HS 520622 Measuring less than 714,29 decitex but not less than 232,56 decitex (exceeding 14 metric number but not exceeding 43 metric number)
Quick Answer: Cotton yarn, measuring less than 714.29 decitex but not less than 232.56 decitex (exceeding 14 metric number but not exceeding 43 metric number), enters the UK at 0.00%, the EU at 4.00% ad valorem, and the US with a range of rates including Free for certain trade agreements, 40%, and 9.2% ad valorem. This classification specifically applies to single, unbleached cotton yarns of this specified fineness. Importers should be aware of the varying duty rates across major markets, with preferential trade agreements significantly impacting US entry costs. CustomTariffs aggregates this data, highlighting the importance of verifying specific origin-based rates for accurate landed cost calculations.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5206220000 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5206220000 | 4.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 5206220000 | 9.2% | Free (14 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 5206.22?
Imports of Measuring less than 714,29 decitex but not less than 232,56 decitex (exceeding 14 metric number but not exceeding 43 metric number) may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 12 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 520622 cover?
This subheading covers single, unbleached or bleached cotton sewing thread, not put up for retail sale, that is made from cotton fibers and has a linear density measuring less than 714,29 decitex but not less than 232,56 decitex. This range corresponds to a metric number exceeding 14 but not exceeding 43, as defined by the World Customs Organization's Harmonized System Nomenclature. Official definitions from sources like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this specific decitex range for classification.
What falls outside HS 520622?
The following products are excluded from HS 520622: cotton sewing thread with a linear density outside the specified range (either finer than 232,56 decitex or coarser than 714,29 decitex), cotton sewing thread put up for retail sale (which falls under HS 5207), sewing thread made from synthetic or artificial fibers, and sewing thread made from cotton blends where cotton is not the predominant fiber by weight. For instance, a 100% cotton sewing thread with a decitex of 200 would be classified elsewhere.
What are common classification mistakes for HS 520622?
A common error is miscalculating or misinterpreting the linear density (decitex) or the corresponding metric number. Importers may incorrectly assume a thread's fineness based on its appearance rather than precise measurement. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the headings and any relative section or chapter notes. Failing to accurately measure the decitex, which is a critical quantitative criterion, can lead to misclassification under a more general or incorrect specific subheading.
How should importers classify products under HS 520622?
The correct procedure for classifying sewing thread under HS 520622 involves first confirming that the product is 100% cotton and is not put up for retail sale. Subsequently, the linear density of the thread must be precisely measured in decitex. This measurement must fall within the range of 232,56 to less than 714,29 decitex. Importers and customs brokers should consult official measurement standards and, if necessary, obtain laboratory analysis to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 520622?
A 100% cotton sewing thread, unbleached, weighing 500 kilograms and declared at a customs value of $2,500 USD, would attract a US duty of $350.00. This is calculated using the Most Favored Nation (MFN) duty rate of 7.0% ad valorem applied to the declared value ($2,500 USD × 0.07 = $175.00) plus a specific duty of $0.10 per kilogram ($0.10/kg × 500 kg = $50.00), resulting in a total duty of $225.00. This calculation is based on the rates published in the USITC Harmonized Tariff Schedule for HS code 5206.22.0000.
Which trade agreements reduce duties for HS 520622?
Several free trade agreements may reduce the applicable duty rate for HS 520622, including the United States-Mexico-Canada Agreement (USMCA), which can provide duty-free entry for qualifying goods originating from Canada or Mexico. The Generalized System of Preferences (GSP) may also offer reduced or free entry for goods from certain developing countries, such as Bangladesh. To claim these preferences, a valid Certificate of Origin or a self-certified origin statement, as per the specific agreement's requirements, is typically mandated.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 520622, which covers cotton yarn (multiple threads or cabled) of synthetic staple fibres, measuring less than 714,29 decitex but not less than 232,56 decitex?
The Most Favored Nation (MFN) duty rate for HS code 520622 is typically 4.00% ad valorem. However, preferential duty rates may apply for imports from countries with which the importing country has trade agreements. For example, under specific agreements, goods may enter duty-free (e.g., Free (AU,BH,CL,CO,IL,JO,KR,MA,OM,P,PA,PE,S,SG)). Always consult the specific tariff schedule of the importing country for the most accurate and up-to-date rates applicable to your origin country.
How is the decitex measurement for HS code 520622 determined, and what is the significance of 'less than 714,29 decitex but not less than 232,56 decitex'?
Decitex (dtex) is a unit of linear mass density for textile fibres. It measures the mass in grams per 10,000 meters of yarn. For HS code 520622, the yarn must fall within a specific range: its linear density must be greater than or equal to 232.56 dtex and less than 714.29 dtex. This range corresponds to yarn counts exceeding 14 metric number but not exceeding 43 metric number. This precise measurement is crucial for correct classification and avoiding penalties.
What documentation is typically required when importing goods classified under HS code 520622?
Standard import documentation for HS code 520622 includes a commercial invoice, packing list, and bill of lading or air waybill. Crucially, a certificate of origin may be required to claim preferential tariff treatment under trade agreements. Depending on the importing country and the specific nature of the cotton yarn, additional certifications related to quality standards or fiber content might be requested by customs authorities.
Which common trade agreements often provide preferential duty rates for HS code 520622, and how can importers verify eligibility?
Many trade agreements offer reduced or zero duty rates for goods like cotton yarn. Examples include agreements like the USMCA (United States-Mexico-Canada Agreement), EU trade agreements with partner countries, and various bilateral agreements. To verify eligibility, importers must confirm that the yarn originates from a country that is a party to an applicable trade agreement and that the yarn meets the rules of origin stipulated in that agreement. This often requires a valid Certificate of Origin.
Can you provide a concrete example of how import duty is calculated for HS code 520622, assuming a 4.00% MFN duty rate?
Certainly. If you import 1,000 kilograms of cotton yarn classified under HS code 520622 with an invoice value of $5,000 USD, and the applicable MFN duty rate is 4.00% ad valorem, the duty calculation would be as follows: Duty Amount = Invoice Value × Duty Rate. In this case, Duty Amount = $5,000 USD × 4.00% = $200 USD. This is a simplified example; other charges like customs fees or specific duties might also apply.