HS 441193 Of a density exceeding 0,5 g/cm3 but not exceeding 0,8 g/cm3
Quick Answer: Wood particle board, fibreboard, and similar board of wood, of a density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³, imported under HS 441193 enters the UK at 6.00%, the EU at 7.00%, and the US with rates varying significantly from 30% ad valorem to free, depending on specific product characteristics and origin. This classification pertains to medium-density fibreboard (MDF) and particleboard within a defined density range, commonly used in furniture and construction. Importers should consult specific tariff schedules for precise US duty rates, as these can differ substantially. According to CustomTariffs data, understanding these varied rates is crucial for accurate landed cost calculations.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4411930000 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4411930000 | 7.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4411939010 | — | — | ["m<sup>3</sup>"] |
| 4411931000 | Free | — | ["m<sup>3</sup>"] |
| 441193 | — | — | — |
| 4411933000 | Free | — | ["m<sup>3</sup>"] |
| 44119390 | 3.9% | Free (17 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4411.93?
Imports of Of a density exceeding 0,5 g/cm3 but not exceeding 0,8 g/cm3 may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How to Classify This HS Code?
What products does HS 441193 cover?
This subheading covers fibreboard of wood or other ligneous materials, of a density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this category specifically includes medium-density fibreboard (MDF) and similar wood-based panels that fall within this precise density range. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, focusing on the material's composition and its physical density as the primary classification criteria, excluding materials with significantly higher or lower densities.
What falls outside HS 441193?
The following products are excluded from HS 441193: fibreboard with a density not exceeding 0.5 g/cm³ (classified under 4411.11 to 4411.12) or exceeding 0.8 g/cm³ (classified under 4411.94). Also excluded are particle board (Chapter 44, heading 4412), plywood (Chapter 44, heading 4412), and composite wood materials where wood is not the sole or principal constituent. For instance, panels with a significant plastic or metal component would be classified elsewhere, and solid wood lumber is not covered by this heading.
What are common classification mistakes for HS 441193?
A common error is misinterpreting the density requirement, leading to classification under the wrong subheading within heading 4411. For example, classifying a fibreboard with a density of 0.45 g/cm³ under 441193 would be incorrect, as it should fall under a subheading for densities not exceeding 0.5 g/cm³. Another mistake involves confusing fibreboard with particle board or other composite wood products, which have different classification criteria and duty rates. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative section or chapter notes, is crucial.
How should importers classify products under HS 441193?
The correct procedure for classifying products under HS 441193 involves first identifying the material as fibreboard of wood or other ligneous materials. Subsequently, the importer or customs broker must accurately determine the product's density. This typically requires consulting the manufacturer's specifications or conducting independent testing. If the density is confirmed to be greater than 0.5 g/cm³ but not greater than 0.8 g/cm³, then HS 441193 is the appropriate classification. Verification against official tariff schedules like the USITC HTS or EU TARIC is essential for definitive classification.
How is the duty calculated for products under HS 441193?
A 100-sheet pack of medium-density fibreboard (MDF) measuring 12mm x 1220mm x 2440mm, weighing approximately 25 kg and declared at a customs value of $150 USD, would attract a US duty of $7.50. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem (5.0% of $150). This calculation is based on the MFN rate published in the USITC Harmonized Tariff Schedule (HTS) for subheading 4411.93.1000, which covers fibreboard of a density exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³.
Which trade agreements reduce duties for HS 441193?
Several free trade agreements may reduce the applicable duty rate for HS 441193, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, qualifying fibreboard originating from Canada or Mexico can enter the United States duty-free. For example, a shipment of qualifying MDF from Canada would have a preferential rate of Free. To claim this preference, a valid USMCA Certificate of Origin or a self-certified origin statement meeting specific requirements must be provided to customs authorities in the importing country.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 4411.93 (particle board, density > 0.5 g/cm³ but ≤ 0.8 g/cm³)?
Import duty rates for HS code 4411.93 vary significantly by importing country and trade agreement. For example, under the US Harmonized Tariff Schedule (HTS), the Most Favored Nation (MFN) duty rate is 3.2% ad valorem. Under the EU's Combined Nomenclature (CN), the autonomous tariff quota (ATQ) rate can be 0% or 2.7% ad valorem, depending on specific conditions and origin. The UK Global Tariff also lists rates, often around 4% ad valorem. It is crucial to consult the specific tariff schedule of the importing country for the definitive rate applicable to your shipment's origin.
How is the duty for HS 4411.93 calculated? Can you provide an example?
The duty for HS code 4411.93 is typically calculated on an ad valorem basis, meaning a percentage of the declared customs value of the goods. For instance, if particle board classified under 4411.93 has a declared customs value of $10,000 USD and the applicable MFN duty rate is 3.2%, the import duty would be $10,000 USD * 0.032 = $320 USD. Always ensure the customs value is determined according to the WTO Valuation Agreement or the importing country's specific valuation rules.
What are the key classification criteria for HS code 4411.93?
HS code 4411.93 specifically covers 'Particle board and similar board of wood or of other ligneous materials, whether or not agglomerated with resins or other organic binding substances' where the density is 'exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³'. Importers must ensure the product's actual measured density falls within this precise range. This is typically verified by the manufacturer's specifications or independent testing. Failure to meet this density criterion could lead to misclassification under a different subheading within 4411.
Which trade agreements commonly affect the duty rates for HS 4411.93?
Trade agreements significantly impact duty rates for HS 4411.93. For shipments into the United States, the USMCA (United States-Mexico-Canada Agreement) may offer preferential duty rates for goods originating from Canada or Mexico. For the European Union, agreements like the EUSingapore Free Trade Agreement or agreements with countries such as Switzerland or Norway can provide reduced or zero duty rates. Similarly, the UK has numerous Free Trade Agreements (FTAs) post-Brexit that could affect imports. Importers must verify the origin of their goods and consult the relevant preferential trade agreement schedules to claim applicable tariff reductions.
What documentation is typically required for importing goods under HS code 4411.93?
Standard documentation for importing goods under HS code 4411.93 includes a commercial invoice, packing list, and bill of lading or air waybill. Crucially, importers must provide proof of origin to claim preferential duty rates under trade agreements. This is often in the form of a Certificate of Origin or a statement of origin on the invoice, depending on the specific agreement. Additionally, a manufacturer's declaration or test report confirming the product's density (exceeding 0.5 g/cm³ but not exceeding 0.8 g/cm³) may be requested by customs authorities to substantiate the HS classification.