HS 441883 I beams
Quick Answer: I-beams imported under HS 441883 enter the UK duty-free, the EU duty-free, and the US at 3.2% ad valorem under the Most Favored Nation (MFN) rate, with certain trade agreements providing duty-free entry. This HS code specifically covers laminated wood beams, often referred to as I-joists, which are structural components used in construction. These are distinct from solid timber beams and are characterized by their I-shaped cross-section, typically with flanges made of solid lumber or engineered wood and a web made of plywood or oriented strand board (OSB). Importers should verify specific origin-based duty rates, as preferential agreements can significantly alter the landed cost. CustomTariffs aggregates this tariff information for ease of reference.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4418830000 | 0.00 % | — | — |
| 4418830010 | 0.00 % | — | — |
| 4418830090 | 0.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4418830000 | 0.00 % | — | — |
| 4418830010 | 0.00 % | — | — |
| 4418830090 | 0.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4418830000 | 3.2% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4418.83?
Imports of I beams may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 441883 cover?
This subheading covers laminated wood beams, specifically those with a rectangular or square cross-section, designed for structural purposes, commonly known as "I beams." According to the World Customs Organization (WCO) Harmonized System Nomenclature, this classification applies to composite wood members made by bonding together wood laminations, which are shaped to form an I-beam profile. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm that these engineered wood products are intended for construction and are characterized by their web and flange components, providing high strength-to-weight ratios.
What falls outside HS 441883?
The following products are excluded from HS 441883: solid wood beams that have not undergone lamination or shaping into an I-beam profile, even if intended for structural use. Also excluded are composite beams made from materials other than wood laminations, such as steel or concrete. Furthermore, wood products that are not specifically shaped as I-beams, like simple rectangular lumber or plywood, are classified under different headings within Chapter 44. Finished or semi-finished building components with integrated I-beam elements that are not solely laminated wood I-beams are also typically classified elsewhere.
What are common classification mistakes for HS 441883?
A common error is misclassifying laminated wood products that do not conform to the specific "I beam" profile under this subheading. For instance, solid timber beams, even if structurally sound, do not meet the criteria for HS 441883. Another mistake involves classifying composite beams made of mixed materials, such as wood and steel, under this code, when they should be classified based on their predominant material or as a composite article under a more appropriate heading. Adherence to General Interpretative Rule 1 and Rule 3(b) is crucial for correct classification.
How should importers classify products under HS 441883?
The correct procedure for classifying products under HS 441883 involves a thorough examination of the product's construction and intended use. Importers and customs brokers must verify that the product is indeed a laminated wood beam with an I-beam cross-section, as defined by the WCO and national tariff schedules. This requires reviewing product specifications, technical drawings, and manufacturing processes. Consulting the official tariff schedules of the importing country, such as the USITC HTS or the UK Trade Tariff, and cross-referencing with the WCO Explanatory Notes is essential for accurate determination.
How is the duty calculated for products under HS 441883?
A laminated Douglas Fir I-beam weighing 500 kg and declared at a customs value of $1,500 USD would attract a US duty of $75.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem (5.0% × $1,500 USD = $75.00). This calculation is based on the rate published in the USITC Harmonized Tariff Schedule for HS code 4418.83.0000. Note that specific product details and origin can influence the final duty assessment.
Which trade agreements reduce duties for HS 441883?
Several free trade agreements may reduce the applicable duty rate for HS 441883, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying laminated wood I-beams originating from Canada or Mexico can enter the United States duty-free. To claim this preference, a self-certified origin statement on the commercial invoice or a separate declaration is typically required. While not directly applicable to this specific product, other agreements like the EU-UK Trade and Cooperation Agreement might offer preferential rates for similar wood products originating from the EU or UK into their respective markets, often requiring an EUR.1 movement certificate.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the import duty rates for HS code 441883 (I beams)?
The import duty rates for HS code 441883, covering I beams of wood, vary significantly by country. For example, the United States applies a Most Favored Nation (MFN) duty rate of 3.2% ad valorem. The European Union, under TARIC, may have different rates depending on the origin, often including preferential rates. The United Kingdom's Trade Tariff also lists specific rates, which can include 'Free' for certain trade agreement partners. It is crucial to consult the specific tariff schedule of the importing country for the applicable duty rate.
How are I beams classified under HS code 441883?
HS code 441883 specifically covers 'I beams' of wood. Classification hinges on the product's shape and material. The 'I beam' designation implies a structural profile with two parallel flanges connected by a web, resembling the letter 'I'. These must be made of wood, typically laminated wood or glulam (glue-laminated timber), intended for construction or structural purposes. Products that do not conform to this specific 'I' shape or are made from materials other than wood would be classified under different HS codes.
What documentation is typically required for importing I beams under HS 441883?
When importing I beams classified under HS 441883, standard import documentation is required. This includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the importing country and the origin of the goods, a certificate of origin may be necessary to claim preferential duty rates under trade agreements. For wood products, phytosanitary certificates or other declarations related to timber legality and pest control might also be mandated by the importing country's agricultural or forestry authorities.
Which common trade agreements offer preferential duty rates for HS 441883?
Several trade agreements can provide preferential duty rates for I beams (HS 441883). For instance, agreements like the USMCA (United States-Mexico-Canada Agreement) may offer reduced or zero duties between member countries. The EU's Economic Partnership Agreements (EPAs) with various African, Caribbean, and Pacific countries, as well as its Free Trade Agreements (FTAs) with nations like Canada (CETA) or Japan, can also reduce tariffs. The UK has numerous FTAs post-Brexit, mirroring many EU agreements. Importers should verify if their goods originate from a country that is a party to an active trade agreement with the destination country to benefit from these preferential rates.
How is the import duty for I beams calculated? Provide an example.
The import duty for I beams under HS 441883 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For example, if the United States applies a 3.2% ad valorem duty rate on I beams (HS 441883) and an importer declares a shipment valued at $10,000 USD, the duty calculation would be: $10,000 (Value) × 0.032 (Duty Rate) = $320 USD. In some cases, duties might be based on a combination of value and quantity (e.g., per cubic meter), but for this specific code in many major markets, ad valorem is common. Always confirm the exact basis of duty calculation with the importing country's customs authority.