HS 400912 With fittings
Quick Answer: Hoses of rubber, reinforced or otherwise, with fittings, imported under HS 400912 enter the UK at 2.00%, the EU at 3.00%, and the US at 2.5% (with numerous preferential rates, including Free for certain trading partners). This classification specifically applies to rubber hoses that have been fitted with connectors, couplings, or other end pieces. Importers and customs brokers should carefully verify the specific type of fitting and its material, as this can sometimes influence classification or the applicability of preferential duty rates. According to CustomTariffs data, understanding these nuances is crucial for accurate declaration and cost optimization.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4009120010 | — | — | — |
| 4009120000 | — | — | — |
| 4009120090 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4009120010 | — | — | — |
| 4009120000 | — | — | — |
| 4009120090 | 3.00 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4009120020 | — | — | ["kg"] |
| 4009120050 | — | — | ["kg"] |
| 40091200 | 2.5% | Free (19 programs) | — |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4009.12?
Imports of With fittings may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 16 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 400912 cover?
This subheading covers tubes, pipes, and hoses of vulcanized rubber, reinforced or otherwise combined with other materials, specifically those that are "with fittings." According to the World Customs Organization's Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC, this classification applies when the rubber tubing is equipped with connectors, couplings, or other terminal fittings that are integral to its function or presentation for sale as a complete unit. These fittings are typically made of metal, plastic, or other materials and are permanently attached.
What falls outside HS 400912?
The following products are excluded from HS 400912: plain rubber tubing or hoses without any attached fittings, even if they are designed for connection to other systems. Also excluded are rubber hoses sold with separate, unassembled fittings that are intended to be attached by the end-user. For instance, a roll of garden hose sold without any pre-attached couplings would not fall under this subheading. Similarly, industrial hoses that are cut to length and sold without any integrated or permanently affixed end connections are classified under other subheadings within HS 4009, depending on their reinforcement and construction.
What are common classification mistakes for HS 400912?
A common error is misclassifying rubber hoses that are supplied with loose, non-attached fittings. According to General Rule of Interpretation (GRI) 1 and GRI 3(b) of the Harmonized System, classification is determined by the essential character of the good. When fittings are not permanently affixed and do not form an integral part of the hose assembly as presented, the hose itself is typically classified under a different subheading of 4009 based on its construction. Importers may also incorrectly classify hoses with simple, unattached clamps or ties as "fittings" when these do not constitute the functional connection components intended by the subheading.
How should importers classify products under HS 400912?
The correct procedure for classifying products under HS 400912 involves a thorough examination of the product's presentation. Importers and customs brokers must verify that the rubber tubing or hose has fittings that are permanently attached and are essential for its immediate use as a connected assembly. This requires reviewing product descriptions, technical specifications, and often the physical product itself. If the fittings are integral and pre-installed, and the product is intended to be used as a complete unit upon arrival, then HS 400912 is appropriate. If fittings are separate or easily removable, further analysis under other subheadings of 4009 is necessary.
How is the duty calculated for products under HS 400912?
A 10-meter automotive coolant hose, reinforced with textile and equipped with metal crimped fittings on both ends, declared at a customs value of $150 USD, would attract a US duty of $15.00. This is calculated using the Most Favored Nation (MFN) duty rate of 10% ad valorem, applied to the declared customs value. The calculation is: 10% of $150 USD = $15.00. This rate is published in the USITC Harmonized Tariff Schedule (HTS) for subheading 4009120000.
Which trade agreements reduce duties for HS 400912?
Several free trade agreements may reduce the applicable duty rate for HS 400912, including the United States-Mexico-Canada Agreement (USMCA). Under USMCA, hoses originating from Canada or Mexico may be eligible for a 0% duty rate. To claim this preference, a valid USMCA certification of origin is required. Additionally, hoses originating from countries benefiting from the US Generalized System of Preferences (GSP) program may also receive reduced or duty-free treatment, with a GSP Form A or a self-certified origin statement often being the required documentation, depending on the specific country and product.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 400912, and how do preferential rates apply?
The Most Favored Nation (MFN) duty rate for HS code 400912, which covers 'Tubes, pipes and hoses, of vulcanised rubber, not reinforced or otherwise combined with other materials, without fittings', can vary. For example, the USITC Harmonized Tariff Schedule may list a rate such as 2.00% or 3.00%. However, preferential rates under various trade agreements can significantly reduce or eliminate these duties. For instance, rates listed as 'Free (A,AU,B,BH,C,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)' indicate duty-free entry for goods originating from countries or regions with specific trade agreements (e.g., Australia, Canada, Chile, South Korea, etc., depending on the specific agreement codes). Importers should always verify the applicable preferential rate based on the country of origin and the relevant trade agreement.
What specific criteria determine if a rubber hose falls under HS 400912, particularly concerning 'fittings'?
HS code 400912 specifically covers 'Tubes, pipes and hoses, of vulcanised rubber, not reinforced or otherwise combined with other materials, without fittings'. The key differentiator is the absence of any attached fittings, such as couplings, connectors, nozzles, or flanges, that are designed to join the hose to other systems or equipment. If a hose is imported with such fittings already affixed, it would likely be classified under a different subheading, such as 4009.31 (reinforced or combined) or 4009.41 (not reinforced, but with fittings), depending on whether the rubber itself is reinforced. The presence or absence of these integral connecting components is crucial for correct classification.
What documentation is typically required when importing goods classified under HS 400912?
Standard import documentation for HS code 400912 generally includes a commercial invoice, packing list, and bill of lading or air waybill. Crucially, for claiming preferential duty rates under trade agreements, a Certificate of Origin (COO) is usually mandatory. This document, issued by the competent authority in the exporting country, certifies that the goods meet the rules of origin stipulated by the trade agreement. Importers may also need to provide product specifications or technical data sheets to verify that the hose is indeed made of vulcanized rubber and is not reinforced or combined with other materials, and importantly, that it is imported without fittings.
How is the import duty for HS code 400912 calculated, and can you provide an example?
The duty calculation for HS code 400912 typically depends on whether the duty rate is ad valorem (a percentage of the value) or specific (a fixed amount per unit). Let's assume an ad valorem rate of 2.5% and a shipment of rubber hoses valued at $10,000 USD. The duty would be calculated as: Duty = Value of Goods × Duty Rate. In this example: Duty = $10,000 × 2.5% = $10,000 × 0.025 = $250. If the duty were specific, for instance, $0.50 per kilogram, and the shipment weighed 500 kg, the duty would be: Duty = Weight × Specific Rate = 500 kg × $0.50/kg = $250. Importers must consult the specific tariff schedule for the applicable rate type and percentage or amount.
Which common trade agreements offer preferential duty rates for HS code 400912, and how can an importer verify eligibility?
Several trade agreements can provide preferential duty rates for HS code 400912. For example, the United States has agreements like the USMCA (United States-Mexico-Canada Agreement), CAFTA-DR (Dominican Republic-Central America Free Trade Agreement), and others with countries like South Korea (KORUS FTA). The European Union has its network of Association Agreements and Free Trade Agreements, and the UK has its own set of trade deals post-Brexit. To verify eligibility, an importer must first confirm the country of origin of the goods. Then, they need to consult the specific trade agreement's text or the relevant customs authority's database (e.g., USITC, EU TARIC, UK Trade Tariff) to check if HS code 400912 is covered and if the goods meet the required rules of origin. A valid Certificate of Origin is typically required to claim these preferential rates.