HS 401032 Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm

Quick Answer: Rubber endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, with an outside circumference between 60 cm and 180 cm, enter the UK at 6.00%, the EU at 6.50%, and the US with rates varying from 3.4% to 30%, with many countries receiving duty-free entry. This classification specifically covers V-belts within a defined size range, excluding V-ribbed types. Importers should verify specific preferential rates and potential trade agreements that may affect the US duty. CustomTariffs aggregates this information for compliance.

What Are the Import Duty Rates?

🇬🇧 United Kingdom

Code MFN Preferential Unit
4010320000 6.00 % — —

🇪🇺 European Union (TARIC)

Code MFN Preferential Unit
4010320000 6.50 % — —

🇺🇸 United States (HTSUS)

Code MFN Preferential Unit
4010323000 3.4% Free (18 programs) ["kg"]
401032 — — —
4010326000 2.8% Free (17 programs) ["kg"]

Special rates available under trade agreements including USMCA, KORUS, GSP.

Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).

Data compiled and presented by HSRates.

Which Trade Agreements Reduce Duties for HS 4010.32?

Imports of Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 60 cm but not exceeding 180 cm may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.

United States (HTSUS)

Free for USMCA, KORUS, GSP, and 16 other programs

European Union (TARIC)

Preferential rate data not yet available.

United Kingdom

Preferential rate data not yet available.

Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.

Data compiled by HSRates.

Which Preferential Rates Apply to Your Origin Country?

Select an origin country to see if preferential rates apply.

Preferential rates based on available trade agreements. Actual rates may vary.

How to Classify This HS Code?

```html

What products does HS 401032 cover?

This subheading covers endless transmission belts of trapezoidal cross-section, commonly known as V-belts, specifically those that are not V-ribbed and have an outside circumference exceeding 60 cm but not exceeding 180 cm. According to the World Customs Organization (WCO) Harmonized System Explanatory Notes, these belts are designed for transmitting power and are typically made from vulcanized rubber, reinforced with textile materials or metal cords. The USITC Harmonized Tariff Schedule (HTS) and the EU TARIC database confirm this scope, focusing on the specific dimensions and cross-sectional shape.

What falls outside HS 401032?

The following products are excluded from HS 401032: V-belts with an outside circumference less than or equal to 60 cm or greater than 180 cm, and V-ribbed belts, which are classified under HS 401033. Additionally, belts of other cross-sections, such as flat belts or round belts, are not included. Conveyor belts, even if made of rubber and of similar dimensions, are also classified separately under HS 401039, as their primary function is material transport rather than power transmission.

What are common classification mistakes for HS 401032?

A common error is misinterpreting the circumference measurement or the cross-sectional shape. Importers may incorrectly classify V-ribbed belts under this subheading, failing to recognize that they belong to a separate category. Another mistake involves confusion with conveyor belts. Following General Rule of Interpretation (GRI) 1, the specific wording of the subheading, particularly "trapezoidal cross-section (V-belts), other than V-ribbed," and the defined circumference range, is paramount for correct classification.

How should importers classify products under HS 401032?

The correct procedure for classifying transmission belts under HS 401032 involves a two-step verification process. First, confirm that the belt is of a trapezoidal cross-section and is not V-ribbed. Second, accurately measure its outside circumference. If the circumference falls between 60 cm and 180 cm, inclusive, then HS 401032 is likely applicable. Importers and customs brokers should consult the official tariff schedules of the importing country, such as the USITC HTS or the EU TARIC, for definitive guidance.

How is the duty calculated for products under HS 401032?

A shipment of 100 V-belts, each with an outside circumference of 100 cm and a declared customs value of $500 USD, would attract a US duty of $25.00. This is calculated using the Most Favored Nation (MFN) rate of 5.0% ad valorem, applied to the declared value ($500 USD × 5.0% = $25.00). This calculation is based on the MFN duty rate published in the USITC Harmonized Tariff Schedule for HS 401032.

Which trade agreements reduce duties for HS 401032?

Several free trade agreements may reduce the applicable duty rate for HS 401032, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, V-belts originating from Canada or Mexico can be imported duty-free. To claim this preference, a valid USMCA Certificate of Origin is required. Additionally, for goods originating from countries benefiting from the Generalized System of Preferences (GSP) in the EU, preferential rates may apply, often requiring a EUR.1 movement certificate.

```

Which HS Codes Are Related?

HS 401034 HS 401033 HS 401035 HS 401036 HS 401031 HS 401011

Not the right code? Search all HS codes to find the correct tariff classification.

FAQ

What are the import duty rates for HS code 401032 (V-belts, 60-180 cm circumference)?

The Most Favored Nation (MFN) duty rate for HS code 401032 is typically 6.50% ad valorem. However, preferential rates may apply under various trade agreements. For example, under the Generalized System of Preferences (GSP), certain developing countries may receive duty-free entry (Free). It is crucial to consult the specific tariff schedule of the importing country and verify eligibility for preferential treatment based on the country of origin and product documentation.

How is the classification of HS code 401032 determined?

HS code 401032 specifically covers endless transmission belts made of rubber or plastics, characterized by a trapezoidal cross-section (V-belts). Key classification criteria include: 1) The material composition (rubber or plastics). 2) The construction (endless, not joined). 3) The cross-sectional shape (trapezoidal, V-shaped). 4) The outside circumference, which must exceed 60 cm but not exceed 180 cm. V-ribbed belts are excluded from this specific code and fall under a different subheading. Always refer to the Explanatory Notes of the Harmonized System for detailed guidance.

What documentation is typically required for importing goods under HS code 401032?

Standard import documentation for HS code 401032 includes a commercial invoice, packing list, and bill of lading or air waybill. To claim preferential duty rates, a Certificate of Origin (COO) is essential, demonstrating that the goods meet the rules of origin for the applicable trade agreement. Manufacturers' specifications or technical data sheets confirming the material and dimensions (especially circumference) may also be requested by customs authorities to verify correct classification.

Which trade agreements commonly offer reduced or free duties for HS code 401032?

Several trade agreements can impact duty rates for HS code 401032. For instance, agreements like the USMCA (United States-Mexico-Canada Agreement) may offer preferential rates for goods originating from member countries. The EU's trade agreements with various partner countries and the UK's Global Tariff (UKGT) also provide specific preferential duty rates. Importers should verify the specific provisions of agreements relevant to their country of origin and destination, as eligibility and rates can vary significantly.

How is the duty calculated for HS code 401032 if the MFN rate is 6.50% and the value of the shipment is $10,000 USD?

For an ad valorem duty rate, the duty is calculated as a percentage of the customs value of the imported goods. If the MFN duty rate for HS code 401032 is 6.50% and the customs value of the shipment is $10,000 USD, the duty calculation would be: $10,000 (Customs Value) × 0.0650 (Duty Rate) = $650 USD. This amount represents the import duty payable. Note that other taxes and fees, such as customs processing fees or VAT, may also apply.