HS 401519 Other
Quick Answer: Gloves and mittens of vulcanized rubber, not combined with textile or leather, imported under HS 401519 enter the UK at 2.00%, the EU at 2.70%, and the US with varied rates including Free and up to 75% depending on origin. This residual category applies to rubber gloves and mittens not specifically classified elsewhere within heading 4015, such as those for medical, surgical, or industrial use. Importers should verify the specific subheadings and preferential trade agreements applicable in the destination country, as the US, in particular, has a wide range of duty rates. CustomTariffs aggregates this data, highlighting the importance of precise classification and origin for duty determination.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4015190000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4015190000 | 2.70 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 401519 | — | — | — |
| 4015191110 | — | — | ["doz. prs."] |
| 4015191150 | — | — | ["doz. prs."] |
| 4015195100 | 14% | Free (17 programs) | ["doz. prs."] |
| 40151911 | 3% | Free (17 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4015.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 401519 cover?
This subheading covers other gloves, mittens, and mitts, made of vulcanized rubber, not combined with textile materials, that do not fall under the more specific subheadings within HS 4015. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, this category is for items such as industrial rubber gloves for chemical handling, medical examination gloves (if not specifically classified elsewhere), and protective gloves for general use where the primary material is vulcanized rubber and no significant textile component is present.
What falls outside HS 401519?
The following products are excluded from HS 401519: gloves, mittens, and mitts made of rubber combined with textile materials, which are typically classified under HS 401511 (if knitted or crocheted) or other relevant headings if the textile component is dominant. Also excluded are articles of apparel for other parts of the body made of vulcanized rubber (e.g., aprons, footwear), and articles of vulcanized rubber not specifically mentioned in Chapter 40. For instance, rubberized fabric gloves would be classified based on the textile component, and solid rubber protective gear would fall under different headings.
What are common classification mistakes for HS 401519?
A common error is misinterpreting the "other" designation, leading to the incorrect classification of items that should fall under more specific subheadings within HS 4015 or even other chapters. For example, gloves with a significant textile lining or outer layer, or those with integrated protective features not solely derived from vulcanized rubber, may be misclassified here. Adherence to General Rule of Interpretation (GRI) 1, which states that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes, is crucial to avoid these mistakes.
How should importers classify products under HS 401519?
The correct procedure for classifying products under HS 401519 involves a thorough examination of the product's material composition and intended use, referencing the WCO Harmonized System Explanatory Notes and the specific tariff schedule of the importing country. Importers and customs brokers must confirm that the product is indeed made of vulcanized rubber, is a glove, mitten, or mitt, and does not meet the criteria for more specific subheadings within HS 4015 or other HS chapters. This often requires reviewing product specifications, material composition declarations, and potentially consulting with the manufacturer.
How is the duty calculated for products under HS 401519?
A shipment of 1,000 pairs of disposable nitrile examination gloves, declared at a customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS code 401519. The calculation is: 5.0% × $500 USD = $25.00. It is important to note that nitrile gloves are often classified under 4015.19 if they are not combined with textile materials and are considered "other" than those specifically enumerated in 4015.11.
Which trade agreements reduce duties for HS 401519?
Several free trade agreements may reduce the applicable duty rate for HS 401519, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, originating gloves from Canada and Mexico can enter the US duty-free. To claim this preferential rate, a self-certified origin statement is required. Additionally, for certain developing countries, the Generalized System of Preferences (GSP) may offer reduced or zero duties, typically requiring a GSP Form A. The specific preferential rate and documentation depend on the origin country and the importing country's regulations.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 401519, and how do preferential rates apply?
HS code 401519 covers "Other gloves, mittens and mitts, of vulcanized rubber, other than those for industrial or medical purposes." The Most Favored Nation (MFN) duty rate can vary significantly depending on the importing country. For example, the USITC Harmonized Tariff Schedule may list a rate of 2.00% ad valorem. However, preferential rates under Free Trade Agreements (FTAs) can reduce or eliminate these duties. For instance, rates such as Free (under agreements like AU, BH, CL, CO, KR, SG, etc.) are common for qualifying goods from partner countries. Importers must verify the specific MFN rate for their destination country and confirm eligibility for any preferential duty rates by obtaining a valid Certificate of Origin.
How is HS code 401519 classified, and what distinguishes it from other rubber glove classifications?
HS code 401519 is for "Other" vulcanized rubber gloves, mittens, and mitts. This classification is used when the goods do not fall under more specific subheadings within 4015, such as those for industrial or medical purposes (which would have their own HS codes, e.g., 4015.11 for industrial gloves). The key criteria for classification under 4015.19 are that the gloves must be made of vulcanized rubber and not be intended for industrial (e.g., chemical handling, heavy-duty work) or medical (e.g., surgical, examination) applications. Common examples include general-purpose household gloves or fashion gloves made of rubber.
What documentation is typically required for importing goods under HS code 401519?
Standard import documentation for HS code 401519 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Crucially, if claiming preferential duty rates under a Free Trade Agreement (FTA), a valid Certificate of Origin (COO) is mandatory. The specific requirements can vary by importing country and the nature of the goods. It is advisable to consult the customs authority of the destination country or work with a customs broker to ensure all necessary documents are prepared accurately to avoid delays or penalties.
Which major trade agreements commonly offer preferential duty rates for HS code 401519?
Several trade agreements can provide preferential duty rates for HS code 401519. For imports into the United States, agreements like the USMCA (United States-Mexico-Canada Agreement) might offer reduced or zero duties for qualifying goods originating from Canada or Mexico. Other significant agreements that often feature preferential rates include those with Australia (AU), Bahrain (BH), Chile (CL), Colombia (CO), Israel (IL), Jordan (JO), South Korea (KR), Morocco (MA), Oman (OM), Panama (PA), Peru (PE), Singapore (SG), and various others listed with 'Free' duty rates in tariff schedules. Importers must ensure their goods meet the rules of origin stipulated in the relevant agreement to benefit from these lower tariffs.
How is the import duty for HS code 401519 calculated with a specific example?
Import duties are typically calculated based on either the value of the goods (ad valorem) or their quantity (specific duty), or a combination. For HS code 401519, let's assume an importing country has an MFN duty rate of 2.00% ad valorem and a specific duty of $0.50 per pair. If you import 1,000 pairs of rubber gloves valued at $2.00 per pair, the calculation would be:
- Ad Valorem Duty: (1,000 pairs * $2.00/pair) * 2.00% = $2,000 * 0.02 = $40.00
- Specific Duty: 1,000 pairs * $0.50/pair = $500.00
In such a scenario, customs would typically assess the higher of the two duties, or a combination if the tariff specifies (e.g., '2% ad valorem plus $0.50 per pair'). For this example, the specific duty of $500.00 would likely be applied. Always consult the official tariff schedule of the importing country for the precise calculation method.