HS 401699 Other
Quick Answer: Rubber articles imported under HS 401699 enter the UK at 2.00%, the EU at 2.50%, and the US at 3% (MFN). This residual classification applies to a wide array of vulcanized rubber articles not specifically covered by other headings within Chapter 40, such as seals, gaskets, washers, and other molded or extruded rubber items. Importers should carefully review the specific product's characteristics to ensure it does not fall under a more precise HS code, as misclassification can lead to delays and penalties. CustomTariffs aggregates this data, highlighting the varying duty rates across major markets.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4016995200 | 2.00 % | — | — |
| 4016995290 | 2.00 % | — | — |
| 4016995710 | 2.00 % | — | — |
| 4016995790 | 2.00 % | — | — |
| 4016999110 | — | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4016990000 | — | — | — |
| 4016995210 | 2.50 % | — | — |
| 4016995710 | 2.50 % | — | — |
| 4016995740 | 2.50 % | — | — |
| 4016995790 | 2.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4016990300 | 3% | Free (17 programs) | ["kg"] |
| 4016992000 | 4.3% | Free (17 programs) | ["kg"] |
| 4016990500 | 3.4% | Free (17 programs) | ["kg"] |
| 4016991500 | 2.7% | Free (18 programs) | ["kg"] |
| 401699 | — | — | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4016.99?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 401699 cover?
This subheading covers other products of vulcanized rubber, not elsewhere specified or included in headings 4001 to 4015. It encompasses a wide array of manufactured rubber articles that do not fit into more specific categories within Chapter 40. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU TARIC, this includes items such as rubber rings, gaskets, washers, seals, and various molded or extruded rubber components used in machinery, vehicles, and general industrial applications, provided they are not specifically enumerated elsewhere.
What falls outside HS 401699?
The following products are excluded from HS 401699: articles of hard rubber (which are classified under HS 4017), rubberized fabrics (HS 5903), footwear and parts thereof (Chapter 64), headgear and parts thereof (Chapter 65), and certain specialized rubber articles like pneumatic tires (HS 4011), tubes (HS 4013), and articles of apparel (Chapter 61 or 62). For instance, rubber gloves for medical use (HS 4015) or rubber hoses for specific industrial purposes with integrated metal or textile reinforcement (often classified under more specific headings depending on construction) would not fall under this general "other" category.
What are common classification mistakes for HS 401699?
A common error is misclassifying composite articles where rubber is a significant component but not the sole or predominant material, or where the article has a specific function that dictates a different classification. For example, rubberized conveyor belts (HS 4010) or rubber components that are integral to a machine and cannot be considered separate articles might be incorrectly placed here. Adherence to General Interpretative Rule 1 and Rule 3 of the Harmonized System is crucial, ensuring that the essential character of the good is determined and that more specific headings are prioritized over the residual category of 401699.
How should importers classify products under HS 401699?
The correct procedure for classifying products under HS 401699 involves a systematic approach. Importers and customs brokers must first determine if the article is made of vulcanized rubber and if it is not specifically provided for in any preceding heading or subheading of Chapter 40. This requires a thorough examination of the product's material composition, form, and intended use, referencing the WCO Explanatory Notes and national tariff schedules such as the USITC HTS or EU TARIC. If the product meets these criteria and is not specifically excluded, then HS 401699 is the appropriate classification.
How is the duty calculated for products under HS 401699?
A shipment of 1,000 rubber seals, each weighing 0.05 kg, with a total declared customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared value ($500 USD × 5.0% = $25.00). This calculation is based on the standard duty rate published in the USITC Harmonized Tariff Schedule for HS code 401699.9010 (other rubber articles).
Which trade agreements reduce duties for HS 401699?
Several free trade agreements may reduce the applicable duty rate for HS 401699, including the United States-Mexico-Canada Agreement (USMCA), which can provide for duty-free entry for originating goods from Canada and Mexico. The Generalized System of Preferences (GSP) may also offer reduced or duty-free treatment for originating goods from designated developing countries. To claim preference under USMCA, a self-certified origin statement is typically required. For GSP, a GSP Form A (Certificate of Origin) is generally needed, depending on the importing country's specific requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty for HS code 401699 in the United States?
For HS code 401699, the U.S. Most Favored Nation (MFN) duty rate is 2.5% ad valorem. However, preferential duty rates may apply under various Free Trade Agreements (FTAs). For example, goods originating from Australia (AU) may enter duty-free. Always consult the Harmonized Tariff Schedule of the United States (HTSUS) published by the USITC for the most current and specific rates applicable to your country of origin.
How is the import duty for HS 401699 calculated, and can you provide an example?
The duty for HS code 401699 is typically calculated on an ad valorem basis, meaning a percentage of the declared value of the goods. For instance, if the U.S. MFN duty rate is 2.5% ad valorem, and you import goods valued at $10,000, the duty would be calculated as: $10,000 (value) * 0.025 (duty rate) = $250. If a specific duty rate (e.g., per kilogram) is also applicable, the importer must pay the higher of the two duties. Always verify the specific duty calculation method on the relevant country's tariff schedule.
What are the classification criteria for goods under HS code 401699?
HS code 401699 covers 'Other' articles of vulcanized rubber, not elsewhere specified or included. This means it's a residual category for rubber articles that do not fit into more specific headings within Chapter 40 of the Harmonized System. To classify an item here, it must be made of vulcanized rubber and not be specifically covered by headings like 4001-4015, or other subheadings within 4016 (e.g., gaskets, seals, rings, hoses, tubes, etc.). Common examples include rubber mats, rubber stoppers, and certain molded rubber components not otherwise classified.
Which trade agreements offer preferential duty rates for HS code 401699?
Several trade agreements can provide preferential duty rates for goods classified under HS 401699. For example, the U.S. has agreements with countries like South Korea (KR), Australia (AU), and Chile (CL) which may offer reduced or duty-free entry, provided the goods meet the rules of origin stipulated in those agreements. The EU's TARIC system and the UK Trade Tariff also list preferential rates for various trading partners. Importers must ensure they have the necessary proof of origin documentation to claim these preferential rates.
What documentation is typically required for importing goods under HS code 401699?
Standard import documentation for HS code 401699 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Crucially, for preferential duty rates, a Certificate of Origin or a declaration of origin compliant with the specific Free Trade Agreement (FTA) is mandatory. Depending on the product and destination country, additional certifications related to safety, quality, or material composition might be required. Customs brokers should always verify the specific documentation requirements with the customs authority of the importing country.