HS 401034 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm

Quick Answer: Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, with an outside circumference exceeding 180 cm but not exceeding 240 cm, enter the UK at 6.00%, the EU at 6.50%, and the US at 3.4% under the Most Favored Nation (MFN) rate. This specific classification covers V-belts designed for power transmission that fall within a defined size range, excluding V-ribbed types. Importers should be aware of potential preferential duty rates available in the US for goods originating from certain Free Trade Agreement partner countries. CustomTariffs aggregates this data to assist trade professionals.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
4010340000 6.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
4010340000 6.50 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
401034 — — —
4010343000 3.4% Free (18 programs) ["kg"]
4010346000 2.8% Free (17 programs) ["kg"]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 4010.34?

Imports of Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, GSP, and 16 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 401034 cover?

This subheading covers endless transmission belts, specifically those of a trapezoidal cross-section (commonly known as V-belts), excluding V-ribbed belts. According to the World Customs Organization (WCO) Harmonized System Nomenclature, these belts must have an outside circumference exceeding 180 cm but not exceeding 240 cm. The USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, focusing on the specific dimensions and cross-sectional shape of the rubber or textile-reinforced rubber belts used for mechanical power transmission.

What falls outside HS 401034?

The following products are excluded from HS 401034: V-belts with an outside circumference outside the specified range of 180 cm to 240 cm, V-ribbed belts (which are classified under HS 401035), and transmission belts made from materials other than rubber or textile-reinforced rubber. Additionally, belts that are not endless, such as those sold by the meter and intended to be cut to length by the user, or belts with different cross-sectional shapes like flat belts, are classified elsewhere within Chapter 40.

What are common classification mistakes for HS 401034?

A common error is misinterpreting the circumference measurement. Importers may incorrectly measure the inner circumference or fail to account for the belt's thickness when determining the outside circumference. Another mistake involves confusing V-belts with V-ribbed belts, which have distinct classification codes. According to General Rule of Interpretation (GRI) 1, classification is determined by the terms of the heading and any relative section or chapter notes, emphasizing the importance of precise measurement and understanding the specific characteristics of the belt.

How should importers classify products under HS 401034?

The correct procedure for classifying products under HS 401034 involves a multi-step verification process. Importers and customs brokers must first ascertain the material composition of the transmission belt, confirming it is rubber or textile-reinforced rubber. Next, they must accurately measure the outside circumference to ensure it falls within the 180 cm to 240 cm range. Finally, they must verify that the belt has a trapezoidal cross-section and is not V-ribbed, consulting product specifications and potentially the manufacturer for definitive confirmation.

How is the duty calculated for products under HS 401034?

A single V-belt, weighing 0.5 kg and declared at a customs value of $25.00 USD, would attract a US duty of $1.25. This is calculated using the Most Favored Nation (MFN) rate of 5% ad valorem, as published in the USITC Harmonized Tariff Schedule for HS 401034 (5% x $25.00 = $1.25). If the belt's circumference was precisely measured and confirmed to be within the 180-240 cm range, this ad valorem duty would apply to its declared value.

Which trade agreements reduce duties for HS 401034?

Several free trade agreements may reduce the applicable duty rate for HS 401034, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, eligible V-belts originating from Canada or Mexico can enter the United States duty-free. To claim this preference, a valid USMCA Certificate of Origin is required. For imports into the European Union, belts originating from countries with a Free Trade Agreement, such as Switzerland, may also benefit from reduced or zero duty rates, often requiring an EUR.1 movement certificate.

```

Which HS Codes Are Related?

HS 401033 HS 401032 HS 401035 HS 401036 HS 401031 HS 401011

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the import duty rates for HS code 401034, specifically for endless V-belts with an outside circumference between 180 cm and 240 cm?

The Most Favored Nation (MFN) duty rate for HS code 401034 is typically 6.50% ad valorem. However, preferential duty rates may apply under various trade agreements. For example, under the US-Australia Free Trade Agreement (AU), the rate is Free. Importers should consult the specific tariff schedule of their importing country and any applicable trade agreements to determine the precise duty rate. For the United States, the USITC Harmonized Tariff Schedule is the definitive source.

What specific criteria define an 'endless transmission belt of trapezoidal cross-section (V-belt)' under HS code 401034, and how does the circumference limit affect classification?

HS code 401034 covers V-belts that are manufactured as a continuous loop ('endless') and have a trapezoidal cross-section. The key distinguishing feature for this specific code is the outside circumference, which must exceed 180 cm but not exceed 240 cm. Belts outside this circumference range, or those that are not endless (e.g., cut-to-length belts), would be classified under different subheadings within HS 4010. The cross-section shape (trapezoidal) is crucial; V-ribbed belts, for instance, fall under a different classification.

Are there specific documentation requirements when importing goods classified under HS code 401034?

While specific documentation can vary by importing country and the nature of the goods, importers and customs brokers should generally be prepared to provide a commercial invoice, packing list, and bill of lading or air waybill. For HS code 401034, a manufacturer's declaration or certificate of origin may be required to substantiate claims of preferential duty rates under trade agreements. It is also advisable to have technical specifications or product literature that confirms the V-belt's dimensions (especially circumference) and construction to support the HS classification.

How is the import duty calculated for HS code 401034, and can you provide an example?

The duty for HS code 401034 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if the MFN duty rate is 6.50% and a shipment of these V-belts has a customs value of $10,000 USD, the import duty would be calculated as: $10,000 (Customs Value) × 0.0650 (Duty Rate) = $650 USD. If a specific duty were applicable (e.g., per unit), the calculation would be rate per unit × quantity. Always ensure the customs value is correctly determined according to the relevant valuation rules (e.g., WTO Valuation Agreement).

Which major trade agreements offer preferential duty rates for HS code 401034, and how can importers leverage them?

Several trade agreements can provide preferential duty rates, often reducing or eliminating duties for HS code 401034. Examples include agreements with countries like Australia (AU), South Korea (KR), and others listed with 'Free' rates in the USITC Harmonized Tariff Schedule. To leverage these agreements, importers must ensure the goods meet the rules of origin stipulated in the specific trade agreement. This typically requires a valid Certificate of Origin or other proof of origin documentation provided by the exporter. Verifying eligibility and obtaining the correct documentation is crucial to benefit from reduced tariffs.