS 700330 involves a thorough examination of the product's physical characteristics and intended use. Importers and customs brokers must verify that the glass is indeed cast or extruded into a continuous profile shape and has not undergone significant further fabrication. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and referencing explanatory notes from the WCO is essential to confirm the product's precise classification.
How is the duty calculated for products under HS 700330?
A shipment of 1,000 kilograms of colored glass profiles for architectural use, declared at a customs value of $5,000 USD, would attract a US duty of $350.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.00% ad valorem, applied to the declared customs value ($5,000 USD × 0.07 = $350.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule, under subheading 7003.30.0000.
Which trade agreements reduce duties for HS 700330?
Several free trade agreements may reduce the applicable duty rate for HS 700330, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. Additionally, the Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible goods from designated developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific requirements of the importing jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 700330 (Profiles of glass)?
The Most Favored Nation (MFN) duty rate for HS code 700330 is 3.00% ad valorem. However, preferential duty rates are available for imports from certain countries under various trade agreements. For example, imports from Australia (AU), Canada (CA), Chile (CL), and Singapore (SG) may be eligible for duty-free entry (0.00%). It is crucial to verify the specific preferential rate applicable to your origin country using the relevant customs tariff database, such as the US Harmonized Tariff Schedule (HTS) or the EU's TARIC system.
What specific criteria define 'profiles' under HS code 700330?
Under HS code 700330, 'profiles' refer to glass that has been shaped into a specific cross-sectional form, typically elongated, and is intended for use in construction or other applications where its shape is integral to its function. This includes items like U-shaped glass, L-shaped glass, or other extruded or formed glass sections. It is distinct from flat glass (7003) or glass in primary forms. The defining characteristic is the permanent shaping of the glass into a profile, not merely cutting it to size.
How is the import duty for HS code 700330 calculated, and can you provide an example?
The import duty for HS code 700330 is typically calculated on an ad valorem basis, meaning it is a percentage of the declared customs value of the goods. For instance, if the MFN duty rate is 3.00% and you import glass profiles valued at $10,000 USD, the duty would be calculated as: $10,000 (Value) × 3.00% (Duty Rate) = $300 USD. If a specific duty rate (e.g., per unit) applies, the calculation would be rate per unit × quantity. Always confirm the applicable duty basis (ad valorem, specific, or compound) with the official tariff schedule.
What documentation is typically required for importing glass profiles under HS code 700330?
Standard documentation for importing glass profiles (HS 700330) includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; a bill of lading or air waybill; and a certificate of origin if preferential duty rates are claimed. Depending on the importing country and the specific product, additional certifications related to safety standards, quality, or origin may be required. Importers and customs brokers should consult the importing country's customs authority for a comprehensive list.
Which common trade agreements offer preferential duty rates for HS code 700330?
Several trade agreements can provide preferential duty rates for HS code 700330. For example, the United States has agreements like the USMCA (formerly NAFTA) which may offer reduced or zero duties for goods originating from Canada and Mexico. The EU has numerous Free Trade Agreements (FTAs) with countries like Switzerland, Norway, and South Korea, potentially leading to lower duties. The UK has its own set of FTAs post-Brexit. The provided sample rates indicate potential benefits from agreements with countries such as Australia (AU), Chile (CL), and Singapore (SG). It is essential to consult the specific text of each trade agreement and the relevant customs tariff database (e.g., EU TARIC, UK Trade Tariff) to confirm eligibility and applicable rates.