HS 550290 Other
Quick Answer: Artificial filament tow and yarn, not put up for retail sale, other than those of synthetic fibres, imported under HS 550290 enters the UK at 0.00%, the EU at 4.00% ad valorem, and the US at 7.5% ad valorem, with preferential rates available for certain trade partners. This residual classification applies to filament tow and yarn of artificial fibres not specifically covered elsewhere. Importers should verify the specific origin and applicable preferential rates to ensure accurate duty assessment. CustomTariffs aggregates this data for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5502900000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5502900000 | 4.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5502900000 | 7.5% | Free (14 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 5502.90?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 12 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 550290 cover?
This subheading covers "Other" artificial filament, tow, and yarn of synthetic fibres, not elsewhere specified within heading 5502. According to the World Customs Organization (WCO) Harmonized System Nomenclature, heading 5502 encompasses artificial filament, tow and yarn. Subheading 5502.90 specifically captures those not falling under 5502.10 (yarn of artificial filament) or 5502.90 (tow and yarn of artificial staple fibres). This includes, for example, certain types of continuous filament yarn of synthetic fibres that do not meet the specific criteria for other subheadings, as detailed in the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database.
What falls outside HS 550290?
The following products are excluded from HS 550290: artificial filament, tow, and yarn of artificial filament that are specifically classified under other subheadings within heading 5502, such as yarn of artificial filament (5502.10) or tow and yarn of artificial staple fibres (5502.90). Additionally, products made from natural fibres, regenerated cellulose fibres, or synthetic staple fibres that are not in the form of filament, tow, or yarn would be classified elsewhere. For instance, woven fabrics of synthetic filament yarn are classified under Chapter 54, not Chapter 55.
What are common classification mistakes for HS 550290?
A common error is misinterpreting the distinction between "artificial filament" and "synthetic staple fibres" or failing to correctly identify whether the material is in the form of filament, tow, or yarn. General Interpretative Rule 1 (GIR 1) of the Harmonized System emphasizes that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. Importers may incorrectly classify finished textile articles or materials that are not continuous filament, tow, or yarn under this subheading, leading to incorrect duty assessments.
How should importers classify products under HS 550290?
The correct procedure for classifying products under HS 550290 involves a thorough examination of the product's material composition and physical form. Importers and customs brokers must first determine if the product is an artificial filament, tow, or yarn of synthetic fibres. They should then consult the WCO HS Explanatory Notes and the specific national tariff schedules, such as the USITC HTS or the UK Trade Tariff, to ensure it does not meet the criteria for more specific subheadings within heading 5502. A detailed product description, including denier, tenacity, and intended use, is crucial for accurate classification.
How is the duty calculated for products under HS 550290?
A shipment of 1,000 kilograms of undyed, continuous filament yarn of polyester, not put up for retail sale, declared at a customs value of $5,000 USD, would attract a US duty of $150.00. This is calculated using the Most Favored Nation (MFN) duty rate of 3.0% ad valorem, applied to the customs value: 3.0% × $5,000 USD = $150.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule (HTS) for subheading 5502.90.90, which covers other synthetic filament yarn.
Which trade agreements reduce duties for HS 550290?
Several free trade agreements may reduce the applicable duty rate for HS 550290, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods may receive a duty rate of Free. For example, yarn of polyester originating from Canada or Mexico could benefit from this preferential rate. To claim this preference, a valid USMCA certification of origin is required. Additionally, the Generalized System of Preferences (GSP) may offer reduced or free entry for eligible goods from developing countries, requiring a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 550290, and how do preferential rates apply?
HS code 550290, covering 'Other' artificial filament, falls under Chapter 55 of the Harmonized System. The Most Favored Nation (MFN) duty rate is typically 4.00% ad valorem. However, numerous preferential rates exist under various trade agreements. For example, goods originating from Australia (AU), Bahrain (BH), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Peru (PE), Singapore (SG), and others may receive duty-free treatment (Free). It is crucial to consult the specific tariff schedule of the importing country and verify the rules of origin to claim preferential treatment. For instance, the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database provide detailed rate information.
What specific criteria determine if a product falls under HS code 550290 ('Other')?
HS code 550290 is a residual category for artificial filaments that are not specifically classified under other headings within Chapter 55. This typically includes artificial filaments made from cellulose esters or other artificial polymers, which do not meet the criteria for headings like 5501 (tow of synthetic filaments) or 5502 (artificial filament yarn). Classification relies on the material composition and the form of the product. If a filament is not specifically covered by a more precise HS code, it will likely be classified here. Importers should carefully review the Chapter Notes and Section Notes of the Harmonized System, as well as explanatory notes from organizations like the WCO, to ensure correct classification.
What documentation is typically required for importing goods classified under HS code 550290?
Standard import documentation for HS code 550290 includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the country of origin and destination, a certificate of origin may be required, especially if preferential duty rates are being claimed under a trade agreement. For artificial filaments, specific product information regarding the material composition (e.g., cellulose acetate, rayon, or other synthetic polymers) might be necessary for customs authorities to verify classification. Compliance with any specific import regulations or standards of the destination country for textile or chemical products is also essential.
How is the import duty for HS code 550290 calculated, and can you provide an example?
The import duty for HS code 550290 is typically calculated on an ad valorem basis, meaning it is a percentage of the value of the imported goods. For example, if the standard MFN duty rate is 4.00% and you import 1,000 kilograms of artificial filament valued at $5,000 USD, the duty calculation would be: Duty Amount = Value of Goods × Duty Rate. In this case, Duty Amount = $5,000 × 4.00% = $200. Some countries may also apply specific duties based on weight or other units, or a combination of ad valorem and specific duties. Always verify the applicable duty calculation method and rates in the destination country's tariff schedule.
Which major trade agreements commonly offer preferential duty rates for HS code 550290?
Several major trade agreements provide preferential duty rates, often including duty-free entry, for goods classified under HS code 550290. Examples include the United States-Mexico-Canada Agreement (USMCA), agreements between the EU and various countries (e.g., EU-Korea Free Trade Agreement), and bilateral agreements such as those between the US and countries like Chile, Singapore, and South Korea. The specific benefits and requirements (like rules of origin) vary significantly by agreement. Importers and customs brokers must consult the relevant trade agreement text and the customs authority's guidelines for the importing country to determine eligibility and claim preferential treatment.