HS 400819 Other
Quick Answer: Rubber, vulcanized, in primary forms or in plates, sheets or strip, not elsewhere specified under HS 400819 enters the UK at 2.00%, the EU at 2.90%, and the US with rates ranging from Free to 25%. This residual classification applies to vulcanized rubber products that do not fit into more specific categories within Chapter 40, such as profiles or tubing. Importers should carefully review the specific subheadings within each jurisdiction's tariff schedule, as the US, in particular, has multiple lines with varying duty rates. CustomTariffs aggregates this data, highlighting the importance of precise classification to ensure accurate duty assessment and compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4008190000 | 2.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 4008190000 | 2.90 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 400819 | — | — | — |
| 4008192000 | Free | — | ["kg"] |
| 4008194000 | Free | — | ["kg"] |
| 4008196000 | 3.3% | Free (17 programs) | ["kg"] |
| 4008198000 | 3.3% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 4008.19?
Imports of Other may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 400819 cover?
This subheading covers "other" forms of vulcanized rubber, specifically plates, sheets, rods, and profiles, that are not cellular. According to the WCO Harmonized System Explanatory Notes and definitions found in official tariff schedules like the USITC Harmonized Tariff Schedule (HTS) and the EU's TARIC database, this category encompasses a wide array of extruded or molded rubber articles. These items are typically manufactured from synthetic or natural rubber compounds and are designed for various industrial or commercial applications, excluding those that are foamed or cellular in structure.
What falls outside HS 400819?
The following products are excluded from HS 400819: cellular or foamed rubber articles, which are classified under HS 400811. Also excluded are finished rubber articles that have undergone further processing or assembly into specific functional items, such as tires (Chapter 40), footwear (Chapter 64), or rubber hoses and tubing (HS 4009). Articles of vulcanized rubber that are not in the form of plates, sheets, rods, or profiles, such as molded rubber seals or gaskets that are not considered profiles, may also fall under different classifications depending on their specific form and function.
What are common classification mistakes for HS 400819?
A common error is misclassifying finished rubber goods or rubber articles that are not in the specified forms of plates, sheets, rods, or profiles. For instance, rubber mats with specific designs or functions might be mistakenly classified here instead of under a more specific heading for mats or floor coverings. Additionally, confusion can arise with semi-finished rubber products that are intended for further specific manufacturing processes, potentially leading to classification under Chapter 40's general provisions or other headings if they do not strictly meet the definition of plates, sheets, rods, or profiles as per General Interpretative Rule 1.
How should importers classify products under HS 400819?
The correct procedure for classifying products under HS 400819 involves a detailed examination of the product's physical characteristics and form. Importers and customs brokers must first determine if the article is made of vulcanized rubber and if it is in the form of plates, sheets, rods, or profiles. Crucially, they must verify that the product is not cellular or foamed. Consulting the official WCO Explanatory Notes and the specific tariff schedule of the importing country, such as the USITC HTS or the UK Trade Tariff, is essential to confirm the precise definition and scope of this subheading.
How is the duty calculated for products under HS 400819?
A shipment of 1,000 kilograms of EPDM rubber profiles, declared at a customs value of $5,000 USD, would attract a US duty of $750.00. This is calculated using the Most Favored Nation (MFN) rate of 15% ad valorem published in the USITC Harmonized Tariff Schedule (HTS) for HS 400819. The calculation is: 15% of $5,000 USD = $750.00. Note that specific countries may have different duty rates or preferential agreements that could alter this amount.
Which trade agreements reduce duties for HS 400819?
Several free trade agreements may reduce the applicable duty rate for HS 400819, including the United States-Mexico-Canada Agreement (USMCA), which can provide for duty-free entry for originating goods from Canada and Mexico. The Generalized System of Preferences (GSP) may also offer reduced or duty-free rates for eligible products from designated developing countries. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a GSP Form A for GSP beneficiaries, depending on the specific agreement and the importing country's requirements.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What is the import duty rate for HS code 400819, and are there preferential rates available?
HS code 400819 covers 'Other' products of vulcanized rubber, specifically those not in sheet, strip, or profile form, and not shaped or worked. The Most Favored Nation (MFN) duty rate in the United States is 2.90% ad valorem. For goods originating in countries with a Free Trade Agreement (FTA) with the US, such as Australia, Chile, or South Korea, preferential duty rates may apply, potentially reducing or eliminating the duty. Importers must possess a valid Certificate of Origin to claim preferential treatment. Always consult the Harmonized Tariff Schedule of the United States (HTSUS) for the most current rates and specific country-based exceptions.
How is the duty for HS code 400819 calculated, and can you provide an example?
The duty for HS code 400819 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the imported goods. For example, if a shipment of 'other' vulcanized rubber products under HS 400819 has a declared customs value of $10,000 and the MFN duty rate is 2.90%, the calculated duty would be $10,000 * 0.0290 = $290.00. It is crucial for importers and customs brokers to ensure accurate valuation and correct application of the duty rate.
What are the key classification criteria to ensure goods are correctly classified under HS code 400819?
HS code 400819 is a residual category for products of vulcanized rubber that do not fit into more specific subheadings of 4008. The primary criteria are that the goods must be made of vulcanized rubber and not be in the form of sheets, strips, or profiles (which fall under 4008.11), nor be shaped or otherwise worked into specific articles. Examples might include molded rubber components for industrial machinery or specialized rubber seals not fitting other descriptions. Misclassification can occur if goods are actually unvulcanized rubber, or if they are shaped or worked into specific forms covered by other HS codes.
What documentation is typically required for importing goods classified under HS code 400819?
Standard documentation for importing goods under HS code 400819 generally includes a commercial invoice detailing the value, quantity, and description of the goods; a packing list; and a bill of lading or air waybill. Depending on the origin and specific nature of the 'other' vulcanized rubber products, additional documentation might be required, such as a Certificate of Origin (especially if claiming preferential duty rates under a trade agreement), or specific product certifications if the goods are subject to safety or regulatory standards. Customs brokers should verify specific requirements with the importing country's customs authority.
Which major trade agreements might offer reduced duty rates for HS code 400819 into the United States?
Several trade agreements can provide preferential duty rates for HS code 400819 into the United States. Key agreements include the United States-Mexico-Canada Agreement (USMCA), which may offer duty-free or reduced rates for qualifying goods originating from Canada or Mexico. Other agreements, such as those with Australia, Chile, Singapore, and South Korea, also provide preferential access. To benefit, importers must ensure the goods meet the rules of origin stipulated in the relevant agreement and provide a valid Certificate of Origin. Consulting the HTSUS and the specific text of each trade agreement is essential for accurate determination.