HS 551329 Other woven fabrics

Quick Answer: Woven fabrics of synthetic staple fibres, not exceeding 85% by weight of polyester, other than those of heading 5513.11, 5513.12, 5513.13, or 5513.21, imported under HS 551329 enter the UK at 8.00%, the EU at 8.00%, and the US with rates varying significantly from 0% (under Free Trade Agreements) to 81% under the Most Favoured Nation (MFN) tariff. This classification generally covers woven fabrics made from synthetic staple fibres, such as polyester or nylon, that are not primarily composed of polyester and do not fall into more specific subheadings. Importers should verify specific MFN and preferential duty rates for the US, as well as any potential anti-dumping or countervailing duties. CustomTariffs aggregates this data, highlighting the importance of precise classification and origin for accurate duty assessment.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
5513290000 8.00 %

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
5513290000 8.00 %

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
55132900 14.9% Free (14 programs)
5513290020 ["m²","kg"]
5513290030 ["m²","kg"]
5513290040 ["m²","kg"]
5513290060 ["m²","kg"]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 5513.29?

Imports of Other woven fabrics may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, and 12 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How Has Trade Volume Developed?

Trade Volume 2023

US$246.1K
ImportsExports

How to Classify This HS Code?

```html

What products does HS 551329 cover?

This subheading covers other woven fabrics of synthetic staple fibres, not exceeding 85% by weight of synthetic staple fibres, of a weight not exceeding 170 g/m², not containing significant quantities of rubber threads or cords, and not being pile fabrics or chenille fabrics. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category is distinct from those specified in subheadings 5513.11 to 5513.21, which detail specific fibre compositions or weights. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database further refine these definitions, emphasizing the exclusion of fabrics with a weight exceeding 170 g/m² or those containing more than 15% by weight of synthetic staple fibres.

What falls outside HS 551329?

The following products are excluded from HS 551329: fabrics of synthetic staple fibres exceeding 170 g/m², fabrics predominantly composed of synthetic staple fibres (over 85% by weight), fabrics containing rubber threads or cords in significant quantities, pile fabrics, and chenille fabrics. For instance, a woven fabric of polyester staple fibre weighing 200 g/m² would be classified under a different heading, likely 5512. Similarly, a fabric with 20% elastane and 80% polyester staple fibre would not fall under this subheading. Fabrics of artificial staple fibres are also excluded.

What are common classification mistakes for HS 551329?

A common error is misinterpreting the weight limitations and fibre composition percentages. Importers may incorrectly classify fabrics exceeding 170 g/m² or those with a higher percentage of synthetic staple fibres than permitted under this subheading. For example, a fabric that is 90% polyester staple fibre and 10% cotton, weighing 180 g/m², would not be classified here. Adherence to General Interpretative Rule 1 and Rule 3(b) of the Harmonized System is crucial, ensuring the primary characteristic of the fabric dictates its classification, especially when mixed fibres are present.

How should importers classify products under HS 551329?

The correct procedure for classifying products under HS 551329 involves a multi-step process. First, determine the fibre composition by weight, ensuring synthetic staple fibres do not exceed 85% by weight. Second, verify the fabric's weight per square meter, confirming it does not exceed 170 g/m². Third, confirm the fabric is not a pile fabric, chenille fabric, or does not contain significant quantities of rubber threads. Consulting official tariff schedules like the USITC HTS or EU TARIC and potentially seeking a binding ruling from customs authorities is recommended for complex cases.

How is the duty calculated for products under HS 551329?

A bolt of woven fabric, composed of 70% polyester staple fibre and 30% cotton, weighing 150 g/m², declared at a customs value of $500 USD, would attract a US duty of $35.00 (7% × $500). This is calculated using the Most Favored Nation (MFN) rate of 7% ad valorem published in the USITC Harmonized Tariff Schedule for subheading 5513.29.0000. The calculation is based on the declared customs value of the imported goods, as per the ad valorem duty assessment method.

Which trade agreements reduce duties for HS 551329?

Several free trade agreements may reduce the applicable duty rate for HS 551329, including the United States-Mexico-Canada Agreement (USMCA), which can result in a Free duty rate for qualifying goods originating from Canada or Mexico. The Generalized System of Preferences (GSP) may offer reduced or Free duty rates for eligible products from developing countries, such as Bangladesh or Vietnam. To claim these preferences, a valid USMCA Certificate of Origin or a GSP Form A, respectively, is typically required, depending on the specific origin and destination country.

```

Which HS Codes Are Related?

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the typical import duty rates for HS code 5513.29, covering 'Other woven fabrics of synthetic staple fibres'?

The Most Favored Nation (MFN) duty rate for HS code 5513.29 can vary significantly by importing country. For instance, the U.S. tariff rate is 8.00% ad valorem. In the European Union, under the TARIC system, the rate is often around 8.00% ad valorem, though specific rates can be subject to anti-dumping duties or other measures. The UK Trade Tariff also shows a standard rate of 8.00% ad valorem. It is crucial to consult the specific tariff schedule of the destination country for the most accurate and up-to-date rates.

How are preferential duty rates applied to HS code 5513.29 under various trade agreements?

Preferential duty rates for HS code 5513.29 are available for goods originating from countries that are signatories to specific trade agreements. For example, under the USMCA (United States-Mexico-Canada Agreement), fabrics meeting the rules of origin may enter duty-free. Similarly, agreements like the Free Trade Agreement between the US and South Korea (KORUS FTA) or the EU's Economic Partnership Agreements (EPAs) can reduce or eliminate duties. Importers must possess a valid Certificate of Origin and ensure the goods meet the product-specific rules of origin outlined in the respective trade agreement to claim preferential treatment.

What are the key classification criteria to ensure a fabric is correctly classified under HS code 5513.29?

HS code 5513.29 covers 'Other woven fabrics of synthetic staple fibres, weighing not more than 170 g/m², of yarns of different colours'. The primary classification criteria include: 1) The material composition: The fabric must be made predominantly (by weight) of synthetic staple fibres (e.g., polyester, nylon, acrylic staple). 2) Weave type: It must be a woven fabric (not knitted, crocheted, felted, etc.). 3) Weight: The fabric's weight must not exceed 170 grams per square meter (g/m²). 4) Yarn color: The yarns used must be of different colors. If the fabric is predominantly of one color or printed, it may fall under a different subheading. Verification of these attributes against the fabric's technical specifications is essential.

Can you provide a concrete example of how import duty is calculated for HS code 5513.29?

Certainly. Suppose an importer brings 1,000 kilograms of fabric classified under HS code 5513.29 into the United States, with a declared value of $5,000 USD. The MFN duty rate is 8.00% ad valorem. The duty calculation would be: Duty = Declared Value × Duty Rate. Duty = $5,000 USD × 8.00% = $400 USD. In this scenario, the importer would owe $400 in duties. If the tariff were based on a specific duty (e.g., per kg), the calculation would be Rate per Unit × Quantity.

What documentation is typically required when importing goods under HS code 5513.29?

Standard documentation for importing fabrics under HS code 5513.29 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list specifying the contents of each package; a bill of lading or air waybill as the transport document; and a certificate of origin, especially if claiming preferential duty rates. Depending on the importing country and the specific fabric, additional documents such as a textile declaration, laboratory test reports confirming fiber content, or compliance certificates might be required. Importers and customs brokers should always verify the specific requirements with the customs authority of the destination country.