HS 391910 In rolls of a width not exceeding 20 cm
Quick Answer: Self-adhesive plates, sheets, film, foil, tape, and other flat shapes, of plastics, in rolls of a width not exceeding 20 cm, enter the UK at 6.00%, the EU at 6.30%, and the US at 6.5% ad valorem under the Most Favored Nation (MFN) tariff. This classification specifically applies to these plastic materials when presented in narrow roll form, distinguishing them from wider formats. Importers should be aware that preferential duty rates may apply in the US for certain trading partners. CustomTariffs aggregates this data, highlighting the importance of precise classification for accurate duty assessment.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 3919101200 | 6.00 % | — | — |
| 3919101900 | 6.00 % | — | — |
| 3919101990 | 6.00 % | — | — |
| 3919100000 | — | — | — |
| 3919101500 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 3919100000 | — | — | — |
| 3919101200 | 6.30 % | — | — |
| 3919101500 | 6.30 % | — | — |
| 3919101900 | 6.30 % | — | — |
| 3919101910 | 6.30 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 39191010 | 6.5% | Free (17 programs) | — |
| 3919101050 | — | — | ["kg"] |
| 3919102010 | — | — | ["m<sup>2</sup>","kg"] |
| 3919102030 | — | — | ["m<sup>2</sup>","kg"] |
| 3919102055 | — | — | ["m<sup>2</sup>","kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 3919.10?
Imports of In rolls of a width not exceeding 20 cm may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, GSP, and 14 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 391910 cover?
This subheading covers self-adhesive plates, sheets, film, foil, tape, and other flat shapes, of plastics, whether or not in rolls, provided that their width does not exceed 20 cm. As per the World Customs Organization's Harmonized System Explanatory Notes for Heading 3919, this category includes items like self-adhesive plastic tapes used for packaging, sealing, or decorative purposes, as well as plastic films with adhesive backing. The USITC Harmonized Tariff Schedule (HTS) further clarifies that this classification is contingent upon the material being plastic and possessing adhesive properties, presented in a flat form with the specified width limitation.
What falls outside HS 391910?
The following products are excluded from HS 391910: self-adhesive plastics in forms other than flat shapes, such as extruded profiles or molded articles, and those in rolls exceeding 20 cm in width. Additionally, non-adhesive plastic films, tapes, or sheets, even if presented in rolls, are classified elsewhere, typically under headings like 3919.90 for "Other" self-adhesive plastics or other relevant chapter headings for non-adhesive plastic sheeting. For instance, plain plastic wrap for food preservation, lacking adhesive properties, would not fall under this subheading.
What are common classification mistakes for HS 391910?
A common error is misinterpreting the width limitation of 20 cm. Importers may incorrectly classify wider rolls of self-adhesive plastic tape or sheeting under this subheading, when they should be classified under HS 3919.90 ("Other"). Another mistake involves confusing self-adhesive plastics with non-adhesive ones; General Rule of Interpretation (GRI) 1 of the Harmonized System emphasizes that classification shall be determined according to the terms of the headings and any relative Section or Chapter Notes. For example, a roll of plain polyethylene film without adhesive is not covered.
How should importers classify products under HS 391910?
The correct procedure for classifying products under HS 391910 involves a multi-step process. First, confirm the product is made of plastic and possesses self-adhesive properties. Second, verify that it is presented in a flat shape, such as a sheet, tape, or foil. Third, meticulously measure the width of the roll; if it does not exceed 20 cm, then HS 391910 is applicable. Importers and customs brokers should consult the official tariff schedules of the importing country, such as the USITC HTS or the EU TARIC, for definitive guidance and any specific subheadings.
How is the duty calculated for products under HS 391910?
A roll of 1 cm wide, self-adhesive plastic tape for electrical insulation, weighing 0.5 kg and declared at a customs value of $50 USD, would attract a US duty of $3.50. This is calculated using the Most Favored Nation (MFN) duty rate of 7% ad valorem, applied to the declared value: 7% of $50 USD = $3.50. This calculation is based on the specific product description and the duty rate published in the USITC Harmonized Tariff Schedule for HS code 3919.10.1000.
Which trade agreements reduce duties for HS 391910?
Several free trade agreements may reduce the applicable duty rate for HS 391910, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for originating goods from Canada and Mexico. The European Union's Generalized System of Preferences (GSP) may offer preferential rates for certain developing countries, potentially reducing duties to Free. To claim these preferences, importers typically require a self-certified origin statement for USMCA or a EUR.1 movement certificate for EU preferences, depending on the specific agreement and jurisdiction.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 391910, 'Plates, sheets, film, foil and strip, of plastics, self-adhesive, in rolls of a width not exceeding 20 cm'?
The Most Favored Nation (MFN) duty rate for HS code 391910 can vary. For example, under the US Harmonized Tariff Schedule (HTS), the general rate is 6.5% ad valorem. However, preferential rates apply under various trade agreements. For instance, goods from Australia (AU), Canada (CA), Mexico (MX), and South Korea (KR) may have different rates, potentially including free entry or reduced tariffs, depending on the specific agreement and product origin. Always consult the latest HTSUS or relevant trade agreement text for the definitive rate applicable to your shipment's origin.
How is the import duty for HS 391910 calculated, and can you provide an example?
Import duty for HS code 391910 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared customs value of the goods. For example, if you import 1,000 square meters of self-adhesive plastic film (falling under HS 391910) with a declared customs value of $500, and the applicable MFN duty rate is 6.5%, the duty would be calculated as: 6.5% of $500 = $32.50. Some classifications might also involve specific duties (per unit), but for 391910, ad valorem is most common. Always confirm the basis of duty calculation with the official tariff schedule.
What specific criteria determine if self-adhesive plastic sheeting falls under HS code 391910 versus other classifications?
The primary criteria for HS code 391910 are: 1) The material must be plastic. 2) It must be self-adhesive. 3) It must be presented in rolls. 4) Crucially, the width of the roll must not exceed 20 cm. If the width exceeds 20 cm, it would likely be classified under a different subheading, such as 3919.90 (for other widths). The nature of the adhesive and the specific type of plastic are secondary to these primary criteria for this particular subheading.
What documentation is typically required for importing goods classified under HS 391910?
Standard import documentation for HS code 391910 generally includes a commercial invoice detailing the description, quantity, value, and origin of the goods; a packing list specifying the contents of each package; and a bill of lading or air waybill for transportation. Depending on the country of import and origin, a certificate of origin may be required to claim preferential duty rates under trade agreements. Importers should also be prepared to provide product specifications or technical data sheets if requested by customs authorities to verify classification.
Which major trade agreements offer preferential duty rates for HS 391910, and how can importers benefit?
Several trade agreements can provide preferential duty rates for HS 391910. For example, the United States has agreements like the USMCA (United States-Mexico-Canada Agreement) and bilateral agreements with countries like South Korea (KORUS FTA). The European Union's TARIC system lists preferential rates for goods originating from countries with which the EU has trade agreements. To benefit, importers must ensure the goods meet the rules of origin stipulated in the relevant trade agreement and possess the necessary proof of origin documentation, such as a EUR.1 certificate or an origin declaration on the invoice, as specified by the importing country's customs authority.