HS 382410 Prepared binders for foundry moulds or cores
Quick Answer: Prepared binders for foundry moulds or cores imported under HS 382410 enter the UK at 6.00%, the EU at 6.50%, and the US at 6% (MFN). This classification covers chemical preparations used to bind sand or other materials together to form moulds and cores for metal casting. These binders are essential for the foundry industry, providing strength and stability to the moulds during the casting process. Importers should be aware of potential variations in duty rates based on specific trade agreements, particularly in the United States where certain countries benefit from duty-free entry. CustomTariffs aggregates this data to assist in compliance.
What Are the Import Duty Rates?
🇬🇧 United Kingdom
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 3824100000 | 6.00 % | — | — |
| 3824100010 | 6.00 % | — | — |
| 3824100090 | 6.00 % | — | — |
🇪🇺 European Union (TARIC)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 3824100000 | 6.50 % | — | — |
| 3824100010 | 6.50 % | — | — |
| 3824100090 | 6.50 % | — | — |
🇺🇸 United States (HTSUS)
| Code | MFN | Preferential | Unit |
|---|---|---|---|
| 3824100000 | 6% | Free (17 programs) | ["kg"] |
Special rates available under trade agreements including USMCA, KORUS, GSP.
Duty rates sourced from the USITC (US International Trade Commission) Harmonized Tariff Schedule (HTS) (accessed 2/22/2026), EU TARIC – DG TAXUD (Directorate-General for Taxation and Customs Union) (accessed 2/22/2026), and UK Trade Tariff – HMRC (His Majesty's Revenue and Customs) (accessed 2/22/2026).
Data compiled and presented by HSRates.
Which Trade Agreements Reduce Duties for HS 3824.10?
Imports of Prepared binders for foundry moulds or cores may qualify for reduced or zero duty rates under free trade agreements and preferential programs. The overview below shows available preferential arrangements by jurisdiction, compiled by HSRates from official tariff and trade agreement data.
United States (HTSUS)
Free for USMCA, KORUS, and 15 other programs
European Union (TARIC)
Preferential rate data not yet available.
United Kingdom
Preferential rate data not yet available.
Preferential rates require proof of origin and may be subject to quotas or conditions. Always verify eligibility with a licensed customs broker.
Data compiled by HSRates.
Which Preferential Rates Apply to Your Origin Country?
Select an origin country to see if preferential rates apply.
Preferential rates based on available trade agreements. Actual rates may vary.
How Has Trade Volume Developed?
Trade Volume 2023
How to Classify This HS Code?
What products does HS 382410 cover?
This subheading covers prepared binders specifically designed for use in the manufacture of foundry moulds or cores. According to the World Customs Organization's Harmonized System Explanatory Notes, these are typically chemical preparations that, when mixed with sand or other foundry materials, act as a binding agent to form the mould or core. The US International Trade Commission (USITC) Harmonized Tariff Schedule (HTS) and the EU's TARIC database confirm this scope, encompassing products like resin-based binders, inorganic binders, or other chemical mixtures formulated for this specialized industrial application, often sold in liquid or powder form.
What falls outside HS 382410?
The following products are excluded from HS 382410: general-purpose binders not specifically formulated for foundry applications, such as common glues or adhesives used in other industries. Also excluded are the raw materials used to make these binders, like pure resins or inorganic compounds before they are prepared and mixed for foundry use. For instance, a simple industrial adhesive for packaging, or bulk quantities of sodium silicate not yet prepared as a foundry binder, would be classified elsewhere, typically under headings related to their primary chemical composition or function.
What are common classification mistakes for HS 382410?
A common error is misclassifying products that are related to foundry operations but are not prepared binders for moulds or cores. For example, refractory materials used to line furnaces, or release agents applied to moulds to prevent sticking, are often confused. According to General Interpretative Rule 3(b) of the Harmonized System, classification is based on the essential character of the product; therefore, a product that is primarily a refractory material, even if it contains some binding agents, would not fall under 382410. Importers must ensure the product's primary function is binding foundry mould or core materials.
How should importers classify products under HS 382410?
The correct procedure for classifying products under HS 382410 involves a detailed examination of the product's composition, intended use, and marketing. Importers and customs brokers should consult the product's technical data sheet and Safety Data Sheet (SDS) to understand its chemical makeup and specific application. Cross-referencing this information with the WCO HS Explanatory Notes and the relevant national tariff schedule, such as the USITC HTS or the UK Trade Tariff, is crucial. If uncertainty remains, seeking a binding ruling from customs authorities is recommended to ensure accurate classification and avoid potential penalties.
How is the duty calculated for products under HS 382410?
A shipment of 1,000 kg of a phenolic resin-based foundry binder, declared at a customs value of $2,500 USD, would attract a US duty of $125.00 USD. This is calculated using the Most Favored Nation (MFN) duty rate of 5.0% ad valorem, applied to the declared customs value ($2,500 USD × 0.05 = $125.00 USD). This rate is published in the USITC Harmonized Tariff Schedule. If the product were a specific inorganic binder with a per-kilogram duty, the calculation would be rate × quantity.
Which trade agreements reduce duties for HS 382410?
Several free trade agreements may reduce the applicable duty rate for HS 382410, including the United States-Mexico-Canada Agreement (USMCA), which can result in a duty rate of Free for qualifying originating goods from Canada and Mexico. The Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP) may also offer preferential rates for originating goods from member countries like Vietnam. To claim these preferences, a self-certified origin statement or a specific origin declaration, as required by the importing country's customs regulations, is typically needed.
```Which HS Codes Are Related?
Not the right code? Search all HS codes to find the correct tariff classification.
FAQ
What are the typical import duty rates for HS code 382410, 'Prepared binders for foundry moulds or cores'?
The Most Favored Nation (MFN) duty rate for HS code 382410 can vary. For example, the United States applies a 6.5% ad valorem duty rate. The European Union's TARIC system may show rates such as 6.00% ad valorem. The UK Trade Tariff also lists a 6.50% ad valorem duty. It is crucial to consult the specific tariff schedule of the importing country at the time of importation, as rates can change. For specific preferential rates, consult the relevant trade agreement schedules.
How is the duty for HS code 382410 calculated? Can you provide an example?
The duty for HS code 382410 is typically calculated on an ad valorem basis, meaning it's a percentage of the declared value of the goods. For instance, if a shipment of prepared binders valued at $10,000 is imported into the United States, and the MFN duty rate is 6.5%, the import duty would be $10,000 (value) × 0.065 (duty rate) = $650. Always ensure the declared value is accurate and includes all assessable costs as per customs regulations.
What are the key classification criteria for goods to be classified under HS code 382410?
HS code 382410 covers 'Prepared binders for foundry moulds or cores'. The key classification criterion is that the product must be specifically prepared and intended for use as a binder in the creation of foundry moulds or cores. These binders typically contain organic or inorganic substances that, when mixed with sand or other foundry aggregates, provide the necessary cohesion to form the mould or core. Products that are merely raw materials or general-purpose adhesives not specifically formulated for foundry applications would likely be classified elsewhere.
Which trade agreements offer preferential duty rates for HS code 382410, and what documentation is typically required?
Several trade agreements can provide preferential duty rates for HS code 382410. For example, under the USMCA (United States-Mexico-Canada Agreement), goods originating from Canada or Mexico may qualify for duty-free entry or reduced rates. The USITC's Harmonized Tariff Schedule lists specific preferential rates for various countries and trade blocs (e.g., 'Free (A+,AU,BH,CL,CO,D,E, IL,JO, KR,MA,OM,P, PA,PE,S,SG)' indicates duty-free status for goods from these regions under specific agreements). To claim preferential treatment, importers typically need to provide a Certificate of Origin or a declaration of origin, demonstrating that the goods meet the rules of origin stipulated in the relevant trade agreement. Always verify the specific requirements of the applicable trade agreement.
Are there any specific documentation requirements beyond a commercial invoice and packing list for importing prepared binders under HS 382410?
While a commercial invoice, packing list, and bill of lading are standard import documents, for HS code 382410, the most critical additional documentation relates to classification and origin. Importers should be prepared to provide a detailed product description, including the chemical composition and intended use, to substantiate the classification as 'prepared binders for foundry moulds or cores'. If claiming preferential duty rates under a trade agreement, a valid Certificate of Origin or a declaration of origin is mandatory. In some cases, customs authorities might request Safety Data Sheets (SDS) or technical data sheets to verify product specifications and ensure compliance with any applicable safety or environmental regulations.