HS 401019 Other
Quick Answer: Rubber conveyor belts imported under HS 401019 enter the UK at 6.00%, the EU at 6.50%, and the US with a range of rates including 74% and 8%, with some countries receiving duty-free entry. This residual classification applies to conveyor belts made of vulcanized rubber that do not fall under more specific headings within Chapter 40. Importers should carefully verify the specific subheadings and applicable preferential rates based on the country of origin, as the US, in particular, exhibits significant tariff variation. CustomTariffs aggregates this data, highlighting the importance of precise classification and origin verification for compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4010190000 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4010190000 | 6.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4010195000 | 8% | Free (17 programs) | ["kg"] |
| 401019 | — | — | — |
| 4010191000 | 4.1% | Free (17 programs) | ["kg"] |
| 4010195500 | 6.4% | Free (17 programs) | ["kg"] |
| 4010198000 | 1.9% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4010.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 401019 cover?
This subheading covers "other" conveyor belts or belting, not reinforced with metal, and not exceeding 20 cm in width, falling under HS Heading 4010. According to the World Customs Organization (WCO) Harmonized System Nomenclature, this residual category captures items that do not fit into more specific subheadings within 4010. For instance, the USITC Harmonized Tariff Schedule (HTS) defines this category by exclusion from other specific classifications within Heading 4010, implying it applies to rubber conveyor belts of the specified width that are not otherwise specified.
What falls outside HS 401019?
The following products are excluded from HS 401019: conveyor belts or belting reinforced with metal, conveyor belts or belting exceeding 20 cm in width, and transmission belts or belting. Also excluded are products classified under other chapters of the Harmonized System, such as those made primarily of textile materials (Chapter 59) or plastics (Chapter 39), even if they serve a similar function. For example, a plastic conveyor belt would be classified under Chapter 39, not Chapter 40.
What are common classification mistakes for HS 401019?
A common error is misinterpreting the width limitation of 20 cm. Importers may incorrectly classify wider rubber conveyor belts under this subheading when they should be classified under a more appropriate subheading within 4010 that specifically addresses wider belts. Another mistake involves confusing conveyor belts with transmission belts, which are distinct in their construction and function and are classified separately. Adherence to General Interpretative Rule 1 and 3 is crucial for accurate classification.
How should importers classify products under HS 401019?
The correct procedure for classifying products under HS 401019 involves a multi-step process. First, determine if the product is a rubber conveyor belt or belting. Second, verify that it is not reinforced with metal. Third, confirm that its width does not exceed 20 cm. If these criteria are met and the product does not fall under any more specific subheading within Heading 4010, then HS 401019 is likely appropriate. Consulting the official tariff schedule of the importing country, such as the USITC HTS or the EU TARIC, is essential.
How is the duty calculated for products under HS 401019?
A shipment of 1,000 meters of a rubber conveyor belt, not reinforced with metal and measuring 15 cm in width, declared at a customs value of $5,000 USD, would attract a US duty of $250.00. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($5,000 USD × 0.05 = $250.00). This calculation is based on the rates published in the USITC Harmonized Tariff Schedule.
Which trade agreements reduce duties for HS 401019?
Several free trade agreements may reduce the applicable duty rate for HS 401019, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, eligible conveyor belts originating from Canada or Mexico may be admitted duty-free. To claim this preference, a valid USMCA certification of origin is required. Additionally, certain developing countries may benefit from the Generalized System of Preferences (GSP) in some jurisdictions, potentially offering reduced or zero duty rates upon submission of a GSP Form A.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 401019?
For HS code 401019, which covers 'Other' conveyor belts and transmission belts of vulcanized rubber, the Most Favored Nation (MFN) duty rate in the United States is 6.50% ad valorem. However, preferential duty rates are available for goods originating from countries with trade agreements. For example, under the US-Australia Free Trade Agreement (AU), the duty rate is Free. It is crucial to verify the specific origin and applicable trade agreement to determine the correct duty rate. Consult the US International Trade Commission (USITC) Harmonized Tariff Schedule for detailed rates.
How is the import duty for HS code 401019 calculated, and can you provide an example?
The import duty for HS code 401019 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For instance, if a shipment of conveyor belts classified under 401019 has a customs value of $10,000 and the MFN duty rate is 6.50%, the calculated duty would be $10,000 * 0.065 = $650. Always ensure your customs value is accurately declared and supported by proper documentation, such as commercial invoices.
What are the classification criteria for HS code 401019?
HS code 401019 falls under Chapter 40, which pertains to 'Rubber and articles thereof.' Specifically, it is within heading 4010, covering 'Conveyor or transmission belts or belting of vulcanized rubber.' Since 401019 is designated as 'Other,' it applies to conveyor or transmission belts and belting of vulcanized rubber that are not specifically covered by subheadings 401010 (Conveyor belts and belting) or 401031-401039 (Transmission belts and belting). This typically includes belts with reinforcing materials not forming a textile structure, or belts with specific constructions not detailed elsewhere. Proper classification requires examining the material composition, construction, and intended use of the belt.
Which trade agreements offer preferential duty rates for HS code 401019, and what documentation is needed?
Several trade agreements provide preferential duty rates for goods classified under HS code 401019. Examples include agreements with Australia (AU), Chile (CL), Colombia (CO), South Korea (KR), and Singapore (SG), often resulting in a Free duty rate. To claim preferential treatment, importers must provide a valid Certificate of Origin (COO) or a declaration of origin from the exporter, certifying that the goods meet the rules of origin stipulated in the relevant Free Trade Agreement (FTA). The specific format and requirements for the COO can vary by agreement, so consult the text of the applicable FTA and guidance from U.S. Customs and Border Protection (CBP).
Are there any specific documentation requirements beyond a commercial invoice and packing list for importing goods under HS code 401019?
While a commercial invoice, packing list, and bill of lading are standard import documents, for HS code 401019, ensuring compliance with product-specific regulations is key. If the belts contain certain materials or are intended for specific industrial applications, additional documentation might be required. For instance, if the rubber contains restricted substances, compliance with environmental or safety regulations (e.g., REACH in the EU) may necessitate specific declarations or test reports. Always verify if the exporting country or the intended use of the product triggers any special import requirements with the relevant government agencies in the importing country.