HS 430220 Heads, tails, paws and other pieces or cuttings, not assembled

Quick Answer: Heads, tails, paws, and other pieces or cuttings of hides and skins of animals, not assembled, imported under HS 430220 enter the UK and EU duty-free, while the United States applies a Most Favored Nation (MFN) rate of 2.1% with several preferential trade agreements offering duty-free entry. This classification specifically covers raw or simply prepared parts of furskins that are not yet fashioned into garments or other finished articles. Importers and customs brokers should be aware of the varying tariff treatments across major markets, particularly the significant preferential access to the US market for qualifying countries. CustomTariffs aggregates this data to assist in compliance.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
4302200000 0.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
4302200000 0.00 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
4302203000 2.1% Free (17 programs) ["kg"]
4302206000 3.5% Free (17 programs) ["kg"]
430220 — — —
4302209000 1.7% Free (17 programs) ["kg"]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 4302.20?

Imports of Heads, tails, paws and other pieces or cuttings, not assembled may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, GSP, and 14 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 430220 cover?

This subheading covers pieces and cuttings of hides and skins of animals, specifically those of heading 4302, which are not assembled into whole skins or parts thereof. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, this includes remnants, offcuts, and trimmings derived from the dressing or working of furskins. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm that these are raw or semi-processed furrier's waste, such as heads, tails, and paws, that have not undergone further manufacturing into finished goods. For instance, a collection of rabbit heads and tails, even if cleaned, would fall here.

What falls outside HS 430220?

The following products are excluded from HS 430220: fully dressed or finished fur skins, which are classified under HS 430211 to 430219, and assembled fur skins, classified under HS 430230. Also excluded are leather pieces and cuttings (Chapter 41) and articles made from fur, such as fur garments or accessories (Chapter 43, other headings). For example, a fur coat made from multiple pieces, or even a single dressed fox pelt, would not be classified here. Similarly, leather scraps from shoe manufacturing are not covered.

What are common classification mistakes for HS 430220?

A common error is misclassifying dressed or finished fur skins as pieces or cuttings under HS 430220. General Rule of Interpretation (GRI) 1 states that classification shall be determined according to the terms of the headings and any relative section or chapter notes. If a product is a "dressed" fur skin, meaning it has undergone processes to preserve and prepare it for use, it should be classified under HS 430211-430219, not as waste or cuttings. Importers may also mistakenly classify assembled fur pieces as individual cuttings.

How should importers classify products under HS 430220?

The correct procedure for classifying products under HS 430220 involves a thorough examination of the physical characteristics and processing of the goods. Importers and customs brokers must determine if the goods are indeed pieces or cuttings of raw or semi-dressed furskins, such as heads, tails, or paws, and that they are not assembled. Consulting the WCO Harmonized System Explanatory Notes and the specific tariff schedules of the importing country, such as the USITC HTS or the EU TARIC, is crucial. Verification of the condition of the skins (raw, semi-dressed, or fully dressed) is paramount.

How is the duty calculated for products under HS 430220?

A shipment of 100 kilograms of rabbit heads and tails, declared at a customs value of $500 USD, would attract a US duty of $50.00. This is calculated using the Most Favored Nation (MFN) rate of 10% ad valorem, applied to the declared customs value. The calculation is: 10% of $500 USD = $50.00. This rate is published in the USITC Harmonized Tariff Schedule (HTS) for subheading 4302.20.0000. Note that specific countries may have different duty rates or preferential treatment.

Which trade agreements reduce duties for HS 430220?

Several free trade agreements may reduce the applicable duty rate for HS 430220, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating goods from Canada and Mexico can enter the US duty-free. For these preferences, a self-certified origin statement on the invoice or a separate certificate of origin is typically required. Additionally, developing countries may benefit from the Generalized System of Preferences (GSP), which can offer reduced or zero duty rates, often requiring a GSP Form A. The specific preferential rate and documentation depend on the origin country and the importing country's regulations.

```

Which HS Codes Are Related?

HS 430190 HS 430211 HS 430230 HS 430110 HS 430160 HS 430180

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the general import duty rates for HS code 430220 (Heads, tails, paws and other pieces or cuttings, not assembled)?

The Most Favored Nation (MFN) duty rate for HS code 430220, which covers heads, tails, paws, and other pieces or cuttings of furskins, not assembled, can vary by importing country. For example, in the United States, the general duty rate is 0.00% ad valorem. In the European Union, under the TARIC system, the rate can be 2.1% ad valorem. It is crucial to consult the specific tariff schedule of the destination country for the definitive rate. Sources include the US International Trade Commission (USITC) for the US, and the EU TARIC database for the EU.

How are preferential duty rates applied to HS 430220 under trade agreements?

Many trade agreements offer preferential duty rates, often resulting in duty-free entry for goods classified under HS 430220. For instance, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada or Mexico may be eligible for a 0.00% duty rate. Similarly, agreements like the one between the EU and certain countries (e.g., South Africa) might provide reduced or zero duties. To claim preferential treatment, importers must typically provide a Certificate of Origin or other proof of origin as stipulated by the specific trade agreement. Always verify the originating status of the goods and the specific requirements of the applicable trade agreement.

What specific criteria define 'pieces or cuttings' for HS code 430220?

HS code 430220 applies to 'Heads, tails, paws and other pieces or cuttings, not assembled'. This means the furskin material must be in parts that are not sewn together or otherwise assembled into a garment, accessory, or larger panel. This includes offcuts, scraps, or sections derived from the primary processing of furskins, such as heads, tails, paws, or any other irregular shapes that do not form a coherent part of the animal's body or a larger, pre-formed piece. The key is that they are individual, unassembled components.

What documentation is typically required for importing goods under HS 430220?

Standard import documentation for HS code 430220 includes a commercial invoice, packing list, and bill of lading or air waybill. Depending on the importing country and the origin of the goods, additional documents may be necessary. This could include a Certificate of Origin to claim preferential duty rates under a Free Trade Agreement (FTA), or specific health or veterinary certificates if required by the importing country's agricultural or animal health authorities. It is advisable to consult with a customs broker or the customs authority of the destination country for a comprehensive list of required documents.

Can you provide an example of how import duty for HS 430220 is calculated?

Let's assume an importer is bringing 100 kg of rabbit fur cuttings (classified under HS 430220) into the European Union, where the duty rate is 2.1% ad valorem. The commercial invoice states a value of €5,000 for these cuttings. The duty calculation would be: Duty = Value × Duty Rate. In this case, Duty = €5,000 × 2.1% = €5,000 × 0.021 = €105. Therefore, the import duty payable would be €105. This calculation is based purely on the value of the goods. Some countries might also apply duties based on weight (specific duty) or a combination of value and weight (compound duty), though for HS 430220, ad valorem duties are common.